@@ -12,6 +12,7 @@
#include "hi3670.dtsi"
#include "hikey970-pinctrl.dtsi"
+#include "hikey970-pmic.dtsi"
/ {
model = "HiKey970";
@@ -39,23 +40,6 @@ memory@0 {
reg = <0x0 0x0 0x0 0x0>;
};
- sd_1v8: regulator-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- sd_3v3: regulator-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
wlan_en: wlan-en-1-8v {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
@@ -402,8 +386,8 @@ &dwmmc1 {
pinctrl-0 = <&sd_pmx_func
&sd_clk_cfg_func
&sd_cfg_func>;
- vmmc-supply = <&sd_3v3>;
- vqmmc-supply = <&sd_1v8>;
+ vmmc-supply = <&ldo16>;
+ vqmmc-supply = <&ldo9>;
status = "okay";
};
new file mode 100644
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hi6421v600 SPMI PMIC used at the HiKey970 Development Board
+ *
+ * Copyright (C) 2020, Huawei Tech. Co., Ltd.
+ */
+
+/ {
+ spmi: spmi@fff24000 {
+ compatible = "hisilicon,spmi-controller";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ status = "ok";
+ reg = <0x0 0xfff24000 0x0 0x1000>;
+ spmi-channel = <2>;
+
+ pmic: pmic@0 {
+ compatible = "hisilicon,hi6421-spmi-pmic";
+ slave_id = <0>;
+ reg = <0 0>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ gpios = <&gpio28 0 0>;
+ irq-num = <16>;
+ irq-array = <2>;
+ irq-mask-addr = <0x202 2>;
+ irq-addr = <0x212 2>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ldo3: ldo3@16 {
+ reg = <0x16>;
+ vsel-reg = <0x51>;
+
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+
+ enable-mask = <0x01>;
+
+ voltage-table = <1500000>, <1550000>,
+ <1600000>, <1650000>,
+ <1700000>, <1725000>,
+ <1750000>, <1775000>,
+ <1800000>, <1825000>,
+ <1850000>, <1875000>,
+ <1900000>, <1925000>,
+ <1950000>, <2000000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+
+ ldo4: ldo4@17 { /* 40 PIN */
+ reg = <0x17>;
+ vsel-reg = <0x52>;
+
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+
+ enable-mask = <0x01>;
+ idle-mode-mask = <0x10>;
+ eco-microamp = <10000>;
+
+ hi6421-vsel = <0x52 0x07>;
+ voltage-table = <1725000>, <1750000>,
+ <1775000>, <1800000>,
+ <1825000>, <1850000>,
+ <1875000>, <1900000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+
+ ldo9: ldo9@1C { /* SDCARD I/O */
+ reg = <0x1C>;
+ vsel-reg = <0x57>;
+
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ enable-mask = <0x01>;
+ idle-mode-mask = <0x10>;
+ eco-microamp = <10000>;
+
+ voltage-table = <1750000>, <1800000>,
+ <1825000>, <2800000>,
+ <2850000>, <2950000>,
+ <3000000>, <3300000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <360>;
+ };
+
+ ldo15: ldo15@21 { /* UFS */
+ reg = <0x21>;
+ vsel-reg = <0x5c>;
+
+ regulator-name = "ldo15";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+
+ enable-mask = <0x01>;
+ idle-mode-mask = <0x10>;
+ eco-microamp = <10000>;
+
+ voltage-table = <1800000>, <1850000>,
+ <2400000>, <2600000>,
+ <2700000>, <2850000>,
+ <2950000>, <3000000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+
+ ldo16: ldo16@22 { /* SD */
+ reg = <0x22>;
+ vsel-reg = <0x5d>;
+
+ regulator-name = "ldo16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+
+ enable-mask = <0x01>;
+ idle-mode-mask = <0x10>;
+ eco-microamp = <10000>;
+
+ voltage-table = <1800000>, <1850000>,
+ <2400000>, <2600000>,
+ <2700000>, <2850000>,
+ <2950000>, <3000000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <360>;
+ };
+
+ ldo17: ldo17@23 {
+ reg = <0x23>;
+ vsel-reg = <0x5e>;
+
+ regulator-name = "ldo17";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+
+ enable-mask = <0x01>;
+ idle-mode-mask = <0x10>;
+ eco-microamp = <10000>;
+
+ voltage-table = <2500000>, <2600000>,
+ <2700000>, <2800000>,
+ <3000000>, <3100000>,
+ <3200000>, <3300000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+
+ ldo33: ldo33@32 { /* PEX8606 */
+ reg = <0x32>;
+ vsel-reg = <0x6d>;
+ regulator-name = "ldo33";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ enable-mask = <0x01>;
+
+ voltage-table = <2500000>, <2600000>,
+ <2700000>, <2800000>,
+ <3000000>, <3100000>,
+ <3200000>, <3300000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+
+ ldo34: ldo34@33 { /* GPS AUX IN VDD */
+ reg = <0x33>;
+ vsel-reg = <0x6e>;
+
+ regulator-name = "ldo34";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+
+ enable-mask = <0x01>;
+
+ voltage-table = <2600000>, <2700000>,
+ <2800000>, <2900000>,
+ <3000000>, <3100000>,
+ <3200000>, <3300000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+ };
+ };
+ };
+};
Add a device tree for the HiSilicon 6421v600 SPMI PMIC, used on HiKey970 board. As we now have support for it, change the fixed regulators used by the SD I/O to use the proper LDO supplies. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- .../boot/dts/hisilicon/hi3670-hikey970.dts | 22 +- .../boot/dts/hisilicon/hikey970-pmic.dtsi | 200 ++++++++++++++++++ 2 files changed, 203 insertions(+), 19 deletions(-) create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi