mbox series

[00/10] SM6375/PDX225 GPI DMA, QUPs & PMIC peripherals

Message ID 20221109111236.46003-1-konrad.dybcio@linaro.org (mailing list archive)
Headers show
Series SM6375/PDX225 GPI DMA, QUPs & PMIC peripherals | expand

Message

Konrad Dybcio Nov. 9, 2022, 11:12 a.m. UTC 
This series adds support for:

- GPI DMA for 6375
- QUP hosts & I2C / SPI controllers for 6375
- pinctrl for SOME (check commit message of 05/10) of ^
- pmk8350 on sid6 (rather sad implementation, check 03/10 commit msg)
- touchscreen & SMD regulators on PDX225 (depends on [1])
- pmic peripherals on PDX225

As well as some necessary binding changes with it.

Patches 1-8 can be applied right away, 9 and 10 depend on:

[1] https://lore.kernel.org/linux-arm-msm/20221109110846.45789-1-konrad.dybcio@linaro.org/T/#t

Konrad Dybcio (10):
  dt-bindings: arm-smmu: Allow up to 3 power-domains
  dt-bindings: dmaengine: qcom: gpi: add compatible for SM6375
  arm64: dts: qcom: Add a device tree for PMK8350 on SID6
  arm64: dts: qcom: sm6375: Add GPI DMA nodes
  arm64: dts: qcom: sm6375: Add pin configs for some QUP configurations
  arm64: dts: qcom: sm6375: Add QUPs and corresponding SPI/I2C hosts
  arm64: dts: qcom: sm6375-pdx225: Enable QUPs & GPI DMA
  arm64: dts: qcom: sm6375-pdx225: Add PMIC peripherals
  arm64: dts: qcom: sm6375-pdx225: Configure SMD RPM regulators
  arm64: dts: qcom: sm6375-pdx225: Configure Samsung touchscreen

 .../devicetree/bindings/dma/qcom,gpi.yaml     |   1 +
 .../devicetree/bindings/iommu/arm,smmu.yaml   |   2 +-
 arch/arm64/boot/dts/qcom/pmk8350_sid6.dtsi    |  73 ++++
 .../qcom/sm6375-sony-xperia-murray-pdx225.dts | 251 +++++++++++
 arch/arm64/boot/dts/qcom/sm6375.dtsi          | 389 ++++++++++++++++++
 5 files changed, 715 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/qcom/pmk8350_sid6.dtsi