@@ -70,3 +70,11 @@ config MSM_MMCC_8974
Support for the multimedia clock controller on msm8974 devices.
Say Y if you want to support multimedia devices such as display,
graphics, video encode/decode, camera, etc.
+
+config QCOM_HFPLL
+ tristate "High-Frequency PLL (HFPLL) Clock Controller"
+ depends on COMMON_CLK_QCOM
+ help
+ Support for the high-frequency PLLs present on Qualcomm devices.
+ Say Y if you want to support CPU frequency scaling on devices
+ such as MSM8974, APQ8084, etc.
@@ -17,3 +17,4 @@ obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o
obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
+obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
new file mode 100644
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include "clk-regmap.h"
+#include "clk-hfpll.h"
+
+static const struct hfpll_data hdata = {
+ .mode_reg = 0x00,
+ .l_reg = 0x04,
+ .m_reg = 0x08,
+ .n_reg = 0x0c,
+ .user_reg = 0x10,
+ .config_reg = 0x14,
+ .config_val = 0x430405d,
+ .status_reg = 0x1c,
+ .lock_bit = 16,
+
+ .user_val = 0x8,
+ .user_vco_mask = 0x100000,
+ .low_vco_max_rate = 1248000000,
+ .min_rate = 537600000UL,
+ .max_rate = 2900000000UL,
+};
+
+static const struct of_device_id qcom_hfpll_match_table[] = {
+ { .compatible = "qcom,hfpll" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);
+
+static struct regmap_config hfpll_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x30,
+ .fast_io = true,
+};
+
+static int qcom_hfpll_probe(struct platform_device *pdev)
+{
+ struct clk *clk;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ void __iomem *base;
+ struct regmap *regmap;
+ struct clk_hfpll *h;
+ struct clk_init_data init = {
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_ops_hfpll,
+ };
+
+ h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL);
+ if (!h)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ if (of_property_read_string_index(dev->of_node, "clock-output-names",
+ 0, &init.name))
+ return -ENODEV;
+
+ h->d = &hdata;
+ h->clkr.hw.init = &init;
+ spin_lock_init(&h->lock);
+
+ clk = devm_clk_register_regmap(&pdev->dev, &h->clkr);
+
+ return PTR_ERR_OR_ZERO(clk);
+}
+
+static struct platform_driver qcom_hfpll_driver = {
+ .probe = qcom_hfpll_probe,
+ .driver = {
+ .name = "qcom-hfpll",
+ .owner = THIS_MODULE,
+ .of_match_table = qcom_hfpll_match_table,
+ },
+};
+module_platform_driver(qcom_hfpll_driver);
+
+MODULE_DESCRIPTION("QCOM HFPLL Clock Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-hfpll");
On some devices (MSM8974 for example), the HFPLLs are instantiated within the Krait processor subsystem as separate register regions. Add a driver for these PLLs so that we can provide HFPLL clocks for use by the system. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> --- drivers/clk/qcom/Kconfig | 8 ++++ drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/hfpll.c | 110 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 119 insertions(+) create mode 100644 drivers/clk/qcom/hfpll.c