new file mode 100644
@@ -0,0 +1,17 @@
+MSM Restart Driver
+
+A power supply hold (ps-hold) bit is set to power the msm chipsets.
+Clearing that bit allows us to restart/poweroff. The difference
+between poweroff and restart is determined by unique power manager IC
+settings.
+
+Required Properties:
+-compatible: "qcom,pshold"
+-reg: Specifies the physical address of the ps-hold register
+
+Example:
+
+ restart@fc4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0xfc4ab000 0x4>;
+ };
@@ -14,6 +14,12 @@ config POWER_RESET_GPIO
If your board needs a GPIO high/low to power down, say Y and
create a binding in your devicetree.
+config POWER_RESET_MSM
+ bool "Qualcomm MSM power-off driver"
+ depends on POWER_RESET && ARCH_MSM
+ help
+ Power off and restart support for Qualcomm boards.
+
config POWER_RESET_QNAP
bool "QNAP power-off driver"
depends on OF_GPIO && POWER_RESET && PLAT_ORION
@@ -1,4 +1,5 @@
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
+obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
new file mode 100644
@@ -0,0 +1,75 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+
+#include <asm/system_misc.h>
+
+static void __iomem *msm_ps_hold;
+
+static void do_msm_restart(enum reboot_mode reboot_mode, const char *cmd)
+{
+ writel(0, msm_ps_hold);
+ mdelay(10000);
+}
+
+static void do_msm_poweroff(void)
+{
+ /* TODO: Add poweroff capability */
+
+ do_msm_restart(REBOOT_HARD, NULL);
+}
+
+static int msm_restart_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *mem;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ msm_ps_hold = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(msm_ps_hold))
+ return PTR_ERR(msm_ps_hold);
+
+ pm_power_off = do_msm_poweroff;
+ arm_pm_restart = do_msm_restart;
+ return 0;
+}
+
+static const struct of_device_id of_msm_restart_match[] = {
+ { .compatible = "qcom,pshold", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_msm_restart_match);
+
+static struct platform_driver msm_restart_driver = {
+ .probe = msm_restart_probe,
+ .driver = {
+ .name = "msm-restart",
+ .of_match_table = of_match_ptr(of_msm_restart_match),
+ },
+};
+
+static int __init msm_restart_init(void)
+{
+ return platform_driver_register(&msm_restart_driver);
+}
+device_initcall(msm_restart_init);
Add support for restart and poweroff functionality present on MSM chipsets with the MPM2 ps-hold hardware. Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org> --- .../bindings/power_supply/msm-poweroff.txt | 17 +++++ drivers/power/reset/Kconfig | 6 ++ drivers/power/reset/Makefile | 1 + drivers/power/reset/msm-poweroff.c | 75 ++++++++++++++++++++++ 4 files changed, 99 insertions(+) create mode 100644 Documentation/devicetree/bindings/power_supply/msm-poweroff.txt create mode 100644 drivers/power/reset/msm-poweroff.c