mbox series

[v1,00/10] Bug fixes and improvements for MHI power operations

Message ID 1600480955-16827-1-git-send-email-bbhatt@codeaurora.org (mailing list archive)
Headers show
Series Bug fixes and improvements for MHI power operations | expand

Message

Bhaumik Bhatt Sept. 19, 2020, 2:02 a.m. UTC
Bug fixes and improvements for MHI powerup and shutdown handling.
Firmware load function names are updated to accurately reflect their purpose.
Closed certain design gaps where the host (MHI bus) would allow clients to
operate after a power down or error detection.
Move to an error state sooner based on different scenarios.

These patches were tested on arm64 and X86_64 architectures.

Bhaumik Bhatt (10):
  bus: mhi: core: Use appropriate names for firmware load functions
  bus: mhi: core: Move to using high priority workqueue
  bus: mhi: core: Skip device wake in error or shutdown states
  bus: mhi: core: Use the IRQF_ONESHOT flag for the BHI interrupt line
  bus: mhi: core: Disable IRQs when powering down
  bus: mhi: core: Improve shutdown handling after link down detection
  bus: mhi: core: Move to SYS_ERROR regardless of RDDM capability
  bus: mhi: core: Move to an error state on any firmware load failure
  bus: mhi: core: Move to an error state on mission mode failure
  bus: mhi: core: Mark device inactive soon after host issues a shutdown

 drivers/bus/mhi/core/boot.c     | 59 ++++++++++++++++++++++-----------------
 drivers/bus/mhi/core/init.c     | 10 ++++++-
 drivers/bus/mhi/core/internal.h |  1 +
 drivers/bus/mhi/core/main.c     | 28 +++++++++++++------
 drivers/bus/mhi/core/pm.c       | 62 ++++++++++++++++++++++++++++-------------
 include/linux/mhi.h             |  2 ++
 6 files changed, 108 insertions(+), 54 deletions(-)