mbox series

[0/3] Add PPG support for PMI632 LPG dtsi

Message ID 20240205-pmi632-ppg-v1-0-e236c95a2099@fairphone.com (mailing list archive)
Headers show
Series Add PPG support for PMI632 LPG dtsi | expand

Message

Luca Weiss Feb. 5, 2024, 9:51 a.m. UTC 
Hook up the PBS & SDAM to the PMI632 LPG so that we can use the
hw_pattern for the LEDs.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
Luca Weiss (3):
      dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
      arm64: dts: qcom: pmi632: Add PBS client and use in LPG node
      arm64: defconfig: Enable QCOM PBS

 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 4 ++++
 arch/arm64/boot/dts/qcom/pmi632.dtsi                      | 9 +++++++++
 arch/arm64/configs/defconfig                              | 1 +
 3 files changed, 14 insertions(+)
---
base-commit: 1f790ac9c84028d89ef4dbb28ecc5771fc352e25
change-id: 20240117-pmi632-ppg-f1efb4318722

Best regards,

Comments

Bjorn Andersson Feb. 16, 2024, 11:10 p.m. UTC | #1 
On Mon, 05 Feb 2024 10:51:37 +0100, Luca Weiss wrote:
> Hook up the PBS & SDAM to the PMI632 LPG so that we can use the
> hw_pattern for the LEDs.
> 
> 

Applied, thanks!

[3/3] arm64: defconfig: Enable QCOM PBS
      commit: 9c5c14c066f353ac1f4e3b4dd6e19451eac61e0c

Best regards,