[v4,0/6] Enable IPQ5332 USB2

Message

Varadarajan Narayanan July 12, 2023, 11:38 a.m. UTC

This patch series adds the relevant phy and controller
configurations for enabling USB2 on IPQ5332

v4:
	Binding and dts:-
		Change node name (bindings & dts)
	Driver:-
		Remove unused enum
		static const for '.data'
		Error handling for devm_clk_get
v3:
	Fix bindings file based on review comments

v1:
	Cleanup DTS
	Combine driver, kconfig and makefile patches
	Remove unused functions from M31 driver
	Drop the clock driver changes

Varadarajan Narayanan (6):
  dt-bindings: usb: dwc3: Add IPQ5332 compatible
  dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  phy: qcom-m31: Introduce qcom,m31 USB phy driver
  arm64: dts: qcom: ipq5332: Add USB related nodes
  arm64: dts: qcom: ipq5332: Enable USB
  arm64: defconfig: Enable M31 USB phy driver

 .../bindings/phy/qcom,ipq5332-usb-hsphy.yaml       |  48 ++++
 .../devicetree/bindings/usb/qcom,dwc3.yaml         |   3 +
 arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts        |  12 +
 arch/arm64/boot/dts/qcom/ipq5332.dtsi              |  53 +++++
 arch/arm64/configs/defconfig                       |   1 +
 drivers/phy/qualcomm/Kconfig                       |  11 +
 drivers/phy/qualcomm/Makefile                      |   1 +
 drivers/phy/qualcomm/phy-qcom-m31.c                | 256 +++++++++++++++++++++
 8 files changed, 385 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-hsphy.yaml
 create mode 100644 drivers/phy/qualcomm/phy-qcom-m31.c