Message ID | 20230421-fp4-bluetooth-v2-0-3de840d5483e@fairphone.com (mailing list archive) |
---|---|
Headers | show |
Series | Add WCN3988 Bluetooth support for Fairphone 4 | expand |
Hi Luca, On Fri, May 12, 2023 at 6:58 AM Luca Weiss <luca.weiss@fairphone.com> wrote: > > Add support in the btqca/hci_qca driver for the WCN3988 and add it to > the sm7225 Fairphone 4 devicetree. > > Devicetree patches go via Qualcomm tree, the rest via their respective > trees. Just to be sure, patches 1-2 shall be applied to bluetooth-next the remaining are going to be handled elsewhere? > -- > Previously with the RFC version I've had problems before with Bluetooth > scanning failing like the following: > > [bluetooth]# scan on > Failed to start discovery: org.bluez.Error.InProgress > > [ 202.371374] Bluetooth: hci0: Opcode 0x200b failed: -16 > > This appears to only happen with driver built-in (=y) when the supported > local commands list doesn't get updated in the Bluetooth core and > use_ext_scan() returning false. I'll try to submit this separately since > this now works well enough with =m. But in both cases (=y, =m) it's > behaving a bit weirdly before (re-)setting the MAC address with "sudo > btmgmt public-addr fo:oo:ba:ar" > > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > --- > Changes in v2: > - Add pinctrl & 'tlmm 64' irq to uart node > - Pick up tags > - Link to v1: https://lore.kernel.org/r/20230421-fp4-bluetooth-v1-0-0430e3a7e0a2@fairphone.com > > --- > Luca Weiss (4): > dt-bindings: net: qualcomm: Add WCN3988 > Bluetooth: btqca: Add WCN3988 support > arm64: dts: qcom: sm6350: add uart1 node > arm64: dts: qcom: sm7225-fairphone-fp4: Add Bluetooth > > .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 2 + > arch/arm64/boot/dts/qcom/sm6350.dtsi | 63 +++++++++++++ > arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 103 +++++++++++++++++++++ > drivers/bluetooth/btqca.c | 13 ++- > drivers/bluetooth/btqca.h | 12 ++- > drivers/bluetooth/hci_qca.c | 12 +++ > 6 files changed, 201 insertions(+), 4 deletions(-) > --- > base-commit: f2fe50eb7ca6b7bc6c63745f5c26f7c6022fcd4a > change-id: 20230421-fp4-bluetooth-b36a0e87b9c8 > > Best regards, > -- > Luca Weiss <luca.weiss@fairphone.com> >
On Fri May 12, 2023 at 10:53 PM CEST, Luiz Augusto von Dentz wrote: > Hi Luca, > > On Fri, May 12, 2023 at 6:58 AM Luca Weiss <luca.weiss@fairphone.com> wrote: > > > > Add support in the btqca/hci_qca driver for the WCN3988 and add it to > > the sm7225 Fairphone 4 devicetree. > > > > Devicetree patches go via Qualcomm tree, the rest via their respective > > trees. > > Just to be sure, patches 1-2 shall be applied to bluetooth-next the > remaining are going to be handled elsewhere? Sounds good. > > > -- > > Previously with the RFC version I've had problems before with Bluetooth > > scanning failing like the following: > > > > [bluetooth]# scan on > > Failed to start discovery: org.bluez.Error.InProgress > > > > [ 202.371374] Bluetooth: hci0: Opcode 0x200b failed: -16 > > > > This appears to only happen with driver built-in (=y) when the supported > > local commands list doesn't get updated in the Bluetooth core and > > use_ext_scan() returning false. I'll try to submit this separately since > > this now works well enough with =m. But in both cases (=y, =m) it's > > behaving a bit weirdly before (re-)setting the MAC address with "sudo > > btmgmt public-addr fo:oo:ba:ar" > > > > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > > --- > > Changes in v2: > > - Add pinctrl & 'tlmm 64' irq to uart node > > - Pick up tags > > - Link to v1: https://lore.kernel.org/r/20230421-fp4-bluetooth-v1-0-0430e3a7e0a2@fairphone.com > > > > --- > > Luca Weiss (4): > > dt-bindings: net: qualcomm: Add WCN3988 > > Bluetooth: btqca: Add WCN3988 support > > arm64: dts: qcom: sm6350: add uart1 node > > arm64: dts: qcom: sm7225-fairphone-fp4: Add Bluetooth > > > > .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 2 + > > arch/arm64/boot/dts/qcom/sm6350.dtsi | 63 +++++++++++++ > > arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 103 +++++++++++++++++++++ > > drivers/bluetooth/btqca.c | 13 ++- > > drivers/bluetooth/btqca.h | 12 ++- > > drivers/bluetooth/hci_qca.c | 12 +++ > > 6 files changed, 201 insertions(+), 4 deletions(-) > > --- > > base-commit: f2fe50eb7ca6b7bc6c63745f5c26f7c6022fcd4a > > change-id: 20230421-fp4-bluetooth-b36a0e87b9c8 > > > > Best regards, > > -- > > Luca Weiss <luca.weiss@fairphone.com> > >
On Fri, 12 May 2023 15:58:22 +0200, Luca Weiss wrote: > Add support in the btqca/hci_qca driver for the WCN3988 and add it to > the sm7225 Fairphone 4 devicetree. > > Devicetree patches go via Qualcomm tree, the rest via their respective > trees. > > -- > Previously with the RFC version I've had problems before with Bluetooth > scanning failing like the following: > > [...] Applied, thanks! [3/4] arm64: dts: qcom: sm6350: add uart1 node commit: b179f35b887b2d17e93f1827550290669bc6b110 [4/4] arm64: dts: qcom: sm7225-fairphone-fp4: Add Bluetooth commit: c4ef464b24c5aefb7e23eb8fcc08250a783a529b Best regards,
Hi Luiz, On Mon May 15, 2023 at 8:12 AM CEST, Luca Weiss wrote: > On Fri May 12, 2023 at 10:53 PM CEST, Luiz Augusto von Dentz wrote: > > Hi Luca, > > > > On Fri, May 12, 2023 at 6:58 AM Luca Weiss <luca.weiss@fairphone.com> wrote: > > > > > > Add support in the btqca/hci_qca driver for the WCN3988 and add it to > > > the sm7225 Fairphone 4 devicetree. > > > > > > Devicetree patches go via Qualcomm tree, the rest via their respective > > > trees. > > > > Just to be sure, patches 1-2 shall be applied to bluetooth-next the > > remaining are going to be handled elsewhere? > > Sounds good. Is anything missing for the patches 1 & 2 to be applied? I don't see them yet in linux-next. Should I resend them? Regards Luca > > > > > > -- > > > Previously with the RFC version I've had problems before with Bluetooth > > > scanning failing like the following: > > > > > > [bluetooth]# scan on > > > Failed to start discovery: org.bluez.Error.InProgress > > > > > > [ 202.371374] Bluetooth: hci0: Opcode 0x200b failed: -16 > > > > > > This appears to only happen with driver built-in (=y) when the supported > > > local commands list doesn't get updated in the Bluetooth core and > > > use_ext_scan() returning false. I'll try to submit this separately since > > > this now works well enough with =m. But in both cases (=y, =m) it's > > > behaving a bit weirdly before (re-)setting the MAC address with "sudo > > > btmgmt public-addr fo:oo:ba:ar" > > > > > > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > > > --- > > > Changes in v2: > > > - Add pinctrl & 'tlmm 64' irq to uart node > > > - Pick up tags > > > - Link to v1: https://lore.kernel.org/r/20230421-fp4-bluetooth-v1-0-0430e3a7e0a2@fairphone.com > > > > > > --- > > > Luca Weiss (4): > > > dt-bindings: net: qualcomm: Add WCN3988 > > > Bluetooth: btqca: Add WCN3988 support > > > arm64: dts: qcom: sm6350: add uart1 node > > > arm64: dts: qcom: sm7225-fairphone-fp4: Add Bluetooth > > > > > > .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 2 + > > > arch/arm64/boot/dts/qcom/sm6350.dtsi | 63 +++++++++++++ > > > arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 103 +++++++++++++++++++++ > > > drivers/bluetooth/btqca.c | 13 ++- > > > drivers/bluetooth/btqca.h | 12 ++- > > > drivers/bluetooth/hci_qca.c | 12 +++ > > > 6 files changed, 201 insertions(+), 4 deletions(-) > > > --- > > > base-commit: f2fe50eb7ca6b7bc6c63745f5c26f7c6022fcd4a > > > change-id: 20230421-fp4-bluetooth-b36a0e87b9c8 > > > > > > Best regards, > > > -- > > > Luca Weiss <luca.weiss@fairphone.com> > > >
Hi Luca, On Tue, Aug 1, 2023 at 3:07 AM Luca Weiss <luca.weiss@fairphone.com> wrote: > > Hi Luiz, > > On Mon May 15, 2023 at 8:12 AM CEST, Luca Weiss wrote: > > On Fri May 12, 2023 at 10:53 PM CEST, Luiz Augusto von Dentz wrote: > > > Hi Luca, > > > > > > On Fri, May 12, 2023 at 6:58 AM Luca Weiss <luca.weiss@fairphone.com> wrote: > > > > > > > > Add support in the btqca/hci_qca driver for the WCN3988 and add it to > > > > the sm7225 Fairphone 4 devicetree. > > > > > > > > Devicetree patches go via Qualcomm tree, the rest via their respective > > > > trees. > > > > > > Just to be sure, patches 1-2 shall be applied to bluetooth-next the > > > remaining are going to be handled elsewhere? > > > > Sounds good. > > Is anything missing for the patches 1 & 2 to be applied? I don't see > them yet in linux-next. Should I resend them? Looks like this set is no longer on patchwork, could you please resend? > Regards > Luca > > > > > > > > > > -- > > > > Previously with the RFC version I've had problems before with Bluetooth > > > > scanning failing like the following: > > > > > > > > [bluetooth]# scan on > > > > Failed to start discovery: org.bluez.Error.InProgress > > > > > > > > [ 202.371374] Bluetooth: hci0: Opcode 0x200b failed: -16 > > > > > > > > This appears to only happen with driver built-in (=y) when the supported > > > > local commands list doesn't get updated in the Bluetooth core and > > > > use_ext_scan() returning false. I'll try to submit this separately since > > > > this now works well enough with =m. But in both cases (=y, =m) it's > > > > behaving a bit weirdly before (re-)setting the MAC address with "sudo > > > > btmgmt public-addr fo:oo:ba:ar" > > > > > > > > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > > > > --- > > > > Changes in v2: > > > > - Add pinctrl & 'tlmm 64' irq to uart node > > > > - Pick up tags > > > > - Link to v1: https://lore.kernel.org/r/20230421-fp4-bluetooth-v1-0-0430e3a7e0a2@fairphone.com > > > > > > > > --- > > > > Luca Weiss (4): > > > > dt-bindings: net: qualcomm: Add WCN3988 > > > > Bluetooth: btqca: Add WCN3988 support > > > > arm64: dts: qcom: sm6350: add uart1 node > > > > arm64: dts: qcom: sm7225-fairphone-fp4: Add Bluetooth > > > > > > > > .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 2 + > > > > arch/arm64/boot/dts/qcom/sm6350.dtsi | 63 +++++++++++++ > > > > arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 103 +++++++++++++++++++++ > > > > drivers/bluetooth/btqca.c | 13 ++- > > > > drivers/bluetooth/btqca.h | 12 ++- > > > > drivers/bluetooth/hci_qca.c | 12 +++ > > > > 6 files changed, 201 insertions(+), 4 deletions(-) > > > > --- > > > > base-commit: f2fe50eb7ca6b7bc6c63745f5c26f7c6022fcd4a > > > > change-id: 20230421-fp4-bluetooth-b36a0e87b9c8 > > > > > > > > Best regards, > > > > -- > > > > Luca Weiss <luca.weiss@fairphone.com> > > > > >
Add support in the btqca/hci_qca driver for the WCN3988 and add it to the sm7225 Fairphone 4 devicetree. Devicetree patches go via Qualcomm tree, the rest via their respective trees. -- Previously with the RFC version I've had problems before with Bluetooth scanning failing like the following: [bluetooth]# scan on Failed to start discovery: org.bluez.Error.InProgress [ 202.371374] Bluetooth: hci0: Opcode 0x200b failed: -16 This appears to only happen with driver built-in (=y) when the supported local commands list doesn't get updated in the Bluetooth core and use_ext_scan() returning false. I'll try to submit this separately since this now works well enough with =m. But in both cases (=y, =m) it's behaving a bit weirdly before (re-)setting the MAC address with "sudo btmgmt public-addr fo:oo:ba:ar" Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- Changes in v2: - Add pinctrl & 'tlmm 64' irq to uart node - Pick up tags - Link to v1: https://lore.kernel.org/r/20230421-fp4-bluetooth-v1-0-0430e3a7e0a2@fairphone.com --- Luca Weiss (4): dt-bindings: net: qualcomm: Add WCN3988 Bluetooth: btqca: Add WCN3988 support arm64: dts: qcom: sm6350: add uart1 node arm64: dts: qcom: sm7225-fairphone-fp4: Add Bluetooth .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 2 + arch/arm64/boot/dts/qcom/sm6350.dtsi | 63 +++++++++++++ arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 103 +++++++++++++++++++++ drivers/bluetooth/btqca.c | 13 ++- drivers/bluetooth/btqca.h | 12 ++- drivers/bluetooth/hci_qca.c | 12 +++ 6 files changed, 201 insertions(+), 4 deletions(-) --- base-commit: f2fe50eb7ca6b7bc6c63745f5c26f7c6022fcd4a change-id: 20230421-fp4-bluetooth-b36a0e87b9c8 Best regards,