mbox series

[0/2] Add support for DisplayPort on the QCS615 RIDE platform

Message ID 20241210-add-displayport-support-to-qcs615-devicetree-v1-0-02f84a92c44b@quicinc.com (mailing list archive)
Headers show
Series Add support for DisplayPort on the QCS615 RIDE platform | expand

Message

Xiangxu Yin Dec. 10, 2024, 9:11 a.m. UTC
The patches include:
1.ADD DisplayPort controller and phy nodes to Qualcomm QCS615 dtsi file.
2.Add dp-connector, config hpd-gpios which used for Displayport hotplug detect.
3.Config lane mapping through data-lanes prop.

This patch series depends on below patch series:
- dispcc
https://lore.kernel.org/all/20241108-qcs615-mm-clockcontroller-v3-0-7d3b2d235fdf@quicinc.com/
- dispcc dts
https://lore.kernel.org/lkml/20241108-qcs615-mm-dt-nodes-v1-0-b2669cac0624@quicinc.com/
- display
https://lore.kernel.org/all/20241122-add-display-support-for-qcs615-platform-v3-0-35252e3a51fe@quicinc.com/
- displayport driver
https://lore.kernel.org/all/20241129-add-displayport-support-for-qcs615-platform-v1-0-09a4338d93ef@quicinc.com/

Signed-off-by: Xiangxu Yin <quic_xiangxuy@quicinc.com>

---
Xiangxu Yin (2):
      arm64: dts: qcom: Add DisplayPort support for QCS615
      arm64: dts: qcom: Enable DisplayPort on QCS615 RIDE platform

 arch/arm64/boot/dts/qcom/qcs615-ride.dts |  30 +++++++++
 arch/arm64/boot/dts/qcom/qcs615.dtsi     | 107 ++++++++++++++++++++++++++++++-
 2 files changed, 135 insertions(+), 2 deletions(-)
---
base-commit: 68586ffc0ad47448d0c00a72ba61db66b127c23a
change-id: 20241210-add-displayport-support-to-qcs615-devicetree-1575aa4e299d

Best regards,

Comments

Dmitry Baryshkov Dec. 10, 2024, 10:03 a.m. UTC | #1
On Tue, Dec 10, 2024 at 05:11:04PM +0800, Xiangxu Yin wrote:
> The patches include:
> 1.ADD DisplayPort controller and phy nodes to Qualcomm QCS615 dtsi file.
> 2.Add dp-connector, config hpd-gpios which used for Displayport hotplug detect.
> 3.Config lane mapping through data-lanes prop.
> 
> This patch series depends on below patch series:
> - dispcc
> https://lore.kernel.org/all/20241108-qcs615-mm-clockcontroller-v3-0-7d3b2d235fdf@quicinc.com/
> - dispcc dts
> https://lore.kernel.org/lkml/20241108-qcs615-mm-dt-nodes-v1-0-b2669cac0624@quicinc.com/
> - display
> https://lore.kernel.org/all/20241122-add-display-support-for-qcs615-platform-v3-0-35252e3a51fe@quicinc.com/


> - displayport driver
> https://lore.kernel.org/all/20241129-add-displayport-support-for-qcs615-platform-v1-0-09a4338d93ef@quicinc.com/

No, it doesn't. The DT and the driver can come up separately.

> 
> Signed-off-by: Xiangxu Yin <quic_xiangxuy@quicinc.com>
> 
> ---
> Xiangxu Yin (2):
>       arm64: dts: qcom: Add DisplayPort support for QCS615
>       arm64: dts: qcom: Enable DisplayPort on QCS615 RIDE platform
> 
>  arch/arm64/boot/dts/qcom/qcs615-ride.dts |  30 +++++++++
>  arch/arm64/boot/dts/qcom/qcs615.dtsi     | 107 ++++++++++++++++++++++++++++++-
>  2 files changed, 135 insertions(+), 2 deletions(-)
> ---
> base-commit: 68586ffc0ad47448d0c00a72ba61db66b127c23a
> change-id: 20241210-add-displayport-support-to-qcs615-devicetree-1575aa4e299d
> 
> Best regards,
> -- 
> xiangxuy <quic_xiangxuy@quicinc.com>
>