diff mbox

[1/2] ARM: dts: dra7-evm: Remove pinmux configurations for erratum i869

Message ID b80e3cbc8a377abdb40ab11de78ce0b3fb67596f.1480411308.git.nsekhar@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Sekhar Nori Nov. 29, 2016, 9:24 a.m. UTC 
Pinmuxing for DRA7x/AM57x family of processors need to be done in IO
isolation as part of initial bootloader executed from SRAM. This is
done as part of iodelay configuration sequence and is required due
to the limitations introduced by erratum ID: i869[1] (IO Glitches
can occur when changing IO settings) and elaborated in the Technical
Reference Manual[2] 18.4.6.1.7 Isolation Requirements.

Only peripheral that is permitted for dynamic pin mux configuration
is MMC and DCAN. MMC is permitted to change to accommodate the
requirements for varied speeds (which require IO-delay support in
kernel as well). DCAN is a result of i893[1] (DCAN initialization
sequence).

DCAN pinmux is retained in this patch. MMC pinmux is missing from
the dra7-evm.dts file and the board is relying on configuration done
by bootloader. A subsequent patch will add MMC pinmux configuration.

A side-effect of this patch is that NAND support is removed. NAND
pins clash with VOUT3 on DRA7-EVM. U-Boot selects VOUT3 over NAND
as per TI EVM application needs.

[1] http://www.ti.com/lit/pdf/sprz429
[2] http://www.ti.com/lit/pdf/sprui30

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 arch/arm/boot/dts/dra7-evm.dts | 260 -----------------------------------------
 1 file changed, 260 deletions(-)

Comments

Sekhar Nori Dec. 13, 2016, 9:56 a.m. UTC | #1 
On Tuesday 29 November 2016 02:54 PM, Sekhar Nori wrote:

> A side-effect of this patch is that NAND support is removed. NAND
> pins clash with VOUT3 on DRA7-EVM. U-Boot selects VOUT3 over NAND
> as per TI EVM application needs.

I claimed this ..

>  &gpmc {
>  	status = "okay";
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&nand_flash_x16>;
>  	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
>  	nand@0,0 {
>  		compatible = "ti,omap2-nand";

.. but forgot to keep the gpmc node disabled. I will fix this and send a
v2. dra72-evm-common.dtsi needs a similar patch. Will include that in v2
as well.

Thanks,
Sekhar
diff mbox

Patch

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 132f2be10889..a1efd4efed6d 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -151,204 +151,6 @@ 
 };
 
 &dra7_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&vtt_pin>;
-
-	vtt_pin: pinmux_vtt_pin {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
-			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
-			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
-			DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */
-			DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */
-			DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */
-			DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
-			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
-			DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
-		>;
-	};
-
-	mcspi2_pins: pinmux_mcspi2_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */
-			DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
-			DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
-			DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
-			DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
-			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
-			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */
-			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */
-			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
-			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
-			DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
-		>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-                pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
-                >;
-        };
-
-	usb2_pins: pinmux_usb2_pins {
-                pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
-                >;
-        };
-
-	nand_flash_x16: nand_flash_x16 {
-		/* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
-		 * So NAND flash requires following switch settings:
-		 * SW5.1 (NAND_BOOTn) = ON (LOW)
-		 * SW5.9 (GPMC_WPN) = OFF (HIGH)
-		 */
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0	*/
-			DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1	*/
-			DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2	*/
-			DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3	*/
-			DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4	*/
-			DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5	*/
-			DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6	*/
-			DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7	*/
-			DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad8	*/
-			DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad9	*/
-			DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad10	*/
-			DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad11	*/
-			DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad12	*/
-			DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad13	*/
-			DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad14	*/
-			DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad15	*/
-			DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP  | MUX_MODE0)	/* gpmc_wait0	*/
-			DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0)	/* gpmc_wen	*/
-			DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0	*/
-			DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0)	/* gpmc_advn_ale */
-			DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0)	/* gpmc_oen_ren	 */
-			DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0)	/* gpmc_be0n_cle */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txc.rgmii0_txc */
-			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txctl.rgmii0_txctl */
-			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3.rgmii0_txd3 */
-			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd2.rgmii0_txd2 */
-			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd1.rgmii0_txd1 */
-			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd0.rgmii0_txd0 */
-			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxc.rgmii0_rxc */
-			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxctl.rgmii0_rxctl */
-			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd3.rgmii0_rxd3 */
-			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd2.rgmii0_rxd2 */
-			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd1.rgmii0_rxd1 */
-			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd0.rgmii0_rxd0 */
-
-			/* Slave 2 */
-			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
-			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
-			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
-			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
-			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
-			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
-			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
-			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
-			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
-			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
-			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
-			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
-		>;
-
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15)
-
-			/* Slave 2 */
-			DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
-			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
-		>;
-	};
-
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
@@ -362,37 +164,10 @@ 
 			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
 		>;
 	};
-
-	atl_pins: pinmux_atl_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5)	/* xref_clk1.atl_clk1 */
-			DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5)	/* xref_clk2.atl_clk2 */
-		>;
-	};
-
-	mcasp3_pins: pinmux_mcasp3_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_aclkx */
-			DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_fsx */
-			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr0 */
-			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr1 */
-		>;
-	};
-
-	mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15)
-		>;
-	};
 };
 
 &i2c1 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
 	tps659038: tps659038@58 {
@@ -581,8 +356,6 @@ 
 
 &i2c2 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 
 	pcf_hdmi: gpio@26 {
@@ -602,41 +375,29 @@ 
 
 &i2c3 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
 	clock-frequency = <400000>;
 };
 
 &mcspi1 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
 };
 
 &mcspi2 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi2_pins>;
 };
 
 &uart1 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
 	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
 			      <&dra7_pmx_core 0x3e0>;
 };
 
 &uart2 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
 };
 
 &uart3 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
 };
 
 &mmc1 {
@@ -732,14 +493,10 @@ 
 
 &usb1 {
 	dr_mode = "peripheral";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
 };
 
 &usb2 {
 	dr_mode = "host";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_pins>;
 };
 
 &elm {
@@ -748,8 +505,6 @@ 
 
 &gpmc {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_flash_x16>;
 	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
@@ -845,9 +600,6 @@ 
 
 &mac {
 	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
 	dual_emac;
 };
 
@@ -863,12 +615,6 @@ 
 	dual_emac_res_vlan = <2>;
 };
 
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-};
-
 &dcan1 {
 	status = "ok";
 	pinctrl-names = "default", "sleep", "active";
@@ -878,9 +624,6 @@ 
 };
 
 &atl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&atl_pins>;
-
 	assigned-clocks = <&abe_dpll_sys_clk_mux>,
 			  <&atl_gfclk_mux>,
 			  <&dpll_abe_ck>,
@@ -899,9 +642,6 @@ 
 
 &mcasp3 {
 	#sound-dai-cells = <0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp3_pins>;
-	pinctrl-1 = <&mcasp3_sleep_pins>;
 
 	assigned-clocks = <&mcasp3_ahclkx_mux>;
 	assigned-clock-parents = <&atl_clkin2_ck>;