| Message ID | 20240326-archer-ax55-v1-v4-0-dc5b54a4bb00@gmail.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | arm64: add minimal boot support for TP-Link Archer AX55 v1 | expand |
On Tue, 26 Mar 2024 15:52:26 +0100, Gabor Juhos wrote: > The purpose of this series to add minimal boot support for the > TP-Link Archer AX55 v1 dual-band wireless router. > > There are two patches: > - the first one adds the compatible for the board into the dt-bindings > documentation, > - the second patch introduces a minimal device tree source which can be > used for booting initramfs images > > --- > Changes in v4: > - change patch 2/2 to use new LED_FUNCTION_* definitions introduced > in v6.9-rc1 > - rebase on top of v6.9-rc1 > - Link to v3: https://lore.kernel.org/r/20240313-archer-ax55-v1-v3-0-cd9402efab59@gmail.com > > Changes in v3: > - change pin configuration to use "gpio20" and "gpio21" for UART pins > in patch 2/2 > - rebase on top of v6.8 > - Link to v2: https://lore.kernel.org/r/20240226-archer-ax55-v1-v2-0-3776eb61f432@gmail.com > > Changes in v2: > - reorder pin configuration properties in patch 2/2 > - add 'Acked-by' tag to patch 1/2 > - Link to v1: https://lore.kernel.org/r/20240223-archer-ax55-v1-v1-0-99f8fa2c3858@gmail.com > > --- > Gabor Juhos (2): > dt-bindings: arm: qcom: add TP-Link Archer AX55 v1 > arm64: dts: qcom: add TP-Link Archer AX55 v1 > > Documentation/devicetree/bindings/arm/qcom.yaml | 1 + > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../dts/qcom/ipq5018-tplink-archer-ax55-v1.dts | 128 +++++++++++++++++++++ > 3 files changed, 130 insertions(+) > --- > base-commit: b55a22fa35e9d4e07d3ee6ab2557a41c2711433b > change-id: 20240221-archer-ax55-v1-73ed91a97c6e > > Best regards, > -- > Gabor Juhos <j4g8y7@gmail.com> > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y qcom/ipq5018-tplink-archer-ax55-v1.dtb' for 20240326-archer-ax55-v1-v4-0-dc5b54a4bb00@gmail.com: arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@8af8800: interrupts: [[0, 62, 4]] is too short from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml# arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@8af8800: interrupt-names: ['hs_phy_irq'] is too short from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml# arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@8af8800: interrupts: [[0, 62, 4]] is too short from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml# arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@8af8800: interrupt-names:0: 'pwr_event' was expected from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml# arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@8af8800: interrupt-names: ['hs_phy_irq'] is too short from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
On Tue, 26 Mar 2024 15:52:26 +0100, Gabor Juhos wrote: > The purpose of this series to add minimal boot support for the > TP-Link Archer AX55 v1 dual-band wireless router. > > There are two patches: > - the first one adds the compatible for the board into the dt-bindings > documentation, > - the second patch introduces a minimal device tree source which can be > used for booting initramfs images > > [...] Applied, thanks! [1/2] dt-bindings: arm: qcom: add TP-Link Archer AX55 v1 commit: 5c59666c443d730991ddbe46b098dc473cf56a55 [2/2] arm64: dts: qcom: add TP-Link Archer AX55 v1 commit: e6d33c8b2f8063e1f195cfc0e7f1c9e21066d13b Best regards,
The purpose of this series to add minimal boot support for the TP-Link Archer AX55 v1 dual-band wireless router. There are two patches: - the first one adds the compatible for the board into the dt-bindings documentation, - the second patch introduces a minimal device tree source which can be used for booting initramfs images --- Changes in v4: - change patch 2/2 to use new LED_FUNCTION_* definitions introduced in v6.9-rc1 - rebase on top of v6.9-rc1 - Link to v3: https://lore.kernel.org/r/20240313-archer-ax55-v1-v3-0-cd9402efab59@gmail.com Changes in v3: - change pin configuration to use "gpio20" and "gpio21" for UART pins in patch 2/2 - rebase on top of v6.8 - Link to v2: https://lore.kernel.org/r/20240226-archer-ax55-v1-v2-0-3776eb61f432@gmail.com Changes in v2: - reorder pin configuration properties in patch 2/2 - add 'Acked-by' tag to patch 1/2 - Link to v1: https://lore.kernel.org/r/20240223-archer-ax55-v1-v1-0-99f8fa2c3858@gmail.com --- Gabor Juhos (2): dt-bindings: arm: qcom: add TP-Link Archer AX55 v1 arm64: dts: qcom: add TP-Link Archer AX55 v1 Documentation/devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../dts/qcom/ipq5018-tplink-archer-ax55-v1.dts | 128 +++++++++++++++++++++ 3 files changed, 130 insertions(+) --- base-commit: b55a22fa35e9d4e07d3ee6ab2557a41c2711433b change-id: 20240221-archer-ax55-v1-73ed91a97c6e Best regards,