| Message ID | ca94fddbb790d2c4de25213c65e306f497e119e7.1622119892.git.cristian.ciocaltea@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Improve clock support for Actions S500 SoC | expand |
On Thu, May 27, 2021 at 04:16:40PM +0300, Cristian Ciocaltea wrote: > Drop the unsupported entries in the factor table used for the SD[0-2] > clocks definitions on the Actions Semi Owl S500 SoC. > > Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Thanks, Mani > --- > Changes in v2: > - Re-added entry "{ 24, 1, 25 }" to sd_factor_table, according to the > datasheet (V1.8+), this is a valid divider > > drivers/clk/actions/owl-s500.c | 6 ++---- > 1 file changed, 2 insertions(+), 4 deletions(-) > > diff --git a/drivers/clk/actions/owl-s500.c b/drivers/clk/actions/owl-s500.c > index 75b7186185b0..42abdf964044 100644 > --- a/drivers/clk/actions/owl-s500.c > +++ b/drivers/clk/actions/owl-s500.c > @@ -127,8 +127,7 @@ static struct clk_factor_table sd_factor_table[] = { > { 12, 1, 13 }, { 13, 1, 14 }, { 14, 1, 15 }, { 15, 1, 16 }, > { 16, 1, 17 }, { 17, 1, 18 }, { 18, 1, 19 }, { 19, 1, 20 }, > { 20, 1, 21 }, { 21, 1, 22 }, { 22, 1, 23 }, { 23, 1, 24 }, > - { 24, 1, 25 }, { 25, 1, 26 }, { 26, 1, 27 }, { 27, 1, 28 }, > - { 28, 1, 29 }, { 29, 1, 30 }, { 30, 1, 31 }, { 31, 1, 32 }, > + { 24, 1, 25 }, > > /* bit8: /128 */ > { 256, 1, 1 * 128 }, { 257, 1, 2 * 128 }, { 258, 1, 3 * 128 }, { 259, 1, 4 * 128 }, > @@ -137,8 +136,7 @@ static struct clk_factor_table sd_factor_table[] = { > { 268, 1, 13 * 128 }, { 269, 1, 14 * 128 }, { 270, 1, 15 * 128 }, { 271, 1, 16 * 128 }, > { 272, 1, 17 * 128 }, { 273, 1, 18 * 128 }, { 274, 1, 19 * 128 }, { 275, 1, 20 * 128 }, > { 276, 1, 21 * 128 }, { 277, 1, 22 * 128 }, { 278, 1, 23 * 128 }, { 279, 1, 24 * 128 }, > - { 280, 1, 25 * 128 }, { 281, 1, 26 * 128 }, { 282, 1, 27 * 128 }, { 283, 1, 28 * 128 }, > - { 284, 1, 29 * 128 }, { 285, 1, 30 * 128 }, { 286, 1, 31 * 128 }, { 287, 1, 32 * 128 }, > + { 280, 1, 25 * 128 }, > { 0, 0, 0 }, > }; > > -- > 2.31.1 >
diff --git a/drivers/clk/actions/owl-s500.c b/drivers/clk/actions/owl-s500.c index 75b7186185b0..42abdf964044 100644 --- a/drivers/clk/actions/owl-s500.c +++ b/drivers/clk/actions/owl-s500.c @@ -127,8 +127,7 @@ static struct clk_factor_table sd_factor_table[] = { { 12, 1, 13 }, { 13, 1, 14 }, { 14, 1, 15 }, { 15, 1, 16 }, { 16, 1, 17 }, { 17, 1, 18 }, { 18, 1, 19 }, { 19, 1, 20 }, { 20, 1, 21 }, { 21, 1, 22 }, { 22, 1, 23 }, { 23, 1, 24 }, - { 24, 1, 25 }, { 25, 1, 26 }, { 26, 1, 27 }, { 27, 1, 28 }, - { 28, 1, 29 }, { 29, 1, 30 }, { 30, 1, 31 }, { 31, 1, 32 }, + { 24, 1, 25 }, /* bit8: /128 */ { 256, 1, 1 * 128 }, { 257, 1, 2 * 128 }, { 258, 1, 3 * 128 }, { 259, 1, 4 * 128 }, @@ -137,8 +136,7 @@ static struct clk_factor_table sd_factor_table[] = { { 268, 1, 13 * 128 }, { 269, 1, 14 * 128 }, { 270, 1, 15 * 128 }, { 271, 1, 16 * 128 }, { 272, 1, 17 * 128 }, { 273, 1, 18 * 128 }, { 274, 1, 19 * 128 }, { 275, 1, 20 * 128 }, { 276, 1, 21 * 128 }, { 277, 1, 22 * 128 }, { 278, 1, 23 * 128 }, { 279, 1, 24 * 128 }, - { 280, 1, 25 * 128 }, { 281, 1, 26 * 128 }, { 282, 1, 27 * 128 }, { 283, 1, 28 * 128 }, - { 284, 1, 29 * 128 }, { 285, 1, 30 * 128 }, { 286, 1, 31 * 128 }, { 287, 1, 32 * 128 }, + { 280, 1, 25 * 128 }, { 0, 0, 0 }, };
Drop the unsupported entries in the factor table used for the SD[0-2] clocks definitions on the Actions Semi Owl S500 SoC. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> --- Changes in v2: - Re-added entry "{ 24, 1, 25 }" to sd_factor_table, according to the datasheet (V1.8+), this is a valid divider drivers/clk/actions/owl-s500.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)