@@ -64,6 +64,7 @@
marvell,pins = "mpp57";
marvell,function = "gpio";
};
+
sata1_led_pin: sata1-led-pin {
marvell,pins = "mpp15";
marvell,function = "gpio";
@@ -45,34 +45,42 @@
marvell,pins = "mpp47";
marvell,function = "gpio";
};
+
pmx_button_backup: pmx-button-backup {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
+
pmx_button_reset: pmx-button-reset {
marvell,pins = "mpp13";
marvell,function = "gpio";
};
+
pmx_led_blue_power: pmx-led-blue-power {
marvell,pins = "mpp31";
marvell,function = "gpio";
};
+
pmx_led_blue_activity: pmx-led-blue-activity {
marvell,pins = "mpp38";
marvell,function = "gpio";
};
+
pmx_led_blue_disk1: pmx-led-blue-disk1 {
marvell,pins = "mpp23";
marvell,function = "gpio";
};
+
pmx_led_blue_disk2: pmx-led-blue-disk2 {
marvell,pins = "mpp22";
marvell,function = "gpio";
};
+
pmx_led_blue_backup: pmx-led-blue-backup {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
+
pmx_poweroff: pmx-poweroff {
marvell,pins = "mpp30";
marvell,function = "gpio";
@@ -129,18 +137,22 @@
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
+
activity_led {
label = "status:blue:activity_led";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
+
disk1_led {
label = "status:blue:disk1_led";
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
};
+
disk2_led {
label = "status:blue:disk2_led";
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
};
+
backup_led {
label = "status:blue:backup_led";
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
@@ -158,11 +170,13 @@
linux,code = <KEY_POWER>;
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
+
reset-button {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
+
backup-button {
label = "Backup Button";
linux,code = <KEY_COPY>;
@@ -177,23 +191,23 @@
gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB 3.0 Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio1 14 0>;
- };
- };
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3_regulator: usb3-regulator {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB 3.0 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&nand {
This patch provides some whitespace cleanup for NETGEAR ReadyNAS Duo v2 and 102 .dts files: - Fixed bad spaces - Added some space between nodes to improve readability Signed-off-by: Arnaud Ebalard <arno@natisbad.org> --- arch/arm/boot/dts/armada-370-netgear-rn102.dts | 1 + .../boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 48 ++++++++++++++-------- 2 files changed, 32 insertions(+), 17 deletions(-)