mbox series

[v2,0/9] SM6375/PDX225 GPI DMA, QUPs & PMIC peripherals

Message ID 20221114104222.36329-1-konrad.dybcio@linaro.org (mailing list archive)
Headers show
Series SM6375/PDX225 GPI DMA, QUPs & PMIC peripherals | expand

Message

Konrad Dybcio Nov. 14, 2022, 10:42 a.m. UTC 
This series adds support for:

- GPI DMA for 6375
- QUP hosts & I2C / SPI controllers for 6375
- pinctrl for SOME (check commit message of 05/10) of ^
- pmk8350 on arbitrary SID
- touchscreen & SMD regulators on PDX225 (depends on [1])
- pmic peripherals on PDX225

As well as some necessary binding changes with it.

Patches 1-8 can be applied right away, 9 and 10 depend on:

[1] https://lore.kernel.org/linux-arm-msm/20221109110846.45789-1-konrad.dybcio@linaro.org/T/#t

Changes since v1:
- (afaict) fix errors with [1/9]
- use preprocessor to swap out pmk8350 sid instead of hardcoding it
- pick up tags
- drop [v1 2/10] (dt-b for gpi) - applied
- sort the newly-added regulator nodes properly

Konrad Dybcio (9):
  dt-bindings: arm-smmu: Allow up to 3 power-domains
  arm64: dts: qcom: pmk8350: Allow specifying arbitrary SID
  arm64: dts: qcom: sm6375: Add GPI DMA nodes
  arm64: dts: qcom: sm6375: Add pin configs for some QUP configurations
  arm64: dts: qcom: sm6375: Add QUPs and corresponding SPI/I2C hosts
  arm64: dts: qcom: sm6375-pdx225: Enable QUPs & GPI DMA
  arm64: dts: qcom: sm6375-pdx225: Add PMIC peripherals
  arm64: dts: qcom: sm6375-pdx225: Configure SMD RPM regulators
  arm64: dts: qcom: sm6375-pdx225: Configure Samsung touchscreen

 .../devicetree/bindings/iommu/arm,smmu.yaml   |   3 +-
 arch/arm64/boot/dts/qcom/pmk8350.dtsi         |  19 +-
 .../qcom/sm6375-sony-xperia-murray-pdx225.dts | 254 ++++++++++++
 arch/arm64/boot/dts/qcom/sm6375.dtsi          | 389 ++++++++++++++++++
 4 files changed, 657 insertions(+), 8 deletions(-)