diff mbox series

[v6,2/5] clk: imx: Mark dram pll on 8mm and 8mn with CLK_GET_RATE_NOCACHE

Message ID c37137eac4cb4be5384d807e2b329b12de0e8f6b.1573756360.git.leonard.crestez@nxp.com (mailing list archive)
State Superseded
Headers show
Series PM / devfreq: Add dynamic scaling for imx8m ddr controller | expand

Commit Message

Leonard Crestez Nov. 14, 2019, 6:33 p.m. UTC
DRAM frequency switches are executed in firmware and can change the
configuration of the DRAM PLL outside linux. Mark these CLKs with
CLK_GET_RATE_NOCACHE so we always read back the PLL config registers and
recalculate rates.

In current DRAM frequency tables on 8mm/8mn only the maximum frequency
uses the PLL so it's always configured in the same way. However reading
back the PLL configuration is the correct behavior and allows additional
setpoints in the future.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
---
 drivers/clk/imx/clk-imx8mm.c  | 2 +-
 drivers/clk/imx/clk-imx8mn.c  | 2 +-
 drivers/clk/imx/clk-pll14xx.c | 7 +++++++
 drivers/clk/imx/clk.h         | 1 +
 4 files changed, 10 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index e2bc3c90d93c..9246e89bb5fd 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -326,11 +326,11 @@  static int imx8mm_clocks_probe(struct platform_device *pdev)
 	clks[IMX8MM_SYS_PLL3_REF_SEL] = imx_clk_mux("sys_pll3_ref_sel", base + 0x114, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
 
 	clks[IMX8MM_AUDIO_PLL1] = imx_clk_pll14xx("audio_pll1", "audio_pll1_ref_sel", base, &imx_1443x_pll);
 	clks[IMX8MM_AUDIO_PLL2] = imx_clk_pll14xx("audio_pll2", "audio_pll2_ref_sel", base + 0x14, &imx_1443x_pll);
 	clks[IMX8MM_VIDEO_PLL1] = imx_clk_pll14xx("video_pll1", "video_pll1_ref_sel", base + 0x28, &imx_1443x_pll);
-	clks[IMX8MM_DRAM_PLL] = imx_clk_pll14xx("dram_pll", "dram_pll_ref_sel", base + 0x50, &imx_1443x_pll);
+	clks[IMX8MM_DRAM_PLL] = imx_clk_pll14xx("dram_pll", "dram_pll_ref_sel", base + 0x50, &imx_1443x_dram_pll);
 	clks[IMX8MM_GPU_PLL] = imx_clk_pll14xx("gpu_pll", "gpu_pll_ref_sel", base + 0x64, &imx_1416x_pll);
 	clks[IMX8MM_VPU_PLL] = imx_clk_pll14xx("vpu_pll", "vpu_pll_ref_sel", base + 0x74, &imx_1416x_pll);
 	clks[IMX8MM_ARM_PLL] = imx_clk_pll14xx("arm_pll", "arm_pll_ref_sel", base + 0x84, &imx_1416x_pll);
 	clks[IMX8MM_SYS_PLL1] = imx_clk_fixed("sys_pll1", 800000000);
 	clks[IMX8MM_SYS_PLL2] = imx_clk_fixed("sys_pll2", 1000000000);
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index de905e278b80..4749beab9fc8 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -323,11 +323,11 @@  static int imx8mn_clocks_probe(struct platform_device *pdev)
 	clks[IMX8MN_SYS_PLL3_REF_SEL] = imx_clk_mux("sys_pll3_ref_sel", base + 0x114, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
 
 	clks[IMX8MN_AUDIO_PLL1] = imx_clk_pll14xx("audio_pll1", "audio_pll1_ref_sel", base, &imx_1443x_pll);
 	clks[IMX8MN_AUDIO_PLL2] = imx_clk_pll14xx("audio_pll2", "audio_pll2_ref_sel", base + 0x14, &imx_1443x_pll);
 	clks[IMX8MN_VIDEO_PLL1] = imx_clk_pll14xx("video_pll1", "video_pll1_ref_sel", base + 0x28, &imx_1443x_pll);
-	clks[IMX8MN_DRAM_PLL] = imx_clk_pll14xx("dram_pll", "dram_pll_ref_sel", base + 0x50, &imx_1443x_pll);
+	clks[IMX8MN_DRAM_PLL] = imx_clk_pll14xx("dram_pll", "dram_pll_ref_sel", base + 0x50, &imx_1443x_dram_pll);
 	clks[IMX8MN_GPU_PLL] = imx_clk_pll14xx("gpu_pll", "gpu_pll_ref_sel", base + 0x64, &imx_1416x_pll);
 	clks[IMX8MN_VPU_PLL] = imx_clk_pll14xx("vpu_pll", "vpu_pll_ref_sel", base + 0x74, &imx_1416x_pll);
 	clks[IMX8MN_ARM_PLL] = imx_clk_pll14xx("arm_pll", "arm_pll_ref_sel", base + 0x84, &imx_1416x_pll);
 	clks[IMX8MN_SYS_PLL1] = imx_clk_fixed("sys_pll1", 800000000);
 	clks[IMX8MN_SYS_PLL2] = imx_clk_fixed("sys_pll2", 1000000000);
diff --git a/drivers/clk/imx/clk-pll14xx.c b/drivers/clk/imx/clk-pll14xx.c
index 5c458199060a..a6d31a7262ef 100644
--- a/drivers/clk/imx/clk-pll14xx.c
+++ b/drivers/clk/imx/clk-pll14xx.c
@@ -65,10 +65,17 @@  struct imx_pll14xx_clk imx_1443x_pll = {
 	.type = PLL_1443X,
 	.rate_table = imx_pll1443x_tbl,
 	.rate_count = ARRAY_SIZE(imx_pll1443x_tbl),
 };
 
+struct imx_pll14xx_clk imx_1443x_dram_pll = {
+	.type = PLL_1443X,
+	.rate_table = imx_pll1443x_tbl,
+	.rate_count = ARRAY_SIZE(imx_pll1443x_tbl),
+	.flags = CLK_GET_RATE_NOCACHE,
+};
+
 struct imx_pll14xx_clk imx_1416x_pll = {
 	.type = PLL_1416X,
 	.rate_table = imx_pll1416x_tbl,
 	.rate_count = ARRAY_SIZE(imx_pll1416x_tbl),
 };
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index bc5bb6ac8636..81122c9ab842 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -50,10 +50,11 @@  struct imx_pll14xx_clk {
 	int flags;
 };
 
 extern struct imx_pll14xx_clk imx_1416x_pll;
 extern struct imx_pll14xx_clk imx_1443x_pll;
+extern struct imx_pll14xx_clk imx_1443x_dram_pll;
 
 #define imx_clk_cpu(name, parent_name, div, mux, pll, step) \
 	imx_clk_hw_cpu(name, parent_name, div, mux, pll, step)->clk
 
 #define clk_register_gate2(dev, name, parent_name, flags, reg, bit_idx, \