From patchwork Wed Mar 8 23:57:23 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Wesley Cheng X-Patchwork-Id: 13166616 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1D910C74A4B for ; Wed, 8 Mar 2023 23:58:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230102AbjCHX6i (ORCPT ); Wed, 8 Mar 2023 18:58:38 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:35808 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229852AbjCHX6c (ORCPT ); Wed, 8 Mar 2023 18:58:32 -0500 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B92DB78CB6; Wed, 8 Mar 2023 15:58:29 -0800 (PST) Received: from pps.filterd (m0279862.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 328JngMA001661; Wed, 8 Mar 2023 23:58:06 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : mime-version : content-type; s=qcppdkim1; bh=nTuiazLy3Z2pJ9PRSFM+dwiIjrSjbWYYAz3/lmpti7Q=; b=lH3ALdYMIP9+PdfMcyR1FF5rWlduNNQoizE6xin9s41/X2SskEfCT3haBx4lzBrcFs0G /eSZFyOUBueNzJzvp6isIhkL+EtqSD+dgMrKsfLU3LCaEdnNImwoZ+vmZIzSlDMHv5mR Uz7p/alYCYDRz2epGJgnU3LAM/WbnJQ/2CBlPjnjjpD0q/rABwjJ5GS7hBhtTHHLKDd3 dSgZgAiVedQOFYnuMin5n/zCFLBmGOCjyJiJ9m29966GxxiUR038i5Ef5xWFr9VPjXmV Mk9UhTEUgT4IKXkH7FpmgNKthn19MTEBLbcz4kx4TF50A6We8kl8kNEDlFZWM9usquCW Ag== Received: from nalasppmta04.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3p6wcmh3dm-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 08 Mar 2023 23:58:05 +0000 Received: from nalasex01b.na.qualcomm.com (nalasex01b.na.qualcomm.com [10.47.209.197]) by NALASPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 328Nw5nF016225 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 8 Mar 2023 23:58:05 GMT Received: from hu-wcheng-lv.qualcomm.com (10.49.16.6) by nalasex01b.na.qualcomm.com (10.47.209.197) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.41; Wed, 8 Mar 2023 15:58:04 -0800 From: Wesley Cheng To: , , , , , , , , , , , , CC: , , , , , , , Wesley Cheng Subject: [PATCH v3 00/28] Introduce QC USB SND audio offloading support Date: Wed, 8 Mar 2023 15:57:23 -0800 Message-ID: <20230308235751.495-1-quic_wcheng@quicinc.com> X-Mailer: git-send-email 2.17.1 MIME-Version: 1.0 X-Originating-IP: [10.49.16.6] X-ClientProxiedBy: nalasex01a.na.qualcomm.com (10.47.209.196) To nalasex01b.na.qualcomm.com (10.47.209.197) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 3kRs6hx913S2qqheIssUEvHTG9PQ8yT_ X-Proofpoint-ORIG-GUID: 3kRs6hx913S2qqheIssUEvHTG9PQ8yT_ X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.942,Hydra:6.0.573,FMLib:17.11.170.22 definitions=2023-03-08_15,2023-03-08_03,2023-02-09_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 malwarescore=0 spamscore=0 adultscore=0 bulkscore=0 mlxlogscore=999 clxscore=1015 priorityscore=1501 lowpriorityscore=0 impostorscore=0 suspectscore=0 phishscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2212070000 definitions=main-2303080200 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Changes in v3: - Changed prefix from RFC to PATCH - Rebased entire series to usb-next - Updated copyright years XHCI: - Rebased changes on top of XHCI changes merged into usb-next, and only added changes that were still under discussion. - Added change to read in the "num-hc-interrupters" device property. ASoC: - qusb6 USB backend - Incorporated suggestions to fetch iommu information with existing APIs - Added two new sound kcontrols to fetch offload status and offload device selection. - offload status - will return the card and pcm device in use tinymix -D 0 get 1 --> 1, 0 (offload in progress on card#1 pcm#0) - device selection - set the card and pcm device to enable offload on. Ex.: tinymix -D 0 set 1 2 0 --> sets offload on card#2 pcm#0 (this should be the USB card) USB SND: - Fixed up some locking related concerns for registering platform ops. - Moved callbacks under the register_mutex, so that - Modified APIs to properly pass more information about the USB SND device, so that the Q6USB backend can build a device list/map, in order to monitor offload status and device selection. Changes in v2: XHCI: - Replaced XHCI and HCD changes with Mathias' XHCI interrupter changes in his tree: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feature_interrupters Adjustments made to Mathias' changes: - Created xhci-intr.h to export/expose interrupter APIs versus exposing xhci.h. Moved dependent structures to this file as well. (so clients can parse out information from "struct xhci_interrupter") - Added some basic locking when requesting interrupters. - Fixed up some sanity checks. - Removed clearing of the ERSTBA during freeing of the interrupter. (pending issue where SMMU fault occurs if DMA addr returned is 64b - TODO) - Clean up pending events in the XHCI secondary interrupter. While testing USB bus suspend, it was seen that on bus resume, the xHCI HC would run into a command timeout. - Added offloading APIs to xHCI to fetch transfer and event ring information. ASoC: - Modified soc-usb to allow for multiple USB port additions. For this to work, the USB offload driver has to have a reference to the USB backend by adding a "usb-soc-be" DT entry to the device saved into XHCI sysdev. - Created separate dt-bindings for defining USB_RX port. - Increased APR timeout to accommodate the situation where the AFE port start command could be delayed due to having to issue a USB bus resume while handling the QMI stream start command. USB SND: - Added a platform ops during usb_audio_suspend(). This allows for the USB offload driver to halt the audio stream when system enters PM suspend. This ensures the audio DSP is not issuing transfers on the USB bus. - Do not override platform ops if they are already populated. - Introduce a shared status variable between the USB offload and USB SND layers, to ensure that only one path is active at a time. If the USB bus is occupied, then userspace is notified that the path is busy. Several Qualcomm based chipsets can support USB audio offloading to a dedicated audio DSP, which can take over issuing transfers to the USB host controller. The intention is to reduce the load on the main processors in the SoC, and allow them to be placed into lower power modes. There are several parts to this design: 1. Adding ASoC binding layer 2. Create a USB backend for Q6DSP 3. Introduce XHCI interrupter support 4. Create vendor ops for the USB SND driver Adding ASoC binding layer: soc-usb: Intention is to treat a USB port similar to a headphone jack. The port is always present on the device, but cable/pin status can be enabled/disabled. Expose mechanisms for USB backend ASoC drivers to communicate with USB SND. Create a USB backend for Q6DSP: q6usb: Basic backend driver that will be responsible for maintaining the resources needed to initiate a playback stream using the Q6DSP. Will be the entity that checks to make sure the connected USB audio device supports the requested PCM format. If it does not, the PCM open call will fail, and userpsace ALSA can take action accordingly. Introduce XHCI interrupter support: XHCI HCD supports multiple interrupters, which allows for events to be routed to different event rings. This is determined by "Interrupter Target" field specified in Section "6.4.1.1 Normal TRB" of the XHCI specification. Events in the offloading case will be routed to an event ring that is assigned to the audio DSP. Create vendor ops for the USB SND driver: qc_audio_offload: This particular driver has several components associated with it: - QMI stream request handler - XHCI interrupter and resource management - audio DSP memory management When the audio DSP wants to enable a playback stream, the request is first received by the ASoC platform sound card. Depending on the selected route, ASoC will bring up the individual DAIs in the path. The Q6USB backend DAI will send an AFE port start command (with enabling the USB playback path), and the audio DSP will handle the request accordingly. Part of the AFE USB port start handling will have an exchange of control messages using the QMI protocol. The qc_audio_offload driver will populate the buffer information: - Event ring base address - EP transfer ring base address and pass it along to the audio DSP. All endpoint management will now be handed over to the DSP, and the main processor is not involved in transfers. Overall, implementing this feature will still expose separate sound card and PCM devices for both the platorm card and USB audio device: 0 [SM8250MTPWCD938]: sm8250 - SM8250-MTP-WCD9380-WSA8810-VA-D SM8250-MTP-WCD9380-WSA8810-VA-DMIC 1 [Audio ]: USB-Audio - USB Audio Generic USB Audio at usb-xhci-hcd.1.auto-1.4, high speed This is to ensure that userspace ALSA entities can decide which route to take when executing the audio playback. In the above, if card#1 is selected, then USB audio data will take the legacy path over the USB PCM drivers, etc... This feature was validated using: - tinymix: set/enable the multimedia path to route to USB backend - tinyplay: issue playback on platform card Mathias Nyman (1): xhci: Add support to allocate several interrupters Wesley Cheng (27): usb: xhci: Add XHCI APIs to support USB offloading usb: host: xhci-mem: Cleanup pending secondary event ring events ASoC: Add SOC USB APIs for adding an USB backend ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp ASoC: qdsp6: q6afe: Increase APR timeout ASoC: qcom: Add USB backend ASoC driver for Q6 sound: usb: card: Introduce USB SND platform op callbacks sound: usb: Export USB SND APIs for modules dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition usb: dwc3: Add DT parameter to specify maximum number of interrupters usb: host: xhci-plat: Set XHCI max interrupters if property is present sound: usb: pcm: Export fixed rate check USB SND API sound: usb: Introduce QC USB SND offloading support sound: usb: card: Check for support for requested audio format sound: soc: soc-usb: Add PCM format check API for USB backend sound: soc: qcom: qusb6: Ensure PCM format is supported by USB audio device sound: usb: Prevent starting of audio stream if in use ASoC: dt-bindings: Add Q6USB backend bindings ASoC: dt-bindings: Update example for enabling USB offload on SM8250 ASoC: qcom: qdsp6: q6afe: Split USB AFE dev_token param into separate API sound: Pass USB SND card and PCM information to SOC USB sound: soc: qdsp6: Add SND kcontrol to select offload device sound: soc: qdsp6: Add SND kcontrol for fetching offload status sound: usb: qc_audio_offload: Use card and PCM index from QMI request sound: usb: card: Allow for rediscovery of connected USB SND devices sound: soc: soc-usb: Rediscover USB SND devices on USB port add .../bindings/sound/qcom,q6usb-dais.yaml | 49 + .../bindings/sound/qcom,sm8250.yaml | 15 + .../devicetree/bindings/usb/snps,dwc3.yaml | 13 + drivers/usb/dwc3/core.c | 12 + drivers/usb/dwc3/core.h | 2 + drivers/usb/dwc3/host.c | 5 +- drivers/usb/host/xhci-debugfs.c | 2 +- drivers/usb/host/xhci-mem.c | 171 +- drivers/usb/host/xhci-plat.c | 2 + drivers/usb/host/xhci-ring.c | 2 +- drivers/usb/host/xhci.c | 181 +- drivers/usb/host/xhci.h | 2 +- .../sound/qcom,q6dsp-lpass-ports.h | 1 + include/linux/usb/xhci-intr.h | 94 + include/sound/pcm_params.h | 4 + include/sound/q6usboffload.h | 20 + include/sound/soc-usb.h | 39 + sound/core/oss/pcm_oss.c | 58 - sound/core/pcm_lib.c | 65 + sound/soc/Makefile | 2 +- sound/soc/qcom/Kconfig | 4 + sound/soc/qcom/qdsp6/Makefile | 1 + sound/soc/qcom/qdsp6/q6afe-dai.c | 50 + sound/soc/qcom/qdsp6/q6afe.c | 208 +- sound/soc/qcom/qdsp6/q6afe.h | 47 +- sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 23 + sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 1 + sound/soc/qcom/qdsp6/q6routing.c | 9 + sound/soc/qcom/qdsp6/q6usb.c | 445 ++++ sound/soc/soc-usb.c | 197 ++ sound/usb/Kconfig | 14 + sound/usb/Makefile | 2 +- sound/usb/card.c | 85 + sound/usb/card.h | 31 + sound/usb/endpoint.c | 2 + sound/usb/helper.c | 1 + sound/usb/pcm.c | 29 +- sound/usb/pcm.h | 12 + sound/usb/qcom/Makefile | 2 + sound/usb/qcom/qc_audio_offload.c | 1790 +++++++++++++++++ sound/usb/qcom/usb_audio_qmi_v01.c | 892 ++++++++ sound/usb/qcom/usb_audio_qmi_v01.h | 162 ++ 42 files changed, 4646 insertions(+), 100 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml create mode 100644 include/linux/usb/xhci-intr.h create mode 100644 include/sound/q6usboffload.h create mode 100644 include/sound/soc-usb.h create mode 100644 sound/soc/qcom/qdsp6/q6usb.c create mode 100644 sound/soc/soc-usb.c create mode 100644 sound/usb/qcom/Makefile create mode 100644 sound/usb/qcom/qc_audio_offload.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.h