[0/3] Add APSS clock driver support for IPQ5018

Message

Gokul Sriram P Aug. 29, 2023, 9:54 a.m. UTC

This series adds support for the APSS clock to bump the CPU frequency
above 800MHz. APSS PLL found in the IPQ5018 is of type Stromer. 

- The first patch in the series adds the required a53pll compatible.

- The second patch adds Stormer PLL offsets, its configuration values and
regmap and modify probe to reuse clk_stromer_pll_configure() for Stormer
which was added for Stormer Plus.

- The third patch adds dts nodes to enable the pll along with the cpu
operating frequency table.

Gokul Sriram Palanisamy (3):
  dt-bindings: clock: qcom,a53pll: add IPQ5018 compatible
  clk: qcom: apss-ipq-pll: add support for IPQ5018
  arm64: dts: qcom: ipq5018: enable the CPUFreq support

 .../bindings/clock/qcom,a53pll.yaml           |  1 +
 arch/arm64/boot/dts/qcom/ipq5018.dtsi         | 34 ++++++++++++
 drivers/clk/qcom/apss-ipq-pll.c               | 52 ++++++++++++++++++-
 3 files changed, 86 insertions(+), 1 deletion(-)