mbox series

[v3,0/4] arm64: dts: qcom: Add support for the sc7280 CRD board

Message ID 1638353502-23640-1-git-send-email-quic_rjendra@quicinc.com (mailing list archive)
Headers show
Series arm64: dts: qcom: Add support for the sc7280 CRD board | expand

Message

Rajendra Nayak Dec. 1, 2021, 10:11 a.m. UTC 
Add support for sc7280 CRD (Compute Reference Design) Board.
It shares the same EC and H1 as the IDP2 boards, comes with an eDP
display and supports both touch and trackpad.
Since the EC and H1 nodes are identical across CRD and IDP2 this
series also adds support for EC/H1 on IDP2 devices.

Kshitiz Godara (2):
  arm64: dts: qcom: sc7280: Define EC and H1 nodes for IDP/CRD
  arm64: dts: qcom: sc7280-crd: Add Touchscreen and touchpad support

Rajendra Nayak (2):
  dt-bindings: arm: qcom: Document qcom,sc7280-crd board
  arm64: dts: qcom: sc7280-crd: Add device tree files for CRD

 Documentation/devicetree/bindings/arm/qcom.yaml |   6 +-
 arch/arm64/boot/dts/qcom/Makefile               |   1 +
 arch/arm64/boot/dts/qcom/sc7280-crd.dts         |  93 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi  | 105 ++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280-idp2.dts        |   1 +
 5 files changed, 204 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sc7280-crd.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi