@@ -13,7 +13,7 @@
spi-max-frequency = <26000000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
- #interrupt-cells = <2>;
+ #interrupt-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -43,14 +43,14 @@
compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc";
reg = <0x280>;
interrupt-parent = <&sc2731_pmic>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <2>;
};
pmic_eic: gpio@300 {
compatible = "sprd,sc27xx-eic";
reg = <0x300>;
interrupt-parent = <&sc2731_pmic>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <5>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -69,7 +69,7 @@
compatible = "sprd,sc27xx-adc", "sprd,sc2731-adc";
reg = <0x480>;
interrupt-parent = <&sc2731_pmic>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
#io-channel-cells = <1>;
hwlocks = <&hwlock 4>;
};
The Spreadtrum PMIC INTC controller has no registers to set trigger type, since it is always high level trigger as default. So remove its child devices' irq trigger type setting and change #interrupt-cells to 1. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> --- arch/arm64/boot/dts/sprd/sc2731.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)