@@ -178,4 +178,11 @@ config PHY_XGENE
help
This option enables support for APM X-Gene SoC multi-purpose PHY.
+config PHY_QCOM_IPQ806X_SATA
+ tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
+ depends on ARCH_QCOM
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+
endmenu
@@ -20,3 +20,4 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
+obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
new file mode 100644
@@ -0,0 +1,211 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+
+struct qcom_ipq806x_sata_phy {
+ void __iomem *mmio;
+ struct clk *cfg_clk;
+};
+
+#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b))
+
+#define SATA_PHY_P0_PARAM0 0x200
+#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(x) __set(x, 17, 12)
+#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK GENMASK(17, 12)
+#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2(x) __set(x, 11, 6)
+#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK GENMASK(11, 6)
+#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1(x) __set(x, 5, 0)
+#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK GENMASK(5, 0)
+
+#define SATA_PHY_P0_PARAM1 0x204
+#define SATA_PHY_P0_PARAM1_RESERVED_BITS31_21(x) __set(x, 31, 21)
+#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(x) __set(x, 20, 14)
+#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK GENMASK(20, 14)
+#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(x) __set(x, 13, 7)
+#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK GENMASK(13, 7)
+#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(x) __set(x, 6, 0)
+#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK GENMASK(6, 0)
+
+#define SATA_PHY_P0_PARAM2 0x208
+#define SATA_PHY_P0_PARAM2_RX_EQ(x) __set(x, 20, 18)
+#define SATA_PHY_P0_PARAM2_RX_EQ_MASK GENMASK(20, 18)
+
+#define SATA_PHY_P0_PARAM3 0x20C
+#define SATA_PHY_SSC_EN 0x8
+#define SATA_PHY_P0_PARAM4 0x210
+#define SATA_PHY_REF_SSP_EN 0x2
+#define SATA_PHY_RESET 0x1
+
+static inline void qcom_ipq806x_sata_delay_us(unsigned int delay)
+{
+ /* sleep for max. 50us more to combine processor wakeups */
+ usleep_range(delay, delay + 50);
+}
+
+static int qcom_ipq806x_sata_phy_init(struct phy *generic_phy)
+{
+ struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy);
+ u32 reg;
+
+ /* Setting SSC_EN to 1 */
+ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM3);
+ reg = reg | SATA_PHY_SSC_EN;
+ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM3);
+
+ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM0) &
+ ~(SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK |
+ SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK |
+ SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK);
+ reg |= SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(0xf);
+ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM0);
+
+ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM1) &
+ ~(SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK |
+ SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK |
+ SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK);
+ reg |= SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(0x55) |
+ SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(0x55) |
+ SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(0x55);
+ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM1);
+
+ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM2) &
+ ~SATA_PHY_P0_PARAM2_RX_EQ_MASK;
+ reg |= SATA_PHY_P0_PARAM2_RX_EQ(0x3);
+ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM2);
+
+ /* Setting PHY_RESET to 1 */
+ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
+ reg = reg | SATA_PHY_RESET;
+ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
+
+ /* Setting REF_SSP_EN to 1 */
+ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
+ reg = reg | SATA_PHY_REF_SSP_EN | SATA_PHY_RESET;
+ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
+ mb();
+ qcom_ipq806x_sata_delay_us(20);
+
+ /* Clearing PHY_RESET to 0 */
+ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
+ reg = reg & ~SATA_PHY_RESET;
+ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
+
+ return 0;
+}
+
+static int qcom_ipq806x_sata_phy_exit(struct phy *generic_phy)
+{
+ struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy);
+ u32 reg;
+
+ /* Setting PHY_RESET to 1 */
+ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
+ reg = reg | SATA_PHY_RESET;
+ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
+
+ return 0;
+}
+
+static struct phy_ops qcom_ipq806x_sata_phy_ops = {
+ .init = qcom_ipq806x_sata_phy_init,
+ .exit = qcom_ipq806x_sata_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev)
+{
+ struct qcom_ipq806x_sata_phy *phy;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct phy_provider *phy_provider;
+ struct phy *generic_phy;
+ int ret;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy) {
+ dev_err(dev, "%s: failed to allocate phy\n", __func__);
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ phy->mmio = devm_ioremap_resource(dev, res);
+ if (IS_ERR(phy->mmio))
+ return PTR_ERR(phy->mmio);
+
+ generic_phy = devm_phy_create(dev, &qcom_ipq806x_sata_phy_ops, NULL);
+ if (IS_ERR(generic_phy)) {
+ dev_err(dev, "%s: failed to create phy\n", __func__);
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, phy);
+
+ phy->cfg_clk = devm_clk_get(dev, "cfg");
+ if (IS_ERR(phy->cfg_clk)) {
+ dev_err(dev, "Failed to get sata cfg clock\n");
+ return PTR_ERR(phy->cfg_clk);
+ }
+
+ ret = clk_prepare_enable(phy->cfg_clk);
+ if (ret)
+ return ret;
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ clk_disable_unprepare(phy->cfg_clk);
+ dev_err(dev, "%s: failed to register phy\n", __func__);
+ return PTR_ERR(phy_provider);
+ }
+
+ return 0;
+}
+
+static int qcom_ipq806x_sata_phy_remove(struct platform_device *pdev)
+{
+ struct qcom_ipq806x_sata_phy *phy = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(phy->cfg_clk);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_ipq806x_sata_phy_of_match[] = {
+ { .compatible = "qcom,ipq806x-sata-phy" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, qcom_ipq806x_sata_phy_of_match);
+
+static struct platform_driver qcom_ipq806x_sata_phy_driver = {
+ .probe = qcom_ipq806x_sata_phy_probe,
+ .remove = qcom_ipq806x_sata_phy_remove,
+ .driver = {
+ .name = "qcom-ipq806x-sata-phy",
+ .owner = THIS_MODULE,
+ .of_match_table = qcom_ipq806x_sata_phy_of_match,
+ }
+};
+module_platform_driver(qcom_ipq806x_sata_phy_driver);
+
+MODULE_DESCRIPTION("QCOM IPQ806x SATA PHY driver");
+MODULE_LICENSE("GPL v2");
Add a PHY driver for uses with AHCI based SATA controller driver on the IPQ806x family of SoCs. Signed-off-by: Kumar Gala <galak@codeaurora.org> --- v3: * Added Kconfig HAS_IOMEM dep * re-ordered probe function so phy_provider_register is last v2: * dropped unused dev pointer in struct qcom_ipq806x_sata_phy * remove unnecessary reg initializaiton * Removed unneeded error message * Added remove function to disable the clock drivers/phy/Kconfig | 7 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-qcom-ipq806x-sata.c | 211 ++++++++++++++++++++++++++++++++++++ 3 files changed, 219 insertions(+) create mode 100644 drivers/phy/phy-qcom-ipq806x-sata.c