mbox series

[0/4] Add binding and dts for Qualcomm SM8350

Message ID 20201204054347.2877857-1-vkoul@kernel.org (mailing list archive)
Headers show
Series Add binding and dts for Qualcomm SM8350 | expand

Message

Vinod Koul Dec. 4, 2020, 5:43 a.m. UTC 
Hi,

This series adds the compatible for SM8350 SoC, board and aoss compatible.
Then the base DTS for SM8350 SoC which contains clock (gcc, rpmh), pinctrl,
uart, reserved memory and cpu nodes. The board file for MTP enables uart and
adds the rpmh regulators

Vinod Koul (4):
  dt-bindings: arm: qcom: Document SM8350 SoC and boards
  soc: qcom: aoss: Add SM8350 compatible
  arm64: dts: qcom: Add basic devicetree support for SM8350 SoC
  arm64: dts: qcom: Add basic devicetree support for SM8350-MTP board

 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 .../bindings/soc/qcom/qcom,aoss-qmp.txt       |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/sm8350-mtp.dts       | 246 +++++++++
 arch/arm64/boot/dts/qcom/sm8350.dtsi          | 496 ++++++++++++++++++
 drivers/soc/qcom/qcom_aoss.c                  |   1 +
 6 files changed, 751 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8350-mtp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm8350.dtsi

Thanks