@@ -291,9 +291,11 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
dra7-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
-dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb \
- qcom-apq8074-dragonboard.dtb
+dtb-$(CONFIG_ARCH_QCOM) += \
+ qcom-apq8064-ifc6410.dtb \
+ qcom-apq8074-dragonboard.dtb \
+ qcom-msm8660-surf.dtb \
+ qcom-msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
new file mode 100644
@@ -0,0 +1,16 @@
+#include "qcom-apq8064-v2.0.dtsi"
+
+/ {
+ model = "Qualcomm APQ8064/IFC6410";
+ compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
+
+ soc {
+ gsbi@16600000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ serial@16640000 {
+ status = "ok";
+ };
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1 @@
+#include "qcom-apq8064.dtsi"
new file mode 100644
@@ -0,0 +1,170 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+ model = "Qualcomm APQ8064";
+ compatible = "qcom,apq8064";
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "qcom,krait";
+ enable-method = "qcom,kpss-acc-v1";
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc0>;
+ qcom,saw = <&saw0>;
+ };
+
+ cpu@1 {
+ compatible = "qcom,krait";
+ enable-method = "qcom,kpss-acc-v1";
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc1>;
+ qcom,saw = <&saw1>;
+ };
+
+ cpu@2 {
+ compatible = "qcom,krait";
+ enable-method = "qcom,kpss-acc-v1";
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc2>;
+ qcom,saw = <&saw2>;
+ };
+
+ cpu@3 {
+ compatible = "qcom,krait";
+ enable-method = "qcom,kpss-acc-v1";
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc3>;
+ qcom,saw = <&saw3>;
+ };
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ cpu-pmu {
+ compatible = "qcom,krait-pmu";
+ interrupts = <1 10 0x304>;
+ };
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ intc: interrupt-controller@2000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x02000000 0x1000>,
+ <0x02002000 0x1000>;
+ };
+
+ timer@200a000 {
+ compatible = "qcom,kpss-timer", "qcom,msm-timer";
+ interrupts = <1 1 0x301>,
+ <1 2 0x301>,
+ <1 3 0x301>;
+ reg = <0x0200a000 0x100>;
+ clock-frequency = <27000000>,
+ <32768>;
+ cpu-offset = <0x80000>;
+ };
+
+ acc0: clock-controller@2088000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+ };
+
+ acc1: clock-controller@2098000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+ };
+
+ acc2: clock-controller@20a8000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
+ };
+
+ acc3: clock-controller@20b8000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
+ };
+
+ saw0: regulator@2089000 {
+ compatible = "qcom,saw2";
+ reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
+ saw1: regulator@2099000 {
+ compatible = "qcom,saw2";
+ reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
+ saw2: regulator@20a9000 {
+ compatible = "qcom,saw2";
+ reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
+ saw3: regulator@20b9000 {
+ compatible = "qcom,saw2";
+ reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
+ gsbi7: gsbi@16600000 {
+ status = "disabled";
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x16600000 0x100>;
+ clocks = <&gcc GSBI7_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ serial@16640000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16640000 0x1000>,
+ <0x16600000 0x1000>;
+ interrupts = <0 158 0x0>;
+ clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+ };
+
+ qcom,ssbi@500000 {
+ compatible = "qcom,ssbi";
+ reg = <0x00500000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+ };
+
+ gcc: clock-controller@900000 {
+ compatible = "qcom,gcc-apq8064";
+ reg = <0x00900000 0x4000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+ };
+};
@@ -15,9 +15,10 @@
#include <asm/mach/arch.h>
static const char * const qcom_dt_match[] __initconst = {
+ "qcom,apq8064",
+ "qcom,apq8074-dragonboard",
"qcom,msm8660-surf",
"qcom,msm8960-cdp",
- "qcom,apq8074-dragonboard",
NULL
};
Add basic APQ8064 SoC include device tree and support for basic booting on the IFC6410 board. Also, keep dtb build list and qcom_dt_match in sorted order. Signed-off-by: Kumar Gala <galak@codeaurora.org> --- v2: * Fix gsbi controller reg address arch/arm/boot/dts/Makefile | 8 +- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 16 +++ arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi | 1 + arch/arm/boot/dts/qcom-apq8064.dtsi | 170 +++++++++++++++++++++++++++++ arch/arm/mach-qcom/board.c | 3 +- 5 files changed, 194 insertions(+), 4 deletions(-) create mode 100644 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts create mode 100644 arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi create mode 100644 arch/arm/boot/dts/qcom-apq8064.dtsi