@@ -75,10 +75,28 @@
&A53_0 {
cpu-supply = <&buck2_reg>;
};
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ opp-750M {
+ opp-hz = /bits/ 64 <750000000>;
+ };
+ };
+};
+
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <ðphy0>;
@@ -856,10 +856,20 @@
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+ ddrc: memory-controller@3d400000 {
+ compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+ reg = <0x3d400000 0x400000>;
+ clock-names = "core", "pll", "alt", "apb";
+ clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+ <&clk IMX8MM_DRAM_PLL>,
+ <&clk IMX8MM_CLK_DRAM_ALT>,
+ <&clk IMX8MM_CLK_DRAM_APB>;
+ };
+
ddr-pmu@3d800000 {
compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
reg = <0x3d800000 0x400000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -15,10 +15,28 @@
&A53_0 {
cpu-supply = <&buck2_reg>;
};
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ opp-600M {
+ opp-hz = /bits/ 64 <600000000>;
+ };
+ };
+};
+
&i2c1 {
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
pinctrl-0 = <&pinctrl_pmic>;
@@ -757,10 +757,20 @@
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+ ddrc: memory-controller@3d400000 {
+ compatible = "fsl,imx8mn-ddrc", "fsl,imx8m-ddrc";
+ reg = <0x3d400000 0x400000>;
+ clock-names = "core", "pll", "alt", "apb";
+ clocks = <&clk IMX8MN_CLK_DRAM_CORE>,
+ <&clk IMX8MN_DRAM_PLL>,
+ <&clk IMX8MN_CLK_DRAM_ALT>,
+ <&clk IMX8MN_CLK_DRAM_APB>;
+ };
+
ddr-pmu@3d800000 {
compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu";
reg = <0x3d800000 0x400000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -103,10 +103,34 @@
&A53_3 {
cpu-supply = <&buck2_reg>;
};
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ /*
+ * On imx8mq B0 PLL can't be bypassed so low bus is 166M
+ */
+ opp-166M {
+ opp-hz = /bits/ 64 <166935483>;
+ };
+ opp-800M {
+ opp-hz = /bits/ 64 <800000000>;
+ };
+ };
+};
+
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <ðphy0>;
@@ -1111,10 +1111,20 @@
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
};
+ ddrc: memory-controller@3d400000 {
+ compatible = "fsl,imx8mq-ddrc", "fsl,imx8m-ddrc";
+ reg = <0x3d400000 0x400000>;
+ clock-names = "core", "pll", "alt", "apb";
+ clocks = <&clk IMX8MQ_CLK_DRAM_CORE>,
+ <&clk IMX8MQ_DRAM_PLL_OUT>,
+ <&clk IMX8MQ_CLK_DRAM_ALT>,
+ <&clk IMX8MQ_CLK_DRAM_APB>;
+ };
+
ddr-pmu@3d800000 {
compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu";
reg = <0x3d800000 0x400000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
This is used by the imx-ddrc devfreq driver to implement dynamic frequency scaling of DRAM. Support for proactive scaling via interconnect will come later. The high-performance bus masters which need that (display, vpu, gpu) are mostly not yet enabled in upstream anyway. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> --- arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 18 ++++++++++++++ arch/arm64/boot/dts/freescale/imx8mm.dtsi | 10 ++++++++ .../boot/dts/freescale/imx8mn-ddr4-evk.dts | 18 ++++++++++++++ arch/arm64/boot/dts/freescale/imx8mn.dtsi | 10 ++++++++ arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 24 +++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8mq.dtsi | 10 ++++++++ 6 files changed, 90 insertions(+)