diff mbox series

[v1,22/22] admin-guide: add kdump documentation into it

Message ID e6a805d5b36d4dda2a474db4f9e7e86da710a9be.1560891322.git.mchehab+samsung@kernel.org (mailing list archive)
State New, archived
Headers show
Series None | expand

Commit Message

Mauro Carvalho Chehab June 18, 2019, 9:05 p.m. UTC
The Kdump documentation describes procedures with admins use
in order to solve issues on their systems.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/admin-guide/bug-hunting.rst            | 4 ++--
 Documentation/admin-guide/index.rst                  | 1 +
 Documentation/{ => admin-guide}/kdump/gdbmacros.txt  | 0
 Documentation/{ => admin-guide}/kdump/index.rst      | 1 -
 Documentation/{ => admin-guide}/kdump/kdump.rst      | 0
 Documentation/{ => admin-guide}/kdump/vmcoreinfo.rst | 0
 Documentation/admin-guide/kernel-parameters.txt      | 6 +++---
 Documentation/powerpc/firmware-assisted-dump.rst     | 2 +-
 Documentation/translations/zh_CN/oops-tracing.txt    | 4 ++--
 Documentation/watchdog/hpwdt.rst                     | 2 +-
 MAINTAINERS                                          | 2 +-
 arch/arm/Kconfig                                     | 2 +-
 arch/arm64/Kconfig                                   | 2 +-
 arch/sh/Kconfig                                      | 2 +-
 arch/x86/Kconfig                                     | 4 ++--
 15 files changed, 16 insertions(+), 16 deletions(-)
 rename Documentation/{ => admin-guide}/kdump/gdbmacros.txt (100%)
 rename Documentation/{ => admin-guide}/kdump/index.rst (97%)
 rename Documentation/{ => admin-guide}/kdump/kdump.rst (100%)
 rename Documentation/{ => admin-guide}/kdump/vmcoreinfo.rst (100%)
diff mbox series

Patch

diff --git a/Documentation/admin-guide/bug-hunting.rst b/Documentation/admin-guide/bug-hunting.rst
index b761aa2a51d2..44b8a4edd348 100644
--- a/Documentation/admin-guide/bug-hunting.rst
+++ b/Documentation/admin-guide/bug-hunting.rst
@@ -90,9 +90,9 @@  the disk is not available then you have three options:
     run a null modem to a second machine and capture the output there
     using your favourite communication program.  Minicom works well.
 
-(3) Use Kdump (see Documentation/kdump/kdump.rst),
+(3) Use Kdump (see Documentation/admin-guide/kdump/kdump.rst),
     extract the kernel ring buffer from old memory with using dmesg
-    gdbmacro in Documentation/kdump/gdbmacros.txt.
+    gdbmacro in Documentation/admin-guide/kdump/gdbmacros.txt.
 
 Finding the bug's location
 --------------------------
diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
index e4f0cb2a02bd..9f6820a7e8f8 100644
--- a/Documentation/admin-guide/index.rst
+++ b/Documentation/admin-guide/index.rst
@@ -39,6 +39,7 @@  problems and bugs in particular.
    ramoops
    dynamic-debug-howto
    init
+   kdump/index
 
 This is the beginning of a section with information of interest to
 application developers.  Documents covering various aspects of the kernel
diff --git a/Documentation/kdump/gdbmacros.txt b/Documentation/admin-guide/kdump/gdbmacros.txt
similarity index 100%
rename from Documentation/kdump/gdbmacros.txt
rename to Documentation/admin-guide/kdump/gdbmacros.txt
diff --git a/Documentation/kdump/index.rst b/Documentation/admin-guide/kdump/index.rst
similarity index 97%
rename from Documentation/kdump/index.rst
rename to Documentation/admin-guide/kdump/index.rst
index 2b17fcf6867a..8e2ebd0383cd 100644
--- a/Documentation/kdump/index.rst
+++ b/Documentation/admin-guide/kdump/index.rst
@@ -1,4 +1,3 @@ 
-:orphan:
 
 ================================================================
 Documentation for Kdump - The kexec-based Crash Dumping Solution
diff --git a/Documentation/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
similarity index 100%
rename from Documentation/kdump/kdump.rst
rename to Documentation/admin-guide/kdump/kdump.rst
diff --git a/Documentation/kdump/vmcoreinfo.rst b/Documentation/admin-guide/kdump/vmcoreinfo.rst
similarity index 100%
rename from Documentation/kdump/vmcoreinfo.rst
rename to Documentation/admin-guide/kdump/vmcoreinfo.rst
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 69a9e2e66dfb..1f3fc445c78d 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -708,14 +708,14 @@ 
 			[KNL, x86_64] select a region under 4G first, and
 			fall back to reserve region above 4G when '@offset'
 			hasn't been specified.
-			See Documentation/kdump/kdump.rst for further details.
+			See Documentation/admin-guide/kdump/kdump.rst for further details.
 
 	crashkernel=range1:size1[,range2:size2,...][@offset]
 			[KNL] Same as above, but depends on the memory
 			in the running system. The syntax of range is
 			start-[end] where start and end are both
 			a memory unit (amount[KMG]). See also
-			Documentation/kdump/kdump.rst for an example.
+			Documentation/admin-guide/kdump/kdump.rst for an example.
 
 	crashkernel=size[KMG],high
 			[KNL, x86_64] range could be above 4G. Allow kernel
@@ -1207,7 +1207,7 @@ 
 			Specifies physical address of start of kernel core
 			image elf header and optionally the size. Generally
 			kexec loader will pass this option to capture kernel.
-			See Documentation/kdump/kdump.rst for details.
+			See Documentation/admin-guide/kdump/kdump.rst for details.
 
 	enable_mtrr_cleanup [X86]
 			The kernel tries to adjust MTRR layout from continuous
diff --git a/Documentation/powerpc/firmware-assisted-dump.rst b/Documentation/powerpc/firmware-assisted-dump.rst
index d7fa7c35dd12..9ca12830a48e 100644
--- a/Documentation/powerpc/firmware-assisted-dump.rst
+++ b/Documentation/powerpc/firmware-assisted-dump.rst
@@ -61,7 +61,7 @@  as follows:
          the default calculated size. Use this option if default
          boot memory size is not sufficient for second kernel to
          boot successfully. For syntax of crashkernel= parameter,
-         refer to Documentation/kdump/kdump.rst. If any offset is
+         refer to Documentation/admin-guide/kdump/kdump.rst. If any offset is
          provided in crashkernel= parameter, it will be ignored
          as fadump uses a predefined offset to reserve memory
          for boot memory dump preservation in case of a crash.
diff --git a/Documentation/translations/zh_CN/oops-tracing.txt b/Documentation/translations/zh_CN/oops-tracing.txt
index 368ddd05b304..c5f3bda7abcb 100644
--- a/Documentation/translations/zh_CN/oops-tracing.txt
+++ b/Documentation/translations/zh_CN/oops-tracing.txt
@@ -53,8 +53,8 @@  cat /proc/kmsg > file, 然而你必须介入中止传输, kmsg是一个“
 (2)用串口终端启动(请参看Documentation/admin-guide/serial-console.rst),运行一个null
 modem到另一台机器并用你喜欢的通讯工具获取输出。Minicom工作地很好。
 
-(3)使用Kdump(请参看Documentation/kdump/kdump.rst),
-使用在Documentation/kdump/gdbmacros.txt中定义的dmesg gdb宏,从旧的内存中提取内核
+(3)使用Kdump(请参看Documentation/admin-guide/kdump/kdump.rst),
+使用在Documentation/admin-guide/kdump/gdbmacros.txt中定义的dmesg gdb宏,从旧的内存中提取内核
 环形缓冲区。
 
 完整信息
diff --git a/Documentation/watchdog/hpwdt.rst b/Documentation/watchdog/hpwdt.rst
index 437456bd91a4..9a75720dd51a 100644
--- a/Documentation/watchdog/hpwdt.rst
+++ b/Documentation/watchdog/hpwdt.rst
@@ -59,7 +59,7 @@  Last reviewed: 08/20/2018
  and loop forever.  This is generally not what a watchdog user wants.
 
  For those wishing to learn more please see:
-	Documentation/kdump/kdump.rst
+	Documentation/admin-guide/kdump/kdump.rst
 	Documentation/admin-guide/kernel-parameters.txt (panic=)
 	Your Linux Distribution specific documentation.
 
diff --git a/MAINTAINERS b/MAINTAINERS
index ab170522ec55..071b9e5a1664 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8571,7 +8571,7 @@  R:	Vivek Goyal <vgoyal@redhat.com>
 L:	kexec@lists.infradead.org
 W:	http://lse.sourceforge.net/kdump/
 S:	Maintained
-F:	Documentation/kdump/
+F:	Documentation/admin-guide/kdump/
 
 KEENE FM RADIO TRANSMITTER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ff0e247573d8..fc495004f148 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2009,7 +2009,7 @@  config CRASH_DUMP
 	  kdump/kexec. The crash dump kernel must be compiled to a
 	  memory address not used by the main kernel
 
-	  For more details see Documentation/kdump/kdump.rst
+	  For more details see Documentation/admin-guide/kdump/kdump.rst
 
 config AUTO_ZRELADDR
 	bool "Auto calculation of the decompressed kernel image address"
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index a8a5fe91c579..9c2275b22904 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -995,7 +995,7 @@  config CRASH_DUMP
 	  reserved region and then later executed after a crash by
 	  kdump/kexec.
 
-	  For more details see Documentation/kdump/kdump.rst
+	  For more details see Documentation/admin-guide/kdump/kdump.rst
 
 config XEN_DOM0
 	def_bool y
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 7440639510a0..b731d22c5b9d 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -624,7 +624,7 @@  config CRASH_DUMP
 	  to a memory address not used by the main kernel using
 	  PHYSICAL_START.
 
-	  For more details see Documentation/kdump/kdump.rst
+	  For more details see Documentation/admin-guide/kdump/kdump.rst
 
 config KEXEC_JUMP
 	bool "kexec jump (EXPERIMENTAL)"
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 586dd3529d14..8ed2e47ef4ba 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2052,7 +2052,7 @@  config CRASH_DUMP
 	  to a memory address not used by the main kernel or BIOS using
 	  PHYSICAL_START, or it must be built as a relocatable image
 	  (CONFIG_RELOCATABLE=y).
-	  For more details see Documentation/kdump/kdump.rst
+	  For more details see Documentation/admin-guide/kdump/kdump.rst
 
 config KEXEC_JUMP
 	bool "kexec jump"
@@ -2089,7 +2089,7 @@  config PHYSICAL_START
 	  the reserved region.  In other words, it can be set based on
 	  the "X" value as specified in the "crashkernel=YM@XM"
 	  command line boot parameter passed to the panic-ed
-	  kernel. Please take a look at Documentation/kdump/kdump.rst
+	  kernel. Please take a look at Documentation/admin-guide/kdump/kdump.rst
 	  for more details about crash dumps.
 
 	  Usage of bzImage for capturing the crash dump is recommended as