[v2,00/13] Enable GPU for SM8150 and SM8250

Message

Jonathan Marek June 29, 2020, 5:20 p.m. UTC

This series adds the missing clock drivers and dts nodes to enable
the GPU on both SM8150 and SM8250.

Note an extra patch [1] is still required for GPU to work on SM8250.

Changes in V2:
* Added "clk: qcom: gcc: fix sm8150 GPU and NPU clocks" to fix the newly added
  SM8150 GPU gcc clocks
* Added "Fixes:" tag to "clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL"
* Added yaml schemas to gpucc dt-bindings patches
* Added "clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers" and changed
  gpucc patches to use it.
* Removed CLK_IS_CRITICAL from gpu_cc_ahb_clk
* Added missing rpmh regulator level for sm8250 GPU clock levels
* Use sm8150/sm8250 iommu compatibles in dts
* Add gcc_gpu_gpll0_clk_src/gcc_gpu_gpll0_div_clk_src to gpucc clocks in dts

[1] https://gist.github.com/flto/784f1aca761ebf2fe6c105719a4a04ca

Jonathan Marek (13):
  clk: qcom: gcc: fix sm8150 GPU and NPU clocks
  clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL
  clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid
  clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pll
  clk: qcom: gcc: remove unnecessary vco_table from SM8150
  dt-bindings: clock: Introduce SM8150 QCOM Graphics clock bindings
  dt-bindings: clock: Introduce SM8250 QCOM Graphics clock bindings
  clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers
  clk: qcom: Add graphics clock controller driver for SM8150
  clk: qcom: Add graphics clock controller driver for SM8250
  dt-bindings: power: Add missing rpmpd rpmh regulator level
  arm64: dts: qcom: add sm8150 GPU nodes
  arm64: dts: qcom: add sm8250 GPU nodes

 .../bindings/clock/qcom,sm8150-gpucc.yaml     |  74 +++
 .../bindings/clock/qcom,sm8250-gpucc.yaml     |  74 +++
 arch/arm64/boot/dts/qcom/sm8150.dtsi          | 136 ++++++
 arch/arm64/boot/dts/qcom/sm8250.dtsi          | 143 ++++++
 drivers/clk/qcom/Kconfig                      |  16 +
 drivers/clk/qcom/Makefile                     |   2 +
 drivers/clk/qcom/clk-alpha-pll.c              |  70 ++-
 drivers/clk/qcom/clk-alpha-pll.h              |  15 +-
 drivers/clk/qcom/gcc-sm8150.c                 |  26 +-
 drivers/clk/qcom/gdsc.c                       |  25 +
 drivers/clk/qcom/gdsc.h                       |   1 +
 drivers/clk/qcom/gpucc-sc7180.c               |  27 +-
 drivers/clk/qcom/gpucc-sdm845.c               |  27 +-
 drivers/clk/qcom/gpucc-sm8150.c               | 421 ++++++++++++++++
 drivers/clk/qcom/gpucc-sm8250.c               | 450 ++++++++++++++++++
 include/dt-bindings/clock/qcom,gpucc-sm8150.h |  40 ++
 include/dt-bindings/clock/qcom,gpucc-sm8250.h |  40 ++
 include/dt-bindings/power/qcom-rpmpd.h        |   1 +
 18 files changed, 1479 insertions(+), 109 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm8150-gpucc.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm8250-gpucc.yaml
 create mode 100644 drivers/clk/qcom/gpucc-sm8150.c
 create mode 100644 drivers/clk/qcom/gpucc-sm8250.c
 create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8150.h
 create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8250.h