@@ -81,3 +81,26 @@
&pcie0 {
status = "okay";
};
+
+&mdio {
+ status = "okay";
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+ð0 {
+ phy-mode = "rgmii-id";
+ phy = <&phy0>;
+ status = "okay";
+};
+
+ð1 {
+ phy-mode = "sgmii";
+ phy = <&phy1>;
+ status = "okay";
+};
@@ -140,6 +140,29 @@
};
};
+ eth0: ethernet@30000 {
+ compatible = "marvell,armada-3700-neta";
+ reg = <0x30000 0x4000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sb_periph_clk 8>;
+ status = "disabled";
+ };
+
+ mdio: mdio@32004 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x32004 0x4>;
+ };
+
+ eth1: ethernet@40000 {
+ compatible = "marvell,armada-3700-neta";
+ reg = <0x40000 0x4000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sb_periph_clk 7>;
+ status = "disabled";
+ };
+
usb3: usb@58000 {
compatible = "marvell,armada3700-xhci",
"generic-xhci";
Add neta nodes for network support both in device tree for the SoC and the board. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> --- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 23 +++++++++++++++++++- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 23 +++++++++++++++++++- 2 files changed, 46 insertions(+), 0 deletions(-)