mbox series

[v4,0/3] arm64: qcom-sm8[456]50: properly describe the PCIe Gen4x2 PHY AUX clock

Message ID 20240422-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v4-0-868b15a17a45@linaro.org (mailing list archive)
Headers show
Series arm64: qcom-sm8[456]50: properly describe the PCIe Gen4x2 PHY AUX clock | expand

Message

Neil Armstrong April 22, 2024, 4:16 p.m. UTC 
The PCIe Gen4x2 PHY found in the SM8[456]50 SoCs have a second clock named
"PHY_AUX_CLK" which is an input of the Global Clock Controller (GCC) which
is muxed & gated then returned to the PHY as an input.

Document the clock IDs to select the PIPE clock or the AUX clock,
also enforce a second clock-output-names and a #clock-cells value of 1
for the PCIe Gen4x2 PHY found in the SM8[456]50 SoCs.

The PHY driver needs a light refactoring to support a second clock,
and finally the DT is changed to connect the PHY second clock to the
corresponding GCC input then drop the dummy fixed rate clock.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v4:
- Fixed dtbs check error on sm8550-qrd.dtb after rebase on -next
- Link to v3: https://lore.kernel.org/r/20240422-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v3-0-799475a27cce@linaro.org

Changes in v3:
- Rebased on linux-next, applies now cleanly
- Link to v2: https://lore.kernel.org/r/20240322-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v2-0-3ec0a966d52f@linaro.org

Changes in v2:
- Collected review tags
- Switched back to of_clk_add_hw_provider/devm_add_action_or_reset to maintain compatibility
- Tried to use generic of_clk_hw_onecell_get() but it requires to much boilerplate code
  and would still need a local qmp_pcie_clk_hw_get() to support the current #clock-cells=0
  when exposing 2 clocks, so it's simpler to just return the clocks in qmp_pcie_clk_hw_get()
- Link to v1: https://lore.kernel.org/r/20240319-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v1-0-926d7a4ccd80@linaro.org

---
Neil Armstrong (3):
      arm64: dts: qcom: sm8450: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk
      arm64: dts: qcom: sm8550: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk
      arm64: dts: qcom: sm8650: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk

 arch/arm64/boot/dts/qcom/sm8450.dtsi    |  8 ++++----
 arch/arm64/boot/dts/qcom/sm8550-hdk.dts |  4 ----
 arch/arm64/boot/dts/qcom/sm8550-mtp.dts |  4 ----
 arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 19 -------------------
 arch/arm64/boot/dts/qcom/sm8550.dtsi    | 13 ++++---------
 arch/arm64/boot/dts/qcom/sm8650-mtp.dts |  4 ----
 arch/arm64/boot/dts/qcom/sm8650-qrd.dts |  4 ----
 arch/arm64/boot/dts/qcom/sm8650.dtsi    | 13 ++++---------
 8 files changed, 12 insertions(+), 57 deletions(-)
---
base-commit: f529a6d274b3b8c75899e949649d231298f30a32
change-id: 20240319-topic-sm8x50-upstream-pcie-1-phy-aux-clk-4b35169707dd

Best regards,