| Message ID | f049c5121edab27227337ccd607db4f38f8d76f3.1519398009.git.michal.simek@xilinx.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Feb 23, 2018 at 04:00:20PM +0100, Michal Simek wrote: > zc770 is based board which is extended by FMC/DC cards for SoC > validation. FMCs/DCs are supposed to cover all SoC configurations. > FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb. > > Signed-off-by: Michal Simek <michal.simek@xilinx.com> > --- > > Changes in v2: > - Record compatible string to xilinx.txt > > Documentation/devicetree/bindings/arm/xilinx.txt | 3 + > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/zynq-zc770-xm010.dts | 92 ++++++++++++++++++++++++ > 3 files changed, 96 insertions(+) > create mode 100644 arch/arm/boot/dts/zynq-zc770-xm010.dts > > diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt > index 425c74fcc560..019e69037d42 100644 > --- a/Documentation/devicetree/bindings/arm/xilinx.txt > +++ b/Documentation/devicetree/bindings/arm/xilinx.txt > @@ -11,6 +11,9 @@ Additional compatible strings: > - Xilinx internal board cc108 > "xlnx,zynq-cc108" > > +- Xilinx internal board zc770 with different FMC cards > + "xlnx,zynq-zc770-xm010" > + > --------------------------------------------------------------- > > Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index c6810e84d4d7..be9ffae2a1ec 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -1067,6 +1067,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ > zynq-parallella.dtb \ > zynq-zc702.dtb \ > zynq-zc706.dtb \ > + zynq-zc770-xm010.dtb \ > zynq-zed.dtb \ > zynq-zybo.dtb > dtb-$(CONFIG_MACH_ARMADA_370) += \ > diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts > new file mode 100644 > index 000000000000..b1cfb4ede434 > --- /dev/null > +++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts > @@ -0,0 +1,92 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Xilinx ZC770 XM010 board DTS > + * > + * Copyright (C) 2013-2018 Xilinx, Inc. > + */ > +/dts-v1/; > +#include "zynq-7000.dtsi" > + > +/ { > + compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000"; > + model = "Xilinx Zynq"; > + > + aliases { > + ethernet0 = &gem0; > + i2c0 = &i2c0; > + serial0 = &uart1; > + spi1 = &spi1; > + }; > + > + chosen { > + bootargs = ""; > + stdout-path = "serial0:115200n8"; > + }; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x40000000>; > + }; > + > + usb_phy0: phy0 { > + compatible = "usb-nop-xceiv"; > + #phy-cells = <0>; > + }; > +}; > + > +&can0 { > + status = "okay"; > +}; > + > +&gem0 { > + status = "okay"; > + phy-mode = "rgmii-id"; > + phy-handle = <ðernet_phy>; > + > + ethernet_phy: ethernet-phy@7 { > + reg = <7>; > + device_type = "ethernet-phy"; > + }; > +}; > + > +&i2c0 { > + status = "okay"; > + clock-frequency = <400000>; > + > + eeprom: eeprom@52 { > + compatible = "atmel,24c02"; > + reg = <0x52>; > + }; > + > +}; > + > +&sdhci0 { > + status = "okay"; > +}; > + > +&spi1 { > + status = "okay"; > + num-cs = <4>; > + is-decoded-cs = <0>; > + flash@0 { > + compatible = "sst25wf080", "jedec,spi-nor"; > + reg = <1>; > + spi-max-frequency = <1000000>; > + #address-cells = <1>; > + #size-cells = <1>; > + partition@test { @test? Use a partitions node too. > + label = "spi-flash"; Should be what the partition contains. > + reg = <0x0 0x100000>; > + }; > + }; > +}; > + > +&uart1 { > + status = "okay"; > +}; > + > +&usb0 { > + status = "okay"; > + dr_mode = "host"; > + usb-phy = <&usb_phy0>; > +}; > -- > 1.9.1 >
On 2.3.2018 19:50, Rob Herring wrote: > On Fri, Feb 23, 2018 at 04:00:20PM +0100, Michal Simek wrote: >> zc770 is based board which is extended by FMC/DC cards for SoC >> validation. FMCs/DCs are supposed to cover all SoC configurations. >> FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb. >> >> Signed-off-by: Michal Simek <michal.simek@xilinx.com> >> --- >> >> Changes in v2: >> - Record compatible string to xilinx.txt >> >> Documentation/devicetree/bindings/arm/xilinx.txt | 3 + >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/zynq-zc770-xm010.dts | 92 ++++++++++++++++++++++++ >> 3 files changed, 96 insertions(+) >> create mode 100644 arch/arm/boot/dts/zynq-zc770-xm010.dts >> >> diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt >> index 425c74fcc560..019e69037d42 100644 >> --- a/Documentation/devicetree/bindings/arm/xilinx.txt >> +++ b/Documentation/devicetree/bindings/arm/xilinx.txt >> @@ -11,6 +11,9 @@ Additional compatible strings: >> - Xilinx internal board cc108 >> "xlnx,zynq-cc108" >> >> +- Xilinx internal board zc770 with different FMC cards >> + "xlnx,zynq-zc770-xm010" >> + >> --------------------------------------------------------------- >> >> Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index c6810e84d4d7..be9ffae2a1ec 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -1067,6 +1067,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ >> zynq-parallella.dtb \ >> zynq-zc702.dtb \ >> zynq-zc706.dtb \ >> + zynq-zc770-xm010.dtb \ >> zynq-zed.dtb \ >> zynq-zybo.dtb >> dtb-$(CONFIG_MACH_ARMADA_370) += \ >> diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts >> new file mode 100644 >> index 000000000000..b1cfb4ede434 >> --- /dev/null >> +++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts >> @@ -0,0 +1,92 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * Xilinx ZC770 XM010 board DTS >> + * >> + * Copyright (C) 2013-2018 Xilinx, Inc. >> + */ >> +/dts-v1/; >> +#include "zynq-7000.dtsi" >> + >> +/ { >> + compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000"; >> + model = "Xilinx Zynq"; >> + >> + aliases { >> + ethernet0 = &gem0; >> + i2c0 = &i2c0; >> + serial0 = &uart1; >> + spi1 = &spi1; >> + }; >> + >> + chosen { >> + bootargs = ""; >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> + memory@0 { >> + device_type = "memory"; >> + reg = <0x0 0x40000000>; >> + }; >> + >> + usb_phy0: phy0 { >> + compatible = "usb-nop-xceiv"; >> + #phy-cells = <0>; >> + }; >> +}; >> + >> +&can0 { >> + status = "okay"; >> +}; >> + >> +&gem0 { >> + status = "okay"; >> + phy-mode = "rgmii-id"; >> + phy-handle = <ðernet_phy>; >> + >> + ethernet_phy: ethernet-phy@7 { >> + reg = <7>; >> + device_type = "ethernet-phy"; >> + }; >> +}; >> + >> +&i2c0 { >> + status = "okay"; >> + clock-frequency = <400000>; >> + >> + eeprom: eeprom@52 { >> + compatible = "atmel,24c02"; >> + reg = <0x52>; >> + }; >> + >> +}; >> + >> +&sdhci0 { >> + status = "okay"; >> +}; >> + >> +&spi1 { >> + status = "okay"; >> + num-cs = <4>; >> + is-decoded-cs = <0>; >> + flash@0 { >> + compatible = "sst25wf080", "jedec,spi-nor"; >> + reg = <1>; >> + spi-max-frequency = <1000000>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + partition@test { > > @test? > > Use a partitions node too. ok done. > >> + label = "spi-flash"; > > Should be what the partition contains. I have fixed this to data. Thanks, M
diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index 425c74fcc560..019e69037d42 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -11,6 +11,9 @@ Additional compatible strings: - Xilinx internal board cc108 "xlnx,zynq-cc108" +- Xilinx internal board zc770 with different FMC cards + "xlnx,zynq-zc770-xm010" + --------------------------------------------------------------- Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c6810e84d4d7..be9ffae2a1ec 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1067,6 +1067,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-parallella.dtb \ zynq-zc702.dtb \ zynq-zc706.dtb \ + zynq-zc770-xm010.dtb \ zynq-zed.dtb \ zynq-zybo.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts new file mode 100644 index 000000000000..b1cfb4ede434 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts @@ -0,0 +1,92 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx ZC770 XM010 board DTS + * + * Copyright (C) 2013-2018 Xilinx, Inc. + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + + aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; + serial0 = &uart1; + spi1 = &spi1; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&can0 { + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + device_type = "ethernet-phy"; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + eeprom: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + }; + +}; + +&sdhci0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; + flash@0 { + compatible = "sst25wf080", "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@test { + label = "spi-flash"; + reg = <0x0 0x100000>; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; +};
zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Changes in v2: - Record compatible string to xilinx.txt Documentation/devicetree/bindings/arm/xilinx.txt | 3 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/zynq-zc770-xm010.dts | 92 ++++++++++++++++++++++++ 3 files changed, 96 insertions(+) create mode 100644 arch/arm/boot/dts/zynq-zc770-xm010.dts