| Message ID | d4c675190d3ddfbba5c354edb4274757f9117304.1672489554.git.christophe.jaillet@wanadoo.fr (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | watchdog: lpc18xx: Use devm_clk_get_enabled() helper | expand |
On Sat, Dec 31, 2022 at 01:26:09PM +0100, Christophe JAILLET wrote: > The devm_clk_get_enabled() helper: > - calls devm_clk_get() > - calls clk_prepare_enable() and registers what is needed in order to > call clk_disable_unprepare() when needed, as a managed resource. > > This simplifies the code and avoids the need of a dedicated function used > with devm_add_action_or_reset(). > > Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> > --- > Note that the order of operations is slightly modified by this patch. The > "reg" clk is now prepare_enable()'ed before clk_get("wdtclk"). > --- > drivers/watchdog/lpc18xx_wdt.c | 30 ++---------------------------- > 1 file changed, 2 insertions(+), 28 deletions(-) > > diff --git a/drivers/watchdog/lpc18xx_wdt.c b/drivers/watchdog/lpc18xx_wdt.c > index 60b6d74f267d..1b9b5f21a0df 100644 > --- a/drivers/watchdog/lpc18xx_wdt.c > +++ b/drivers/watchdog/lpc18xx_wdt.c > @@ -197,16 +197,10 @@ static const struct watchdog_ops lpc18xx_wdt_ops = { > .restart = lpc18xx_wdt_restart, > }; > > -static void lpc18xx_clk_disable_unprepare(void *data) > -{ > - clk_disable_unprepare(data); > -} > - > static int lpc18xx_wdt_probe(struct platform_device *pdev) > { > struct lpc18xx_wdt_dev *lpc18xx_wdt; > struct device *dev = &pdev->dev; > - int ret; > > lpc18xx_wdt = devm_kzalloc(dev, sizeof(*lpc18xx_wdt), GFP_KERNEL); > if (!lpc18xx_wdt) > @@ -216,38 +210,18 @@ static int lpc18xx_wdt_probe(struct platform_device *pdev) > if (IS_ERR(lpc18xx_wdt->base)) > return PTR_ERR(lpc18xx_wdt->base); > > - lpc18xx_wdt->reg_clk = devm_clk_get(dev, "reg"); > + lpc18xx_wdt->reg_clk = devm_clk_get_enabled(dev, "reg"); > if (IS_ERR(lpc18xx_wdt->reg_clk)) { > dev_err(dev, "failed to get the reg clock\n"); > return PTR_ERR(lpc18xx_wdt->reg_clk); > } > > - lpc18xx_wdt->wdt_clk = devm_clk_get(dev, "wdtclk"); > + lpc18xx_wdt->wdt_clk = devm_clk_get_enabled(dev, "wdtclk"); > if (IS_ERR(lpc18xx_wdt->wdt_clk)) { > dev_err(dev, "failed to get the wdt clock\n"); > return PTR_ERR(lpc18xx_wdt->wdt_clk); > } > > - ret = clk_prepare_enable(lpc18xx_wdt->reg_clk); > - if (ret) { > - dev_err(dev, "could not prepare or enable sys clock\n"); > - return ret; > - } > - ret = devm_add_action_or_reset(dev, lpc18xx_clk_disable_unprepare, > - lpc18xx_wdt->reg_clk); > - if (ret) > - return ret; > - > - ret = clk_prepare_enable(lpc18xx_wdt->wdt_clk); > - if (ret) { > - dev_err(dev, "could not prepare or enable wdt clock\n"); > - return ret; > - } > - ret = devm_add_action_or_reset(dev, lpc18xx_clk_disable_unprepare, > - lpc18xx_wdt->wdt_clk); > - if (ret) > - return ret; > - > /* We use the clock rate to calculate timeouts */ > lpc18xx_wdt->clk_rate = clk_get_rate(lpc18xx_wdt->wdt_clk); > if (lpc18xx_wdt->clk_rate == 0) { > -- > 2.34.1 >
diff --git a/drivers/watchdog/lpc18xx_wdt.c b/drivers/watchdog/lpc18xx_wdt.c index 60b6d74f267d..1b9b5f21a0df 100644 --- a/drivers/watchdog/lpc18xx_wdt.c +++ b/drivers/watchdog/lpc18xx_wdt.c @@ -197,16 +197,10 @@ static const struct watchdog_ops lpc18xx_wdt_ops = { .restart = lpc18xx_wdt_restart, }; -static void lpc18xx_clk_disable_unprepare(void *data) -{ - clk_disable_unprepare(data); -} - static int lpc18xx_wdt_probe(struct platform_device *pdev) { struct lpc18xx_wdt_dev *lpc18xx_wdt; struct device *dev = &pdev->dev; - int ret; lpc18xx_wdt = devm_kzalloc(dev, sizeof(*lpc18xx_wdt), GFP_KERNEL); if (!lpc18xx_wdt) @@ -216,38 +210,18 @@ static int lpc18xx_wdt_probe(struct platform_device *pdev) if (IS_ERR(lpc18xx_wdt->base)) return PTR_ERR(lpc18xx_wdt->base); - lpc18xx_wdt->reg_clk = devm_clk_get(dev, "reg"); + lpc18xx_wdt->reg_clk = devm_clk_get_enabled(dev, "reg"); if (IS_ERR(lpc18xx_wdt->reg_clk)) { dev_err(dev, "failed to get the reg clock\n"); return PTR_ERR(lpc18xx_wdt->reg_clk); } - lpc18xx_wdt->wdt_clk = devm_clk_get(dev, "wdtclk"); + lpc18xx_wdt->wdt_clk = devm_clk_get_enabled(dev, "wdtclk"); if (IS_ERR(lpc18xx_wdt->wdt_clk)) { dev_err(dev, "failed to get the wdt clock\n"); return PTR_ERR(lpc18xx_wdt->wdt_clk); } - ret = clk_prepare_enable(lpc18xx_wdt->reg_clk); - if (ret) { - dev_err(dev, "could not prepare or enable sys clock\n"); - return ret; - } - ret = devm_add_action_or_reset(dev, lpc18xx_clk_disable_unprepare, - lpc18xx_wdt->reg_clk); - if (ret) - return ret; - - ret = clk_prepare_enable(lpc18xx_wdt->wdt_clk); - if (ret) { - dev_err(dev, "could not prepare or enable wdt clock\n"); - return ret; - } - ret = devm_add_action_or_reset(dev, lpc18xx_clk_disable_unprepare, - lpc18xx_wdt->wdt_clk); - if (ret) - return ret; - /* We use the clock rate to calculate timeouts */ lpc18xx_wdt->clk_rate = clk_get_rate(lpc18xx_wdt->wdt_clk); if (lpc18xx_wdt->clk_rate == 0) {
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code and avoids the need of a dedicated function used with devm_add_action_or_reset(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> --- Note that the order of operations is slightly modified by this patch. The "reg" clk is now prepare_enable()'ed before clk_get("wdtclk"). --- drivers/watchdog/lpc18xx_wdt.c | 30 ++---------------------------- 1 file changed, 2 insertions(+), 28 deletions(-)