mbox series

[V3,0/4] Add support for WLED5

Message ID 1583760362-26978-1-git-send-email-kgunda@codeaurora.org (mailing list archive)
Headers show
Series Add support for WLED5 | expand

Message

Kiran Gunda March 9, 2020, 1:25 p.m. UTC 
Currently, WLED driver supports only WLED4 peripherals that is present
on pmi8998 and pm660L. This patch series  converts the existing WLED4
bindings from .txt to .yaml format and adds the support for WLED5 peripheral
that is present on PM8150L.

PM8150L WLED supports the following.
    - Two modulators and each sink can use any of the modulator
    - Multiple CABC selection options
    - Multiple brightness width selection (12 bits to 15 bits)

Changes from V1:
	- Rebased on top of the below commit.
	  backlight: qcom-wled: Fix unsigned comparison to zero

Changes from V2:
	- Addressed Bjorn's comments by splitting the WLED4 changes
	  in a seperate patch.
	- Added WLED5 auto calibration support

Kiran Gunda (4):
  backlight: qcom-wled: convert the wled bindings to .yaml format
  backlight: qcom-wled: Add callbacks functions
  backlight: qcom-wled: Add support for WLED5 peripheral in PM8150L
  backlight: qcom-wled: Update auto calibration support for WLED5

 .../bindings/leds/backlight/qcom-wled.txt          | 154 -----
 .../bindings/leds/backlight/qcom-wled.yaml         | 223 ++++++++
 drivers/video/backlight/qcom-wled.c                | 622 ++++++++++++++++++---
 3 files changed, 772 insertions(+), 227 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml