mbox series

[v2,0/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver

Message ID 20240830-nxp-ptn3222-v2-0-4c6d8535cf6c@linaro.org (mailing list archive)
Headers show
Series phy: add NXP PTN3222 eUSB2 to USB2 redriver | expand

Message

Dmitry Baryshkov Aug. 30, 2024, 8:20 a.m. UTC 
The NXP PTN3222 is the single-port eUSB2 to USB2 redriver that performs
translation between eUSB2 and USB2 signalling schemes. It supports all
three data rates: Low Speed, Full Speed and High Speed.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Changes in v2:
- Switched to devm_regulator_bulk_get_const() (Neil)
- Link to v1: https://lore.kernel.org/r/20240829-nxp-ptn3222-v1-0-46906bc4747a@linaro.org

---
Dmitry Baryshkov (2):
      dt-bindings: phy: add NXP PTN3222 eUSB2 to USB2 redriver
      phy: add NXP PTN3222 eUSB2 to USB2 redriver

 .../devicetree/bindings/phy/nxp,ptn3222.yaml       |  55 +++++++++
 drivers/phy/Kconfig                                |  11 ++
 drivers/phy/Makefile                               |   1 +
 drivers/phy/phy-nxp-ptn3222.c                      | 123 +++++++++++++++++++++
 4 files changed, 190 insertions(+)
---
base-commit: 195a402a75791e6e0d96d9da27ca77671bc656a8
change-id: 20240829-nxp-ptn3222-30bbb81e984e

Best regards,

Comments

Vinod Koul Oct. 17, 2024, 3:36 p.m. UTC | #1 
On Fri, 30 Aug 2024 11:20:44 +0300, Dmitry Baryshkov wrote:
> The NXP PTN3222 is the single-port eUSB2 to USB2 redriver that performs
> translation between eUSB2 and USB2 signalling schemes. It supports all
> three data rates: Low Speed, Full Speed and High Speed.
> 
> 

Applied, thanks!

[1/2] dt-bindings: phy: add NXP PTN3222 eUSB2 to USB2 redriver
      commit: 2df490e7374de8e940d353cfcafd3c91242841ea
[2/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver
      commit: c9be539e11f0bf1665c03108d3b7881a5d67ae48

Best regards,