mbox series

[0/3] arm64: dts: qcom: sa8775p-ride: enable relevant QUPv3 IPs

Message ID 20230214155715.451130-1-brgl@bgdev.pl (mailing list archive)
Headers show
Series arm64: dts: qcom: sa8775p-ride: enable relevant QUPv3 IPs | expand

Message

Bartosz Golaszewski Feb. 14, 2023, 3:57 p.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This enables the QUPv3 interfaces that are exposed on the sa8775p-ride
board: I2C, SPI and the GNSS UART.

Bartosz Golaszewski (3):
  arm64: dts: qcom: sa8775p: add the i2c node for sa8775p-ride
  arm64: dts: qcom: sa8775p: add the SPI node for sa8775p-ride
  arm64: dts: qcom: sa8775p: add the GNSS high-speed UART for
    sa8775p-ride

 arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 67 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sa8775p.dtsi     | 72 +++++++++++++++++++++++
 2 files changed, 139 insertions(+)

Comments

Shazad Hussain Feb. 15, 2023, 7:06 a.m. UTC | #1
On 2/14/2023 9:27 PM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> This enables the QUPv3 interfaces that are exposed on the sa8775p-ride
> board: I2C, SPI and the GNSS UART.
> 
> Bartosz Golaszewski (3):
>    arm64: dts: qcom: sa8775p: add the i2c node for sa8775p-ride
>    arm64: dts: qcom: sa8775p: add the SPI node for sa8775p-ride
>    arm64: dts: qcom: sa8775p: add the GNSS high-speed UART for

Hi Bartosz,
This instance is for BT HS UART , not for GNSS.
For GNSS we have uart12 (0x00A94000).

-Shazad

>      sa8775p-ride
> 
>   arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 67 +++++++++++++++++++++
>   arch/arm64/boot/dts/qcom/sa8775p.dtsi     | 72 +++++++++++++++++++++++
>   2 files changed, 139 insertions(+)
>
Bartosz Golaszewski Feb. 15, 2023, 9:05 a.m. UTC | #2
On Wed, Feb 15, 2023 at 8:06 AM Shazad Hussain
<quic_shazhuss@quicinc.com> wrote:
>
>
>
> On 2/14/2023 9:27 PM, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> >
> > This enables the QUPv3 interfaces that are exposed on the sa8775p-ride
> > board: I2C, SPI and the GNSS UART.
> >
> > Bartosz Golaszewski (3):
> >    arm64: dts: qcom: sa8775p: add the i2c node for sa8775p-ride
> >    arm64: dts: qcom: sa8775p: add the SPI node for sa8775p-ride
> >    arm64: dts: qcom: sa8775p: add the GNSS high-speed UART for
>
> Hi Bartosz,
> This instance is for BT HS UART , not for GNSS.
> For GNSS we have uart12 (0x00A94000).
>

Thanks, I'll rectify it in v2.

Bart