@@ -159,32 +159,6 @@ put_3p3:
return rc;
}
-#ifdef CONFIG_PM_SLEEP
-#define USB_PHY_SUSP_DIG_VOL 500000
-static int msm_hsusb_config_vddcx(int high)
-{
- int max_vol = USB_PHY_VDD_DIG_VOL_MAX;
- int min_vol;
- int ret;
-
- if (high)
- min_vol = USB_PHY_VDD_DIG_VOL_MIN;
- else
- min_vol = USB_PHY_SUSP_DIG_VOL;
-
- ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol);
- if (ret) {
- pr_err("%s: unable to set the voltage for regulator "
- "HSUSB_VDDCX\n", __func__);
- return ret;
- }
-
- pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol);
-
- return ret;
-}
-#endif
-
static int msm_hsusb_ldo_set_mode(int on)
{
int ret = 0;
@@ -440,7 +414,32 @@ static int msm_otg_reset(struct usb_phy *phy)
#define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000)
#define PHY_RESUME_TIMEOUT_USEC (100 * 1000)
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
+
+#define USB_PHY_SUSP_DIG_VOL 500000
+static int msm_hsusb_config_vddcx(int high)
+{
+ int max_vol = USB_PHY_VDD_DIG_VOL_MAX;
+ int min_vol;
+ int ret;
+
+ if (high)
+ min_vol = USB_PHY_VDD_DIG_VOL_MIN;
+ else
+ min_vol = USB_PHY_SUSP_DIG_VOL;
+
+ ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol);
+ if (ret) {
+ pr_err("%s: unable to set the voltage for regulator "
+ "HSUSB_VDDCX\n", __func__);
+ return ret;
+ }
+
+ pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol);
+
+ return ret;
+}
+
static int msm_otg_suspend(struct msm_otg *motg)
{
struct usb_phy *phy = &motg->phy;
@@ -1734,22 +1733,18 @@ static int msm_otg_pm_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM
static const struct dev_pm_ops msm_otg_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume)
SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume,
msm_otg_runtime_idle)
};
-#endif
static struct platform_driver msm_otg_driver = {
.remove = msm_otg_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
-#ifdef CONFIG_PM
.pm = &msm_otg_dev_pm_ops,
-#endif
},
};
Both the PM_RUNTIME and PM_SLEEP callbacks call into the common msm_otg_{suspend,resume} routines, however these routines are only being built when CONFIG_PM_SLEEP. In addition, msm_otg_{suspend,resume} also depends on msm_hsusb_config_vddcx(), which is only built when CONFIG_PM_SLEEP. Fix the CONFIG_PM_RUNTIME, !CONFIG_PM_SLEEP case by changing the preprocessor conditional, and moving msm_hsusb_config_vddcx(). While we're here, eliminate the CONFIG_PM conditional for setting up the dev_pm_ops. This address the following errors Russell King has hit doing randconfig builds: drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_suspend': drivers/usb/phy/phy-msm-usb.c:1691:2: error: implicit declaration of function 'msm_otg_suspend' drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_resume': drivers/usb/phy/phy-msm-usb.c:1699:2: error: implicit declaration of function 'msm_otg_resume' Cc: Ivan T. Ivanov <iivanov@mm-sol.com> Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Josh Cartwright <joshc@codeaurora.org> --- drivers/usb/phy/phy-msm-usb.c | 57 ++++++++++++++++++++----------------------- 1 file changed, 26 insertions(+), 31 deletions(-)