diff mbox series

[v1,22/49] ARM: dts: imx6qdl-nit6xlite: Use #pwm-cells = <3> for imx27-pwm device

Message ID f974f05e63fd9f7d01249e1606a71a3585e1352d.1712352665.git.u.kleine-koenig@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series ARM: dts: imx: Use #pwm-cells = <3> for imx27-pwm device | expand

Commit Message

Uwe Kleine-König April 5, 2024, 9:42 p.m. UTC 
The binding dictates using 3 pwm-cells. Adhere to that.

This fixes the following dtbs_check warnings:

	arch/arm/boot/dts/nxp/imx/imx6dl-nit6xlite.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6dl-nit6xlite.dtb: pwm@208c000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
index f2542d725ce7..a30cf0d06206 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
@@ -108,7 +108,7 @@  led-j46-pin3 {
 
 	backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -117,7 +117,7 @@  backlight-lcd {
 
 	backlight_lvds0: backlight-lvds0 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -499,7 +499,6 @@  &pcie {
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -512,7 +511,6 @@  &pwm3 {
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";