@@ -86,16 +86,6 @@ enum mx25_clks {
static struct clk *clk[clk_max];
-static struct clk ** const uart_clks[] __initconst = {
- &clk[uart_ipg_per],
- &clk[uart1_ipg],
- &clk[uart2_ipg],
- &clk[uart3_ipg],
- &clk[uart4_ipg],
- &clk[uart5_ipg],
- NULL
-};
-
static int __init __mx25_clocks_init(void __iomem *ccm_base)
{
BUG_ON(!ccm_base);
@@ -241,8 +231,6 @@ static int __init __mx25_clocks_init(void __iomem *ccm_base)
*/
clk_set_parent(clk[cko_sel], clk[ipg]);
- imx_register_uart_clocks(uart_clks);
-
return 0;
}
@@ -48,17 +48,6 @@ static const char *ssi_sel_clks[] = { "spll_gate", "mpll", };
static struct clk *clk[IMX27_CLK_MAX];
static struct clk_onecell_data clk_data;
-static struct clk ** const uart_clks[] __initconst = {
- &clk[IMX27_CLK_PER1_GATE],
- &clk[IMX27_CLK_UART1_IPG_GATE],
- &clk[IMX27_CLK_UART2_IPG_GATE],
- &clk[IMX27_CLK_UART3_IPG_GATE],
- &clk[IMX27_CLK_UART4_IPG_GATE],
- &clk[IMX27_CLK_UART5_IPG_GATE],
- &clk[IMX27_CLK_UART6_IPG_GATE],
- NULL
-};
-
static void __init _mx27_clocks_init(unsigned long fref)
{
BUG_ON(!ccm);
@@ -175,8 +164,6 @@ static void __init _mx27_clocks_init(unsigned long fref)
clk_prepare_enable(clk[IMX27_CLK_EMI_AHB_GATE]);
- imx_register_uart_clocks(uart_clks);
-
imx_print_silicon_rev("i.MX27", mx27_revision());
}
@@ -63,16 +63,6 @@ enum mx31_clks {
static struct clk *clk[clk_max];
static struct clk_onecell_data clk_data;
-static struct clk ** const uart_clks[] __initconst = {
- &clk[ipg],
- &clk[uart1_gate],
- &clk[uart2_gate],
- &clk[uart3_gate],
- &clk[uart4_gate],
- &clk[uart5_gate],
- NULL
-};
-
static void __init _mx31_clocks_init(void __iomem *base, unsigned long fref)
{
clk[dummy] = imx_clk_fixed("dummy", 0);
@@ -208,8 +198,6 @@ int __init mx31_clocks_init(unsigned long fref)
clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
clk_register_clkdev(clk[iim_gate], "iim", NULL);
-
- imx_register_uart_clocks(uart_clks);
mxc_timer_init(MX31_GPT1_BASE_ADDR, MX31_INT_GPT, GPT_TYPE_IMX31);
return 0;
@@ -86,14 +86,6 @@ enum mx35_clks {
static struct clk *clk[clk_max];
-static struct clk ** const uart_clks[] __initconst = {
- &clk[ipg],
- &clk[uart1_gate],
- &clk[uart2_gate],
- &clk[uart3_gate],
- NULL
-};
-
static void __init _mx35_clocks_init(void)
{
void __iomem *base;
@@ -247,8 +239,6 @@ static void __init _mx35_clocks_init(void)
*/
clk_prepare_enable(clk[scc_gate]);
- imx_register_uart_clocks(uart_clks);
-
imx_print_silicon_rev("i.MX35", mx35_revision());
}
@@ -131,20 +131,6 @@ static const char *ieee1588_sels[] = { "pll3_sw", "pll4_sw", "dummy" /* usbphy2_
static struct clk *clk[IMX5_CLK_END];
static struct clk_onecell_data clk_data;
-static struct clk ** const uart_clks[] __initconst = {
- &clk[IMX5_CLK_UART1_IPG_GATE],
- &clk[IMX5_CLK_UART1_PER_GATE],
- &clk[IMX5_CLK_UART2_IPG_GATE],
- &clk[IMX5_CLK_UART2_PER_GATE],
- &clk[IMX5_CLK_UART3_IPG_GATE],
- &clk[IMX5_CLK_UART3_PER_GATE],
- &clk[IMX5_CLK_UART4_IPG_GATE],
- &clk[IMX5_CLK_UART4_PER_GATE],
- &clk[IMX5_CLK_UART5_IPG_GATE],
- &clk[IMX5_CLK_UART5_PER_GATE],
- NULL
-};
-
static void __init mx5_clocks_common_init(void __iomem *ccm_base)
{
clk[IMX5_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
@@ -321,8 +307,6 @@ static void __init mx5_clocks_common_init(void __iomem *ccm_base)
clk_prepare_enable(clk[IMX5_CLK_TMAX1]);
clk_prepare_enable(clk[IMX5_CLK_TMAX2]); /* esdhc2, fec */
clk_prepare_enable(clk[IMX5_CLK_TMAX3]); /* esdhc1, esdhc4 */
-
- imx_register_uart_clocks(uart_clks);
}
static void __init mx50_clocks_init(struct device_node *np)
@@ -150,12 +150,6 @@ static inline int clk_on_imx6dl(void)
return of_machine_is_compatible("fsl,imx6dl");
}
-static struct clk ** const uart_clks[] __initconst = {
- &clk[IMX6QDL_CLK_UART_IPG],
- &clk[IMX6QDL_CLK_UART_SERIAL],
- NULL
-};
-
static int ldb_di_sel_by_clock_id(int clock_id)
{
switch (clock_id) {
@@ -918,7 +912,5 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk_set_parent(clk[IMX6QDL_CLK_GPU2D_CORE_SEL],
clk[IMX6QDL_CLK_PLL3_USB_OTG]);
}
-
- imx_register_uart_clocks(uart_clks);
}
CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
@@ -185,12 +185,6 @@ void imx6sl_set_wait_clk(bool enter)
imx6sl_enable_pll_arm(false);
}
-static struct clk ** const uart_clks[] __initconst = {
- &clks[IMX6SL_CLK_UART],
- &clks[IMX6SL_CLK_UART_SERIAL],
- NULL
-};
-
static void __init imx6sl_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
@@ -447,7 +441,5 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
clk_set_parent(clks[IMX6SL_CLK_LCDIF_AXI_SEL],
clks[IMX6SL_CLK_PLL2_PFD2]);
-
- imx_register_uart_clocks(uart_clks);
}
CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
@@ -137,12 +137,6 @@ static u32 share_count_ssi3;
static u32 share_count_sai1;
static u32 share_count_sai2;
-static struct clk ** const uart_clks[] __initconst = {
- &clks[IMX6SX_CLK_UART_IPG],
- &clks[IMX6SX_CLK_UART_SERIAL],
- NULL
-};
-
static void __init imx6sx_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
@@ -566,7 +560,5 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
clk_set_parent(clks[IMX6SX_CLK_QSPI1_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
clk_set_parent(clks[IMX6SX_CLK_QSPI2_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
-
- imx_register_uart_clocks(uart_clks);
}
CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);
@@ -387,17 +387,6 @@ static int const clks_init_on[] __initconst = {
static struct clk_onecell_data clk_data;
-static struct clk ** const uart_clks[] __initconst = {
- &clks[IMX7D_UART1_ROOT_CLK],
- &clks[IMX7D_UART2_ROOT_CLK],
- &clks[IMX7D_UART3_ROOT_CLK],
- &clks[IMX7D_UART4_ROOT_CLK],
- &clks[IMX7D_UART5_ROOT_CLK],
- &clks[IMX7D_UART6_ROOT_CLK],
- &clks[IMX7D_UART7_ROOT_CLK],
- NULL
-};
-
static void __init imx7d_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
@@ -884,8 +873,5 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
/* set uart module clock's parent clock source that must be great then 80MHz */
clk_set_parent(clks[IMX7D_UART1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
-
- imx_register_uart_clocks(uart_clks);
-
}
CLK_OF_DECLARE(imx7d, "fsl,imx7d-ccm", imx7d_clocks_init);
@@ -74,41 +74,3 @@ void imx_cscmr1_fixup(u32 *val)
*val ^= CSCMR1_FIXUP;
return;
}
-
-static int imx_keep_uart_clocks __initdata;
-static struct clk ** const *imx_uart_clocks __initdata;
-
-static int __init imx_keep_uart_clocks_param(char *str)
-{
- imx_keep_uart_clocks = 1;
-
- return 0;
-}
-__setup_param("earlycon", imx_keep_uart_earlycon,
- imx_keep_uart_clocks_param, 0);
-__setup_param("earlyprintk", imx_keep_uart_earlyprintk,
- imx_keep_uart_clocks_param, 0);
-
-void __init imx_register_uart_clocks(struct clk ** const clks[])
-{
- if (imx_keep_uart_clocks) {
- int i;
-
- imx_uart_clocks = clks;
- for (i = 0; imx_uart_clocks[i]; i++)
- clk_prepare_enable(*imx_uart_clocks[i]);
- }
-}
-
-static int __init imx_clk_disable_uart(void)
-{
- if (imx_keep_uart_clocks && imx_uart_clocks) {
- int i;
-
- for (i = 0; imx_uart_clocks[i]; i++)
- clk_disable_unprepare(*imx_uart_clocks[i]);
- }
-
- return 0;
-}
-late_initcall_sync(imx_clk_disable_uart);
@@ -8,7 +8,6 @@
extern spinlock_t imx_ccm_lock;
void imx_check_clocks(struct clk *clks[], unsigned int count);
-void imx_register_uart_clocks(struct clk ** const clks[]);
extern void imx_cscmr1_fixup(u32 *val);
@@ -7,4 +7,12 @@ config IMX7_PM_DOMAINS
select PM_GENERIC_DOMAINS
default y if SOC_IMX7D
+config IMX_BOOT_CONSTRAINT
+ bool "i.MX Boot Constraints"
+ depends on ARCH_MXC
+ select DEV_BOOT_CONSTRAINT
+ default y
+ help
+ Say y here to enable Boot Constraints on i.MX platforms.
+
endmenu
@@ -1,2 +1,3 @@
+obj-$(IMXIG_IMX_BOOT_CONSTRAINT) += boot_constraint.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_IMX7_PM_DOMAINS) += gpcv2.o
new file mode 100644
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This takes care of IMX boot time device constraints, normally set by the
+ * Bootloader.
+ *
+ * Copyright (c) 2018 Linaro.
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ */
+
+#include <linux/boot_constraint.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+
+static bool earlycon_boot_constraints_enabled __initdata;
+
+static int __init enable_earlycon_boot_constraints(char *str)
+{
+ earlycon_boot_constraints_enabled = true;
+
+ return 0;
+}
+
+__setup_param("earlycon", boot_constraint_earlycon,
+ enable_earlycon_boot_constraints, 0);
+__setup_param("earlyprintk", boot_constraint_earlyprintk,
+ enable_earlycon_boot_constraints, 0);
+
+
+struct imx_machine_constraints {
+ struct dev_boot_constraint_of *dev_constraints;
+ unsigned int count;
+};
+
+static struct dev_boot_constraint_clk_info uart_ipg_clk_info = {
+ .name = "ipg",
+};
+
+static struct dev_boot_constraint_clk_info uart_per_clk_info = {
+ .name = "per",
+};
+
+static struct dev_boot_constraint imx_uart_constraints[] = {
+ {
+ .type = DEV_BOOT_CONSTRAINT_CLK,
+ .data = &uart_ipg_clk_info,
+ }, {
+ .type = DEV_BOOT_CONSTRAINT_CLK,
+ .data = &uart_per_clk_info,
+ },
+};
+
+static struct dev_boot_constraint_of imx_dev_constraints[] = {
+ {
+ .compat = "fsl,imx21-uart",
+ .constraints = imx_uart_constraints,
+ .count = ARRAY_SIZE(imx_uart_constraints),
+ },
+};
+
+static struct imx_machine_constraints imx_constraints = {
+ .dev_constraints = imx_dev_constraints,
+ .count = ARRAY_SIZE(imx_dev_constraints),
+};
+
+/* imx7 */
+static struct dev_boot_constraint_of imx7_dev_constraints[] = {
+ {
+ .compat = "fsl,imx6q-uart",
+ .constraints = imx_uart_constraints,
+ .count = ARRAY_SIZE(imx_uart_constraints),
+ },
+};
+
+static struct imx_machine_constraints imx7_constraints = {
+ .dev_constraints = imx7_dev_constraints,
+ .count = ARRAY_SIZE(imx7_dev_constraints),
+};
+
+static const struct of_device_id machines[] __initconst = {
+ { .compatible = "fsl,imx25", .data = &imx_constraints },
+ { .compatible = "fsl,imx27", .data = &imx_constraints },
+ { .compatible = "fsl,imx31", .data = &imx_constraints },
+ { .compatible = "fsl,imx35", .data = &imx_constraints },
+ { .compatible = "fsl,imx50", .data = &imx_constraints },
+ { .compatible = "fsl,imx51", .data = &imx_constraints },
+ { .compatible = "fsl,imx53", .data = &imx_constraints },
+ { .compatible = "fsl,imx6dl", .data = &imx_constraints },
+ { .compatible = "fsl,imx6q", .data = &imx_constraints },
+ { .compatible = "fsl,imx6qp", .data = &imx_constraints },
+ { .compatible = "fsl,imx6sl", .data = &imx_constraints },
+ { .compatible = "fsl,imx6sx", .data = &imx_constraints },
+ { .compatible = "fsl,imx6ul", .data = &imx_constraints },
+ { .compatible = "fsl,imx6ull", .data = &imx_constraints },
+ { .compatible = "fsl,imx7d", .data = &imx7_constraints },
+ { .compatible = "fsl,imx7s", .data = &imx7_constraints },
+ { }
+};
+
+static int __init imx_constraints_init(void)
+{
+ const struct imx_machine_constraints *constraints;
+ const struct of_device_id *match;
+ struct device_node *np;
+
+ if (!earlycon_boot_constraints_enabled)
+ return 0;
+
+ np = of_find_node_by_path("/");
+ if (!np)
+ return -ENODEV;
+
+ match = of_match_node(machines, np);
+ of_node_put(np);
+
+ if (!match)
+ return 0;
+
+ constraints = match->data;
+
+ dev_boot_constraint_add_deferrable_of(constraints->dev_constraints,
+ constraints->count);
+
+ return 0;
+}
+subsys_initcall(imx_constraints_init);
This adds boot constraint support for IMX platforms. Currently only one use case is supported: earlycon. Some of the UARTs are enabled by the bootloader and are used for early console in the kernel. The boot constraint core handles them properly and removes them once the serial device is probed by its driver. This gets rid of lots of hacky code in the clock drivers. Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- drivers/clk/imx/clk-imx25.c | 12 ---- drivers/clk/imx/clk-imx27.c | 13 ---- drivers/clk/imx/clk-imx31.c | 12 ---- drivers/clk/imx/clk-imx35.c | 10 --- drivers/clk/imx/clk-imx51-imx53.c | 16 ----- drivers/clk/imx/clk-imx6q.c | 8 --- drivers/clk/imx/clk-imx6sl.c | 8 --- drivers/clk/imx/clk-imx6sx.c | 8 --- drivers/clk/imx/clk-imx7d.c | 14 ----- drivers/clk/imx/clk.c | 38 ------------ drivers/clk/imx/clk.h | 1 - drivers/soc/imx/Kconfig | 8 +++ drivers/soc/imx/Makefile | 1 + drivers/soc/imx/boot_constraint.c | 126 ++++++++++++++++++++++++++++++++++++++ 14 files changed, 135 insertions(+), 140 deletions(-) create mode 100644 drivers/soc/imx/boot_constraint.c