Show patches with: Submitter = Doug Anderson       |    Archived = No       |   783 patches
« 1 2 ... 5 6 7 8 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2,2/3] Revert "i2c: i2c-qcom-geni: Fix DMA transfer race" i2c: i2c-qcom-geni: More properly fix the DMA race - 2 1 --- 2020-10-13 Doug Anderson Accepted
[v2,1/3] soc: qcom: geni: More properly switch to DMA mode i2c: i2c-qcom-geni: More properly fix the DMA race - 2 1 --- 2020-10-13 Doug Anderson Accepted
[3/3] soc: qcom: geni: Optimize select fifo/dma mode i2c: i2c-qcom-geni: More properly fix the DMA race - - - --- 2020-10-08 Doug Anderson Superseded
[2/3] Revert "i2c: i2c-qcom-geni: Fix DMA transfer race" i2c: i2c-qcom-geni: More properly fix the DMA race - 2 - --- 2020-10-08 Doug Anderson Superseded
[1/3] soc: qcom: geni: More properly switch to DMA mode i2c: i2c-qcom-geni: More properly fix the DMA race - 2 - --- 2020-10-08 Doug Anderson Superseded
arm64: dts: qcom: sc7180: Fix one forgotten interconnect reference arm64: dts: qcom: sc7180: Fix one forgotten interconnect reference - 1 - --- 2020-10-01 Doug Anderson Accepted
[v3,2/2] arm64: dts: qcom: Switch sc7180-trogdor to control SPI CS via GPIO [v3,1/2] arm64: dts: qcom: sc7180: Provide pinconf for SPI to use GPIO for CS - 2 - --- 2020-09-21 Doug Anderson Accepted
[v3,1/2] arm64: dts: qcom: sc7180: Provide pinconf for SPI to use GPIO for CS [v3,1/2] arm64: dts: qcom: sc7180: Provide pinconf for SPI to use GPIO for CS - 1 - --- 2020-09-21 Doug Anderson Accepted
[v2,1/2] arm64: dts: qcom: sc7180: Provide pinconf for SPI to use GPIO for CS [v2,1/2] arm64: dts: qcom: sc7180: Provide pinconf for SPI to use GPIO for CS - 1 - --- 2020-09-19 Doug Anderson Superseded
spi: spi-geni-qcom: Don't wait to start 1st transfer if transmitting spi: spi-geni-qcom: Don't wait to start 1st transfer if transmitting - 2 - --- 2020-09-12 Doug Anderson Accepted
tty: serial: qcom_geni_serial: 115.2 is a better console default than 9600 tty: serial: qcom_geni_serial: 115.2 is a better console default than 9600 - 2 - --- 2020-09-11 Doug Anderson Accepted
arm64: dts: qcom: Add sc7180-lazor sku2 arm64: dts: qcom: Add sc7180-lazor sku2 - - - --- 2020-09-08 Doug Anderson Accepted
mmc: sdhci-msm: Prefer asynchronous probe mmc: sdhci-msm: Prefer asynchronous probe - - - --- 2020-09-02 Doug Anderson Accepted
mmc: sdhci-msm: Add retries when all tuning phases are found valid mmc: sdhci-msm: Add retries when all tuning phases are found valid 1 1 - --- 2020-08-27 Doug Anderson Accepted
serial: qcom_geni_serial: Fix recent kdb hang serial: qcom_geni_serial: Fix recent kdb hang - 1 - --- 2020-08-07 Doug Anderson Accepted
dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180 dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180 - - - --- 2020-07-31 Doug Anderson Accepted
soc: qcom-geni-se: Don't use relaxed writes when writing commands soc: qcom-geni-se: Don't use relaxed writes when writing commands - 3 - --- 2020-07-22 Doug Anderson Accepted
[v2] i2c: i2c-qcom-geni: Fix DMA transfer race [v2] i2c: i2c-qcom-geni: Fix DMA transfer race - 3 1 --- 2020-07-22 Doug Anderson Accepted
i2c: i2c-qcom-geni: Fix DMA transfer race i2c: i2c-qcom-geni: Fix DMA transfer race - 1 1 --- 2020-07-21 Doug Anderson Superseded
drm: panel: simple: Delay HPD checking on boe_nv133fhm_n61 for 15 ms drm: panel: simple: Delay HPD checking on boe_nv133fhm_n61 for 15 ms - 1 - --- 2020-07-16 Doug Anderson Accepted
[v3] pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180 [v3] pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180 - 1 - --- 2020-07-14 Doug Anderson Accepted
[v2] pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180 [v2] pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180 - - - --- 2020-07-13 Doug Anderson Superseded
[v2,2/2] ath10k: Get rid of "per_ce_irq" hw param [v2,1/2] ath10k: Keep track of which interrupts fired, don't poll them - - - --- 2020-07-09 Doug Anderson Accepted
[v2,1/2] ath10k: Keep track of which interrupts fired, don't poll them [v2,1/2] ath10k: Keep track of which interrupts fired, don't poll them - 2 - --- 2020-07-09 Doug Anderson Accepted
[v2,2/2] spi: spi-qcom-qspi: Set an autosuspend delay of 250 ms spi: spi-qcom-qspi: Avoid some per-transfer overhead 1 2 1 --- 2020-07-09 Doug Anderson Accepted
[v2,1/2] spi: spi-qcom-qspi: Avoid clock setting if not needed spi: spi-qcom-qspi: Avoid some per-transfer overhead 1 2 1 --- 2020-07-09 Doug Anderson Accepted
spi: spi-geni-qcom: Set the clock properly at runtime resume spi: spi-geni-qcom: Set the clock properly at runtime resume 1 - - --- 2020-07-08 Doug Anderson Superseded
[2/2] spi: spi-qcom-qspi: Set an autosuspend delay of 250 ms spi: spi-qcom-qspi: Avoid some per-transfer overhead 1 - - --- 2020-07-07 Doug Anderson Superseded
[1/2] spi: spi-qcom-qspi: Avoid clock setting if not needed spi: spi-qcom-qspi: Avoid some per-transfer overhead 1 - - --- 2020-07-07 Doug Anderson Superseded
ath10k: Keep track of which interrupts fired, don't poll them ath10k: Keep track of which interrupts fired, don't poll them - 2 - --- 2020-07-07 Doug Anderson Superseded
spi: Avoid setting the chip select if we don't need to spi: Avoid setting the chip select if we don't need to - - - --- 2020-06-29 Doug Anderson Accepted
spi: spi-geni-qcom: Don't set the cs if it was already right spi: spi-geni-qcom: Don't set the cs if it was already right - - - --- 2020-06-26 Doug Anderson Accepted
[2/2] serial: qcom_geni_serial: Always use 4 bytes per TX FIFO word serial: qcom_geni_serial: Use the FIFOs properly for console - 1 - --- 2020-06-26 Doug Anderson Accepted
[1/2] serial: qcom_geni_serial: Make kgdb work even if UART isn't console serial: qcom_geni_serial: Use the FIFOs properly for console - 1 - --- 2020-06-26 Doug Anderson Accepted
[REPOST] arm64: dts: qcom: Fix WiFi supplies on sc7180-idp [REPOST] arm64: dts: qcom: Fix WiFi supplies on sc7180-idp - 1 1 --- 2020-06-25 Doug Anderson Accepted
arm64: dts: qcom: Fix WiFi supplies on sc7180-idp arm64: dts: qcom: Fix WiFi supplies on sc7180-idp - - - --- 2020-06-25 Doug Anderson Superseded
[v4,4/4] arm64: dts: qcom: sc7180: Add properties to qfprom for fuse blowing nvmem: qfprom: Patches for fuse blowing on Qualcomm SoCs - - - --- 2020-06-22 Doug Anderson Superseded
[v4,3/4] nvmem: qfprom: Add fuse blowing support nvmem: qfprom: Patches for fuse blowing on Qualcomm SoCs - - - --- 2020-06-22 Doug Anderson Superseded
[v4,2/4] dt-bindings: nvmem: Add properties needed for blowing fuses nvmem: qfprom: Patches for fuse blowing on Qualcomm SoCs - 1 - --- 2020-06-22 Doug Anderson Superseded
[v4,1/4] dt-bindings: nvmem: qfprom: Convert to yaml nvmem: qfprom: Patches for fuse blowing on Qualcomm SoCs - 1 - --- 2020-06-22 Doug Anderson Superseded
[v3,4/4] arm64: dts: qcom: sc7180: Add properties to qfprom for fuse blowing nvmem: qfprom: Patches for fuse blowing on Qualcomm SoCs - - - --- 2020-06-17 Doug Anderson Superseded
[v3,3/4] nvmem: qfprom: Add fuse blowing support nvmem: qfprom: Patches for fuse blowing on Qualcomm SoCs - - - --- 2020-06-17 Doug Anderson Superseded
[v3,2/4] dt-bindings: nvmem: Add properties needed for blowing fuses nvmem: qfprom: Patches for fuse blowing on Qualcomm SoCs - - - --- 2020-06-17 Doug Anderson Superseded
[v3,1/4] dt-bindings: nvmem: qfprom: Convert to yaml nvmem: qfprom: Patches for fuse blowing on Qualcomm SoCs - - - --- 2020-06-17 Doug Anderson Superseded
[v3,5/5] spi: spi-geni-qcom: Don't keep a local state variable spi: spi-geni-qcom: Fixes / perf improvements - - - --- 2020-06-16 Doug Anderson Superseded
[v3,4/5] spi: spi-geni-qcom: Actually use our FIFO spi: spi-geni-qcom: Fixes / perf improvements - 1 - --- 2020-06-16 Doug Anderson Superseded
[v3,3/5] spi: spi-geni-qcom: Check for error IRQs spi: spi-geni-qcom: Fixes / perf improvements - 1 - --- 2020-06-16 Doug Anderson Superseded
[v3,2/5] spi: spi-geni-qcom: Mo' betta locking spi: spi-geni-qcom: Fixes / perf improvements - - - --- 2020-06-16 Doug Anderson Superseded
[v3,1/5] spi: spi-geni-qcom: No need for irqsave variant of spinlock calls spi: spi-geni-qcom: Fixes / perf improvements - 1 - --- 2020-06-16 Doug Anderson Superseded
ath10k: Wait until copy complete is actually done before completing ath10k: Wait until copy complete is actually done before completing - 1 - --- 2020-06-09 Doug Anderson Accepted
soc: qcom: rpmh-rsc: Don't use ktime for timeout in write_tcs_reg_sync() soc: qcom: rpmh-rsc: Don't use ktime for timeout in write_tcs_reg_sync() - 2 - --- 2020-05-28 Doug Anderson Accepted
[REPOST,v2] drm/bridge: ti-sn65dsi86: Implement lane reordering + polarity [REPOST,v2] drm/bridge: ti-sn65dsi86: Implement lane reordering + polarity - 2 - --- 2020-05-18 Doug Anderson Accepted
[v6,3/3] dt-bindings: drm/bridge: ti-sn65dsi86: Document no-hpd drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 4 - --- 2020-05-13 Doug Anderson Accepted
[v6,2/3] dt-bindings: drm/bridge: ti-sn65dsi86: Convert to yaml drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 2 - --- 2020-05-13 Doug Anderson Accepted
[v6,1/3] drm/bridge: ti-sn65dsi86: Export bridge GPIOs to Linux drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 3 - --- 2020-05-13 Doug Anderson Accepted
drm/bridge: ti-sn65dsi86: Clear old error bits before AUX transfers drm/bridge: ti-sn65dsi86: Clear old error bits before AUX transfers - 1 - --- 2020-05-08 Doug Anderson Accepted
[3/3] panel: simple: Add BOE NV133FHM-N62 [1/3] panel: simple: Fix size and bpp of BOE NV133FHM-N61 - - - --- 2020-05-08 Doug Anderson Accepted
[2/3] dt-bindings: display: simple: Add BOE NV133FHM-N62 [1/3] panel: simple: Fix size and bpp of BOE NV133FHM-N61 - - - --- 2020-05-08 Doug Anderson Accepted
[1/3] panel: simple: Fix size and bpp of BOE NV133FHM-N61 [1/3] panel: simple: Fix size and bpp of BOE NV133FHM-N61 - - - --- 2020-05-08 Doug Anderson Accepted
[v5,6/6] arm64: dts: sdm845: Add "no-hpd" to sn65dsi86 on cheza drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 1 - --- 2020-05-07 Doug Anderson Superseded
[v5,5/6] dt-bindings: drm/bridge: ti-sn65dsi86: Document no-hpd drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 3 - --- 2020-05-07 Doug Anderson Superseded
[v5,4/6] dt-bindings: drm/bridge: ti-sn65dsi86: Convert to yaml drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 1 - --- 2020-05-07 Doug Anderson Superseded
[v5,3/6] drm/panel-simple: Support hpd-gpios for delaying prepare() drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 2 - --- 2020-05-07 Doug Anderson Superseded
[v5,2/6] dt-bindings: display: Add hpd-gpios to panel-common bindings drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 3 - --- 2020-05-07 Doug Anderson Superseded
[v5,1/6] drm/bridge: ti-sn65dsi86: Export bridge GPIOs to Linux drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 3 - --- 2020-05-07 Doug Anderson Superseded
[v2,2/2] dt-bindings: drm/bridge: ti-sn65dsi86: Improve the yaml validation [v2,1/2] drm/bridge: ti-sn65dsi86: Implement lane reordering + polarity - - - --- 2020-05-06 Doug Anderson Superseded
[v2,1/2] drm/bridge: ti-sn65dsi86: Implement lane reordering + polarity [v2,1/2] drm/bridge: ti-sn65dsi86: Implement lane reordering + polarity - 2 - --- 2020-05-06 Doug Anderson Superseded
drm/bridge: ti-sn65dsi86: Implement lane reordering + polarity drm/bridge: ti-sn65dsi86: Implement lane reordering + polarity - 1 - --- 2020-05-05 Doug Anderson Superseded
drm/bridge: ti-sn65dsi86: Fix off-by-one error in clock choice drm/bridge: ti-sn65dsi86: Fix off-by-one error in clock choice - 2 - --- 2020-05-05 Doug Anderson Accepted
[v4,6/6] arm64: dts: sdm845: Add "no-hpd" to sn65dsi86 on cheza drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 1 - --- 2020-04-30 Doug Anderson Superseded
[v4,5/6] dt-bindings: drm/bridge: ti-sn65dsi86: Document no-hpd drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 3 - --- 2020-04-30 Doug Anderson Superseded
[v4,4/6] dt-bindings: drm/bridge: ti-sn65dsi86: Convert to yaml drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 2 - --- 2020-04-30 Doug Anderson Superseded
[v4,3/6] drm/panel-simple: Support hpd-gpios for delaying prepare() drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 2 - --- 2020-04-30 Doug Anderson Superseded
[v4,2/6] dt-bindings: display: Add hpd-gpios to panel-common bindings drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 3 - --- 2020-04-30 Doug Anderson Superseded
[v4,1/6] drm/bridge: ti-sn65dsi86: Export bridge GPIOs to Linux drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 1 - --- 2020-04-30 Doug Anderson Superseded
dt-bindings: phy: qcom-qusb2: Fix defaults dt-bindings: phy: qcom-qusb2: Fix defaults - 1 - --- 2020-04-23 Doug Anderson Accepted
[v3,6/6] arm64: dts: sdm845: Add "no-hpd" to sn65dsi86 on cheza drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 1 - --- 2020-04-23 Doug Anderson Superseded
[v3,5/6] dt-bindings: drm/bridge: ti-sn65dsi86: Document no-hpd drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 2 - --- 2020-04-23 Doug Anderson Superseded
[v3,4/6] dt-bindings: drm/bridge: ti-sn65dsi86: Convert to yaml drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 1 - --- 2020-04-23 Doug Anderson Superseded
[v3,3/6] drm/panel-simple: Support hpd-gpios for delaying prepare() drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 2 - --- 2020-04-23 Doug Anderson Superseded
[v3,2/6] dt-bindings: display: Add hpd-gpios to panel-common bindings drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 2 - --- 2020-04-23 Doug Anderson Superseded
[v3,1/6] drm/bridge: ti-sn65dsi86: Export bridge GPIOs to Linux drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 1 - --- 2020-04-23 Doug Anderson Superseded
[v2,6/6] arm64: dts: sdm845: Add "no-hpd" to sn65dsi86 on cheza drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 1 - --- 2020-04-21 Doug Anderson Superseded
[v2,5/6] dt-bindings: drm/bridge: ti-sn65dsi86: Document no-hpd drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 1 - --- 2020-04-21 Doug Anderson Superseded
[v2,4/6] dt-bindings: drm/bridge: ti-sn65dsi86: Convert to yaml drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - - - --- 2020-04-21 Doug Anderson Superseded
[v2,3/6] drm/panel-simple: Support hpd-gpios for delaying prepare() drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 1 - --- 2020-04-21 Doug Anderson Superseded
[v2,2/6] dt-bindings: display: Add hpd-gpios to panel-common bindings drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - 1 - --- 2020-04-21 Doug Anderson Superseded
[v2,1/6] drm/bridge: ti-sn65dsi86: Export bridge GPIOs to Linux drm: Prepare to use a GPIO on ti-sn65dsi86 for Hot Plug Detect - - - --- 2020-04-21 Doug Anderson Superseded
soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner - 2 - --- 2020-04-17 Doug Anderson Accepted
[v3,2/2] soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync() [v3,1/2] soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation - 1 - --- 2020-04-15 Doug Anderson Accepted
[v3,1/2] soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation [v3,1/2] soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation - 1 - --- 2020-04-15 Doug Anderson Accepted
[v2,2/2] soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync() [v2,1/2] soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation - 1 - --- 2020-04-14 Doug Anderson Superseded
[v2,1/2] soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation [v2,1/2] soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation - 1 - --- 2020-04-14 Doug Anderson Superseded
soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation - - - --- 2020-04-14 Doug Anderson Superseded
mmc: cqhci: Avoid false "cqhci: CQE stuck on" by not open-coding timeout loop mmc: cqhci: Avoid false "cqhci: CQE stuck on" by not open-coding timeout loop 1 - - --- 2020-04-13 Doug Anderson Accepted
[v3,10/10] drivers: qcom: rpmh-rsc: read_tcs_reg()/write_tcs_reg() are not for IRQ drivers: qcom: rpmh-rsc: Cleanup / add lots of comments - 1 1 --- 2020-04-07 Doug Anderson Superseded
[v3,09/10] drivers: qcom: rpmh-rsc: Caller handles tcs_invalidate() exclusivity drivers: qcom: rpmh-rsc: Cleanup / add lots of comments - 1 1 --- 2020-04-07 Doug Anderson Superseded
[v3,08/10] drivers: qcom: rpmh-rsc: Don't double-check rpmh drivers: qcom: rpmh-rsc: Cleanup / add lots of comments - 1 1 --- 2020-04-07 Doug Anderson Superseded
[v3,07/10] drivers: qcom: rpmh-rsc: tcs_is_free() can just check tcs_in_use drivers: qcom: rpmh-rsc: Cleanup / add lots of comments - 1 1 --- 2020-04-07 Doug Anderson Superseded
[v3,06/10] drivers: qcom: rpmh-rsc: A lot of comments drivers: qcom: rpmh-rsc: Cleanup / add lots of comments - 1 - --- 2020-04-07 Doug Anderson Superseded
« 1 2 ... 5 6 7 8 »