[v2,0/6] Add binding and dts for Qualcomm SM8350 SoC

Message

Vinod Koul Jan. 27, 2021, 12:30 p.m. UTC

Hi,

This series adds the compatible for SM8350 SoC, boardi, cpu, scm and aoss
compatible.  Then the base DTS for SM8350 SoC which contains clock (gcc,
rpmh), pinctrl, uart, reserved memory and cpu nodes. The board file for MTP
enables uart and adds the rpmh regulators

Changes in v2:
 - Add ack by Rob recieved for v1
 - Document cpu and scm compatible and use soc specific scm compatible
 - Fix errors pointed by Rob and make dtbs_check as well as W=1 compilation

Vinod Koul (6):
  dt-bindings: arm: qcom: Document SM8350 SoC and boards
  soc: qcom: aoss: Add SM8350 compatible
  dt-bindings: arm: cpus: Add kryo685 compatible
  dt-bindings: firmware: scm: Add SM8250 and SM8350 compatible
  arm64: dts: qcom: Add basic devicetree support for SM8350 SoC
  arm64: dts: qcom: Add basic devicetree support for SM8350-MTP board

 .../devicetree/bindings/arm/cpus.yaml         |   1 +
 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 .../devicetree/bindings/firmware/qcom,scm.txt |   2 +
 .../bindings/soc/qcom/qcom,aoss-qmp.txt       |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/sm8350-mtp.dts       | 250 +++++++++
 arch/arm64/boot/dts/qcom/sm8350.dtsi          | 499 ++++++++++++++++++
 drivers/soc/qcom/qcom_aoss.c                  |   1 +
 8 files changed, 761 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8350-mtp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm8350.dtsi