diff mbox series

[v2,18/33] arm64: zynqmp: List reset property for ethernet phy

Message ID e153f0cda37a2a6ea1c6e11fb0a4af1d400f29e2.1623684253.git.michal.simek@xilinx.com (mailing list archive)
State New, archived
Headers show
Series arm64: zynqmp: Extend board description | expand

Commit Message

Michal Simek June 14, 2021, 3:25 p.m. UTC 
Add information about reset gpio for ethernet phy in case someone wants to
use it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

Changes in v2: None

 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 1 +
 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 339a12b255c1..5ddcfdf48626 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -204,6 +204,7 @@  phy0: ethernet-phy@21 {
 		ti,tx-internal-delay = <0xa>;
 		ti,fifo-depth = <0x1>;
 		ti,dp83867-rxctrl-strap-quirk;
+		/* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
index d9ad8a4b20d3..f7d718ff116b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
@@ -2,7 +2,7 @@ 
 /*
  * dts file for Xilinx ZynqMP ZCU102 RevB
  *
- * (C) Copyright 2016 - 2018, Xilinx, Inc.
+ * (C) Copyright 2016 - 2021, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -22,6 +22,7 @@  phyc: ethernet-phy@c {
 		ti,tx-internal-delay = <0xa>;
 		ti,fifo-depth = <0x1>;
 		ti,dp83867-rxctrl-strap-quirk;
+		/* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */
 	};
 	/* Cleanup from RevA */
 	/delete-node/ ethernet-phy@21;