@@ -2,4 +2,4 @@ config COMMON_CLK_QCOM
tristate "Support for Qualcomm's clock controllers"
depends on OF
select REGMAP_MMIO
-
+ select RESET_CONTROLLER
@@ -5,3 +5,4 @@ clk-qcom-$(CONFIG_COMMON_CLK_QCOM) += clk-pll.o
clk-qcom-$(CONFIG_COMMON_CLK_QCOM) += clk-rcg.o
clk-qcom-$(CONFIG_COMMON_CLK_QCOM) += clk-rcg2.o
clk-qcom-$(CONFIG_COMMON_CLK_QCOM) += clk-branch.o
+clk-qcom-$(CONFIG_COMMON_CLK_QCOM) += reset.o
new file mode 100644
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/export.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+#include <linux/delay.h>
+
+#include "reset.h"
+
+static int qcom_reset(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ rcdev->ops->assert(rcdev, id);
+ udelay(1);
+ rcdev->ops->deassert(rcdev, id);
+ return 0;
+}
+
+static int
+qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct qcom_reset_controller *rst;
+ const struct qcom_reset_map *map;
+ u32 mask;
+
+ rst = to_qcom_reset_controller(rcdev);
+ map = &rst->reset_map[id];
+ mask = BIT(map->bit);
+
+ return regmap_update_bits(rst->regmap, map->reg, mask, mask);
+}
+
+static int
+qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct qcom_reset_controller *rst;
+ const struct qcom_reset_map *map;
+ u32 mask;
+
+ rst = to_qcom_reset_controller(rcdev);
+ map = &rst->reset_map[id];
+ mask = BIT(map->bit);
+
+ return regmap_update_bits(rst->regmap, map->reg, mask, 0);
+}
+
+struct reset_control_ops qcom_reset_ops = {
+ .reset = qcom_reset,
+ .assert = qcom_reset_assert,
+ .deassert = qcom_reset_deassert,
+};
+EXPORT_SYMBOL_GPL(qcom_reset_ops);
new file mode 100644
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __QCOM_CLK_RESET_H__
+#define __QCOM_CLK_RESET_H__
+
+#include <linux/reset-controller.h>
+
+struct qcom_reset_map {
+ unsigned int reg;
+ u8 bit;
+};
+
+struct regmap;
+
+struct qcom_reset_controller {
+ const struct qcom_reset_map *reset_map;
+ struct regmap *regmap;
+ struct reset_controller_dev rcdev;
+};
+
+#define to_qcom_reset_controller(r) \
+ container_of(r, struct qcom_reset_controller, rcdev);
+
+extern struct reset_control_ops qcom_reset_ops;
+
+#endif
Reset controllers and clock controllers are combined into one IP block on Qualcomm chipsets. Usually a reset signal is associated with each clock branch but sometimes a reset signal is associated with a handful of clocks. Either way the register interface is the same; set a bit to assert a reset and clear a bit to deassert a reset. Add support for these types of resets signals. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> --- drivers/clk/qcom/Kconfig | 2 +- drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/reset.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/clk/qcom/reset.h | 37 ++++++++++++++++++++++++++++ 4 files changed, 102 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/qcom/reset.c create mode 100644 drivers/clk/qcom/reset.h