diff mbox series

[5/6] ARM: dts: bcm21664-garnet: use node labels

Message ID e9f1ac2e9aa0ef7e880b1c152cbd56ff6b151955.1685127525.git.stano.jakubek@gmail.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: bcm-mobile: DT cleanup | expand

Commit Message

Stanislav Jakubek May 26, 2023, 7:30 p.m. UTC 
Use node labels instead of nodename@address for BCM21664 Garnet
to simplify its DTS file.

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
---
 arch/arm/boot/dts/bcm21664-garnet.dts | 46 +++++++++++++--------------
 1 file changed, 23 insertions(+), 23 deletions(-)

Comments

Florian Fainelli June 8, 2023, 10:10 p.m. UTC | #1 
From: Florian Fainelli <f.fainelli@gmail.com>

On Fri, 26 May 2023 21:30:30 +0200, Stanislav Jakubek <stano.jakubek@gmail.com> wrote:
> Use node labels instead of nodename@address for BCM21664 Garnet
> to simplify its DTS file.
> 
> Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
index dead91d97b63..8789fae178bf 100644
--- a/arch/arm/boot/dts/bcm21664-garnet.dts
+++ b/arch/arm/boot/dts/bcm21664-garnet.dts
@@ -15,33 +15,33 @@  memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
+};
 
-	serial@3e000000 {
-		status = "okay";
-	};
+&sdio1 {
+	max-frequency = <48000000>;
+	status = "okay";
+};
 
-	sdio1: mmc@3f180000 {
-		max-frequency = <48000000>;
-		status = "okay";
-	};
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	status = "okay";
+};
 
-	sdio2: mmc@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		status = "okay";
-	};
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
 
-	sdio4: mmc@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
-		status = "okay";
-	};
+&uartb {
+	status = "okay";
+};
 
-	usbotg: usb@3f120000 {
-		status = "okay";
-	};
+&usbotg {
+	status = "okay";
+};
 
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
+&usbphy {
+	status = "okay";
 };