| Message ID | e71b755467ce9a1f8bf78e2b6cd2e1b63e8338cd.1512628593.git.sean.wang@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 12/07/2017 07:43 AM, sean.wang@mediatek.com wrote: > From: Sean Wang <sean.wang@mediatek.com> > > Fix that bananapi-r2 booting from SD-card would fail since incorrect > polarity is applied to the previous setup with GPIO_ACTIVE_HIGH. > > Cc: stable@vger.kernel.org > Fixes: 0eed8d097612 ("arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2") > Signed-off-by: Sean Wang <sean.wang@mediatek.com> > Tested-by: Matthias Brugger <matthias.bgg@gmail.com> > --- > arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts > index 688a863..7bf5aa2 100644 > --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts > +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts > @@ -204,7 +204,7 @@ > bus-width = <4>; > max-frequency = <50000000>; > cap-sd-highspeed; > - cd-gpios = <&pio 261 0>; > + cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>; > vmmc-supply = <&mt6323_vmch_reg>; > vqmmc-supply = <&mt6323_vio18_reg>; > }; > 2 and 3 pushed to v4.15-next/dts32 Thanks!
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 688a863..7bf5aa2 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -204,7 +204,7 @@ bus-width = <4>; max-frequency = <50000000>; cap-sd-highspeed; - cd-gpios = <&pio 261 0>; + cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>; vmmc-supply = <&mt6323_vmch_reg>; vqmmc-supply = <&mt6323_vio18_reg>; };