| Message ID | 20231013114843.63205-1-brgl@bgdev.pl (mailing list archive) |
|---|---|
| Headers | show |
| Series | arm64: qcom: add and enable SHM Bridge support | expand |
On Fri, Oct 13, 2023 at 01:48:28PM +0200, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > This is pretty much another full rewrite of the SHM Bridge support > series. After more on- and off-list discussions I think this time it > will be close to the final thing though. > > We've established the need for using separate pools for SCM and QSEECOM > as well as the upcoming scminvoke driver. > > It's also become clear that in order to be future-proof, the new > allocator must be an abstraction layer of a higher level as the SHM > Bridge will not be the only memory protection mechanism that we'll see > upstream. Hence the rename to TrustZone Memory rather than SCM Memory > allocator. > > Also to that end: the new allocator is its own module now and provides a > Kconfig choice menu for selecting the mode of operation (currently > default and SHM Bridge). > > Due to a high divergence from v2, I dropped all tags except for > patch 1/15 which didn't change. > > Tested on sm8550 and sa8775p with the Inline Crypto Engine and > remoteproc. I took this for a spin on my x13s with SHM bridge enabled and don't see any issues in the usecases that exercises. Also running on a debug kernel with no warnings, etc. Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s > > v3 -> v4: > - include linux/sizes.h for SZ_X macros > - use dedicated RCU APIs to dereference radix tree slots > - fix kerneldocs > - fix the comment in patch 14/15: it's the hypervisor, not the TrustZone > that creates the SHM bridge > > v2 -> v3: > - restore pool management and use separate pools for different users > - don't use the new allocator in qcom_scm_pas_init_image() as the > TrustZone will create an SHM bridge for us here > - rewrite the entire series again for most part > > v1 -> v2: > - too many changes to list, it's a complete rewrite as explained above > > Bartosz Golaszewski (15): > firmware: qcom: move Qualcomm code into its own directory > firmware: qcom: scm: add a missing forward declaration for struct > device > firmware: qcom: scm: remove unneeded 'extern' specifiers > firmware: qcom: add a dedicated TrustZone buffer allocator > firmware: qcom: scm: enable the TZ mem allocator > firmware: qcom: scm: smc: switch to using the SCM allocator > firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator > firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator > firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator > firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ > allocator > firmware: qcom: qseecom: convert to using the TZ allocator > firmware: qcom: scm: add support for SHM bridge operations > firmware: qcom: tzmem: enable SHM Bridge support > firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image() > arm64: defconfig: enable SHM Bridge support for the TZ memory > allocator > > MAINTAINERS | 4 +- > arch/arm64/configs/defconfig | 1 + > drivers/firmware/Kconfig | 48 +-- > drivers/firmware/Makefile | 5 +- > drivers/firmware/qcom/Kconfig | 86 +++++ > drivers/firmware/qcom/Makefile | 10 + > drivers/firmware/{ => qcom}/qcom_qseecom.c | 0 > .../{ => qcom}/qcom_qseecom_uefisecapp.c | 261 +++++-------- > drivers/firmware/{ => qcom}/qcom_scm-legacy.c | 0 > drivers/firmware/{ => qcom}/qcom_scm-smc.c | 28 +- > drivers/firmware/{ => qcom}/qcom_scm.c | 179 +++++---- > drivers/firmware/{ => qcom}/qcom_scm.h | 21 +- > drivers/firmware/qcom/qcom_tzmem.c | 365 ++++++++++++++++++ > drivers/firmware/qcom/qcom_tzmem.h | 13 + > include/linux/firmware/qcom/qcom_qseecom.h | 4 +- > include/linux/firmware/qcom/qcom_scm.h | 6 + > include/linux/firmware/qcom/qcom_tzmem.h | 28 ++ > 17 files changed, 746 insertions(+), 313 deletions(-) > create mode 100644 drivers/firmware/qcom/Kconfig > create mode 100644 drivers/firmware/qcom/Makefile > rename drivers/firmware/{ => qcom}/qcom_qseecom.c (100%) > rename drivers/firmware/{ => qcom}/qcom_qseecom_uefisecapp.c (84%) > rename drivers/firmware/{ => qcom}/qcom_scm-legacy.c (100%) > rename drivers/firmware/{ => qcom}/qcom_scm-smc.c (91%) > rename drivers/firmware/{ => qcom}/qcom_scm.c (93%) > rename drivers/firmware/{ => qcom}/qcom_scm.h (88%) > create mode 100644 drivers/firmware/qcom/qcom_tzmem.c > create mode 100644 drivers/firmware/qcom/qcom_tzmem.h > create mode 100644 include/linux/firmware/qcom/qcom_tzmem.h > > -- > 2.39.2 >
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> This is pretty much another full rewrite of the SHM Bridge support series. After more on- and off-list discussions I think this time it will be close to the final thing though. We've established the need for using separate pools for SCM and QSEECOM as well as the upcoming scminvoke driver. It's also become clear that in order to be future-proof, the new allocator must be an abstraction layer of a higher level as the SHM Bridge will not be the only memory protection mechanism that we'll see upstream. Hence the rename to TrustZone Memory rather than SCM Memory allocator. Also to that end: the new allocator is its own module now and provides a Kconfig choice menu for selecting the mode of operation (currently default and SHM Bridge). Due to a high divergence from v2, I dropped all tags except for patch 1/15 which didn't change. Tested on sm8550 and sa8775p with the Inline Crypto Engine and remoteproc. v3 -> v4: - include linux/sizes.h for SZ_X macros - use dedicated RCU APIs to dereference radix tree slots - fix kerneldocs - fix the comment in patch 14/15: it's the hypervisor, not the TrustZone that creates the SHM bridge v2 -> v3: - restore pool management and use separate pools for different users - don't use the new allocator in qcom_scm_pas_init_image() as the TrustZone will create an SHM bridge for us here - rewrite the entire series again for most part v1 -> v2: - too many changes to list, it's a complete rewrite as explained above Bartosz Golaszewski (15): firmware: qcom: move Qualcomm code into its own directory firmware: qcom: scm: add a missing forward declaration for struct device firmware: qcom: scm: remove unneeded 'extern' specifiers firmware: qcom: add a dedicated TrustZone buffer allocator firmware: qcom: scm: enable the TZ mem allocator firmware: qcom: scm: smc: switch to using the SCM allocator firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ allocator firmware: qcom: qseecom: convert to using the TZ allocator firmware: qcom: scm: add support for SHM bridge operations firmware: qcom: tzmem: enable SHM Bridge support firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image() arm64: defconfig: enable SHM Bridge support for the TZ memory allocator MAINTAINERS | 4 +- arch/arm64/configs/defconfig | 1 + drivers/firmware/Kconfig | 48 +-- drivers/firmware/Makefile | 5 +- drivers/firmware/qcom/Kconfig | 86 +++++ drivers/firmware/qcom/Makefile | 10 + drivers/firmware/{ => qcom}/qcom_qseecom.c | 0 .../{ => qcom}/qcom_qseecom_uefisecapp.c | 261 +++++-------- drivers/firmware/{ => qcom}/qcom_scm-legacy.c | 0 drivers/firmware/{ => qcom}/qcom_scm-smc.c | 28 +- drivers/firmware/{ => qcom}/qcom_scm.c | 179 +++++---- drivers/firmware/{ => qcom}/qcom_scm.h | 21 +- drivers/firmware/qcom/qcom_tzmem.c | 365 ++++++++++++++++++ drivers/firmware/qcom/qcom_tzmem.h | 13 + include/linux/firmware/qcom/qcom_qseecom.h | 4 +- include/linux/firmware/qcom/qcom_scm.h | 6 + include/linux/firmware/qcom/qcom_tzmem.h | 28 ++ 17 files changed, 746 insertions(+), 313 deletions(-) create mode 100644 drivers/firmware/qcom/Kconfig create mode 100644 drivers/firmware/qcom/Makefile rename drivers/firmware/{ => qcom}/qcom_qseecom.c (100%) rename drivers/firmware/{ => qcom}/qcom_qseecom_uefisecapp.c (84%) rename drivers/firmware/{ => qcom}/qcom_scm-legacy.c (100%) rename drivers/firmware/{ => qcom}/qcom_scm-smc.c (91%) rename drivers/firmware/{ => qcom}/qcom_scm.c (93%) rename drivers/firmware/{ => qcom}/qcom_scm.h (88%) create mode 100644 drivers/firmware/qcom/qcom_tzmem.c create mode 100644 drivers/firmware/qcom/qcom_tzmem.h create mode 100644 include/linux/firmware/qcom/qcom_tzmem.h