[v5,0/7] Add RSC power domain support

Message

Maulik Shah Feb. 19, 2020, 10:40 a.m. UTC

Changes in v5:
- Add Rob's Acked by on dt-bindings change
- Drop firmware psci change
- Update cpuidle stats in dtsi to follow PC mode
- Include change to update dirty flag when data is updated from [4]
- Add change to invoke rpmh_flush when caches are dirty

Changes in v4:
- Add change to allow hierarchical topology in PC mode
- Drop hierarchical domain idle states converter from v3
- Address Merge sc7180 dtsi change to add low power modes

Changes in v3:
- Address Rob's comment on dt property value
- Address Stephen's comments on rpmh-rsc driver change
- Include sc7180 cpuidle low power mode changes from [1]
- Include hierarchical domain idle states converter change from [2]

Changes in v2:
- Add Stephen's Reviewed-By to the first three patches
- Addressed Stephen's comments on fourth patch
- Include changes to connect rpmh domain to cpuidle and genpds

Resource State Coordinator (RSC) is responsible for powering off/lowering
the requirements from CPU subsystem for the associated hardware like buses,
clocks, and regulators when all CPUs and cluster is powered down.

RSC power domain uses last-man activities provided by genpd framework based
on Ulf Hansoon's patch series[3], when the cluster of CPUs enter deepest
idle states. As a part of domain poweroff, RSC can lower resource state
requirements by flushing the cached sleep and wake state votes for various
resources.

[1] https://patchwork.kernel.org/patch/11218965
[2] https://patchwork.kernel.org/patch/10941671
[3] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=222355
[4] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=236503

Maulik Shah (7):
  drivers: qcom: rpmh: fix macro to accept NULL argument
  drivers: qcom: rpmh: remove rpmh_flush export
  dt-bindings: soc: qcom: Add RSC power domain specifier
  drivers: qcom: rpmh-rsc: Add RSC power domain support
  arm64: dts: qcom: sc7180: Add cpuidle low power states
  soc: qcom: rpmh: Update dirty flag only when data changes
  soc: qcom: rpmh: Invoke rpmh_flush for dirty caches

 .../devicetree/bindings/soc/qcom/rpmh-rsc.txt      |  9 +++
 arch/arm64/boot/dts/qcom/sc7180.dtsi               | 78 +++++++++++++++++++++
 drivers/soc/qcom/rpmh-internal.h                   |  3 +
 drivers/soc/qcom/rpmh-rsc.c                        | 81 ++++++++++++++++++++++
 drivers/soc/qcom/rpmh.c                            | 49 ++++++++-----
 include/soc/qcom/rpmh.h                            |  5 --
 6 files changed, 203 insertions(+), 22 deletions(-)