| Message ID | b22e5799fe16a6902f95a8bd3f0f41f5a260c1ad.1598421453.git.mchehab+huawei@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dtbs: hikey970: add wifi support | expand |
On 2020-08-26 06:57, Mauro Carvalho Chehab wrote: > The dwmmc2 is used on Hikey 970 for WiFi support. The > hi3670.dtsi adds it, but with status="disabled". > > For WiFi to work,it needs to be enabled. While here, add > the missing properties: > > #address-cells = <0x1>; > #size-cells = <0x0>; > > and add > ti,non-removable > > To DT properties, as the WiFi support is on a non-removable slot. > > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> > --- > arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts > index f218acceec0b..a2b0d2a1d09d 100644 > --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts > +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts > @@ -402,6 +402,7 @@ &sd_clk_cfg_func > > &dwmmc2 { /* WIFI */ > bus-width = <0x4>; > + ti,non-removable; Why? This property is only defined for OMAP HSMMC controllers, which this isn't, and you've already got the proper generic property right there below. Plus in terms of Linux it will have zero effect, since it's only parsed by the omap_hsmmc driver anyway. > non-removable; > broken-cd; > cap-power-off-card; > @@ -409,8 +410,12 @@ &dwmmc2 { /* WIFI */ > pinctrl-0 = <&sdio_pmx_func > &sdio_clk_cfg_func > &sdio_cfg_func>; > + status = "ok"; Have you noticed the context 6 lines below? > + > /* WL_EN */ > vmmc-supply = <&wlan_en>; > + #address-cells = <0x1>; > + #size-cells = <0x0>; These are already present in hi3670.dtsi. AFAICS Wifi support was merged 18 months ago :/ Robin. > status = "ok"; > > wlcore: wlcore@2 { >
Em Wed, 26 Aug 2020 13:41:49 +0100 Robin Murphy <robin.murphy@arm.com> escreveu: > On 2020-08-26 06:57, Mauro Carvalho Chehab wrote: > > The dwmmc2 is used on Hikey 970 for WiFi support. The > > hi3670.dtsi adds it, but with status="disabled". > > > > For WiFi to work,it needs to be enabled. While here, add > > the missing properties: > > > > #address-cells = <0x1>; > > #size-cells = <0x0>; > > > > and add > > ti,non-removable > > > > To DT properties, as the WiFi support is on a non-removable slot. > > > > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> > > --- > > arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts > > index f218acceec0b..a2b0d2a1d09d 100644 > > --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts > > +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts > > @@ -402,6 +402,7 @@ &sd_clk_cfg_func > > > > &dwmmc2 { /* WIFI */ > > bus-width = <0x4>; > > + ti,non-removable; > > Why? This property is only defined for OMAP HSMMC controllers, which > this isn't, and you've already got the proper generic property right > there below. Plus in terms of Linux it will have zero effect, since it's > only parsed by the omap_hsmmc driver anyway. > > > non-removable; > > broken-cd; > > cap-power-off-card; > > @@ -409,8 +410,12 @@ &dwmmc2 { /* WIFI */ > > pinctrl-0 = <&sdio_pmx_func > > &sdio_clk_cfg_func > > &sdio_cfg_func>; > > + status = "ok"; > > Have you noticed the context 6 lines below? > > > + > > /* WL_EN */ > > vmmc-supply = <&wlan_en>; > > + #address-cells = <0x1>; > > + #size-cells = <0x0>; > > These are already present in hi3670.dtsi. AFAICS Wifi support was merged > 18 months ago :/ My mistake! It seems that I need more caffeine today. I wrote this patch for an older Kernel version (4.19). I ended porting it to 5.8, with also required another patch, due to a regression between Kernel 5.7 and 5.8: https://lore.kernel.org/lkml/f0a2cb7ea606f1a284d4c23cbf983da2954ce9b6.1598420968.git.mchehab+huawei@kernel.org/ Thanks, Mauro
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts index f218acceec0b..a2b0d2a1d09d 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts @@ -402,6 +402,7 @@ &sd_clk_cfg_func &dwmmc2 { /* WIFI */ bus-width = <0x4>; + ti,non-removable; non-removable; broken-cd; cap-power-off-card; @@ -409,8 +410,12 @@ &dwmmc2 { /* WIFI */ pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>; + status = "ok"; + /* WL_EN */ vmmc-supply = <&wlan_en>; + #address-cells = <0x1>; + #size-cells = <0x0>; status = "ok"; wlcore: wlcore@2 {
The dwmmc2 is used on Hikey 970 for WiFi support. The hi3670.dtsi adds it, but with status="disabled". For WiFi to work,it needs to be enabled. While here, add the missing properties: #address-cells = <0x1>; #size-cells = <0x0>; and add ti,non-removable To DT properties, as the WiFi support is on a non-removable slot. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts | 5 +++++ 1 file changed, 5 insertions(+)