diff mbox

ARM: qcom: Fix SCM interface for big-endian kernels

Message ID 1411425393-5537-1-git-send-email-sboyd@codeaurora.org (mailing list archive)
State New, archived
Headers show

Commit Message

Stephen Boyd Sept. 22, 2014, 10:36 p.m. UTC
The secure environment only runs in little-endian mode, so any
buffers shared with the secure environment should have their
contents converted to little-endian. We also mark such elements
with __le32 to allow sparse to catch such problems.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/soc/qcom/scm-boot.c |  8 ++++----
 drivers/soc/qcom/scm.c      | 34 ++++++++++++++++++----------------
 2 files changed, 22 insertions(+), 20 deletions(-)

Comments

Kumar Gala Sept. 23, 2014, 4:47 p.m. UTC | #1
On Sep 22, 2014, at 5:36 PM, Stephen Boyd <sboyd@codeaurora.org> wrote:

> The secure environment only runs in little-endian mode, so any
> buffers shared with the secure environment should have their
> contents converted to little-endian. We also mark such elements
> with __le32 to allow sparse to catch such problems.
> 
> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
> ---
> drivers/soc/qcom/scm-boot.c |  8 ++++----
> drivers/soc/qcom/scm.c      | 34 ++++++++++++++++++----------------
> 2 files changed, 22 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/soc/qcom/scm-boot.c b/drivers/soc/qcom/scm-boot.c
> index 60ff7b482141..3e4d77b371c6 100644
> --- a/drivers/soc/qcom/scm-boot.c
> +++ b/drivers/soc/qcom/scm-boot.c
> @@ -27,12 +27,12 @@
> int scm_set_boot_addr(phys_addr_t addr, int flags)
> {
> 	struct {
> -		unsigned int flags;
> -		phys_addr_t  addr;
> +		__le32 flags;
> +		__le32 addr;

Hmm, was phys_addr_t wrong here before?  I ask because don’t we support LPAE on some systems?

> 	} cmd;
> 
> -	cmd.addr = addr;
> -	cmd.flags = flags;
> +	cmd.addr = cpu_to_le32(addr);
> +	cmd.flags = cpu_to_le32(flags);
> 	return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
> 			&cmd, sizeof(cmd), NULL, 0);
> }
> diff --git a/drivers/soc/qcom/scm.c b/drivers/soc/qcom/scm.c
> index be1e2beec796..feeb4e4bb22d 100644
> --- a/drivers/soc/qcom/scm.c
> +++ b/drivers/soc/qcom/scm.c
> @@ -62,11 +62,11 @@ static DEFINE_MUTEX(scm_lock);
>  * to access the buffers in a safe manner.
>  */
> struct scm_command {
> -	u32	len;
> -	u32	buf_offset;
> -	u32	resp_hdr_offset;
> -	u32	id;
> -	u32	buf[0];
> +	__le32 len;
> +	__le32 buf_offset;
> +	__le32 resp_hdr_offset;
> +	__le32 id;
> +	__le32 buf[0];
> };
> 
> /**
> @@ -76,9 +76,9 @@ struct scm_command {
>  * @is_complete: indicates if the command has finished processing
>  */
> struct scm_response {
> -	u32	len;
> -	u32	buf_offset;
> -	u32	is_complete;
> +	__le32 len;
> +	__le32 buf_offset;
> +	__le32 is_complete;
> };
> 
> /**
> @@ -96,12 +96,14 @@ static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size)
> 	struct scm_command *cmd;
> 	size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size +
> 		resp_size;
> +	u32 offset;
> 
> 	cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
> 	if (cmd) {
> -		cmd->len = len;
> -		cmd->buf_offset = offsetof(struct scm_command, buf);
> -		cmd->resp_hdr_offset = cmd->buf_offset + cmd_size;
> +		cmd->len = cpu_to_le32(len);
> +		offset = offsetof(struct scm_command, buf);
> +		cmd->buf_offset = cpu_to_le32(offset);
> +		cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
> 	}
> 	return cmd;
> }
> @@ -126,7 +128,7 @@ static inline void free_scm_command(struct scm_command *cmd)
> static inline struct scm_response *scm_command_to_response(
> 		const struct scm_command *cmd)
> {
> -	return (void *)cmd + cmd->resp_hdr_offset;
> +	return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
> }
> 
> /**
> @@ -148,7 +150,7 @@ static inline void *scm_get_command_buffer(const struct scm_command *cmd)
>  */
> static inline void *scm_get_response_buffer(const struct scm_response *rsp)
> {
> -	return (void *)rsp + rsp->buf_offset;
> +	return (void *)rsp + le32_to_cpu(rsp->buf_offset);
> }
> 
> static int scm_remap_error(int err)
> @@ -201,8 +203,8 @@ static int __scm_call(const struct scm_command *cmd)
> 	 * Flush the command buffer so that the secure world sees
> 	 * the correct data.
> 	 */
> -	__cpuc_flush_dcache_area((void *)cmd, cmd->len);
> -	outer_flush_range(cmd_addr, cmd_addr + cmd->len);
> +	__cpuc_flush_dcache_area((void *)cmd, le32_to_cpu(cmd->len));
> +	outer_flush_range(cmd_addr, cmd_addr + le32_to_cpu(cmd->len));
> 
> 	ret = smc(cmd_addr);
> 	if (ret < 0)
> @@ -260,7 +262,7 @@ int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
> 	if (!cmd)
> 		return -ENOMEM;
> 
> -	cmd->id = (svc_id << 10) | cmd_id;
> +	cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
> 	if (cmd_buf)
> 		memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len);
> 
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stephen Boyd Sept. 23, 2014, 5:42 p.m. UTC | #2
On 09/23/14 09:47, Kumar Gala wrote:
> On Sep 22, 2014, at 5:36 PM, Stephen Boyd <sboyd@codeaurora.org> wrote:
>
>> The secure environment only runs in little-endian mode, so any
>> buffers shared with the secure environment should have their
>> contents converted to little-endian. We also mark such elements
>> with __le32 to allow sparse to catch such problems.
>>
>> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
>> ---
>> drivers/soc/qcom/scm-boot.c |  8 ++++----
>> drivers/soc/qcom/scm.c      | 34 ++++++++++++++++++----------------
>> 2 files changed, 22 insertions(+), 20 deletions(-)
>>
>> diff --git a/drivers/soc/qcom/scm-boot.c b/drivers/soc/qcom/scm-boot.c
>> index 60ff7b482141..3e4d77b371c6 100644
>> --- a/drivers/soc/qcom/scm-boot.c
>> +++ b/drivers/soc/qcom/scm-boot.c
>> @@ -27,12 +27,12 @@
>> int scm_set_boot_addr(phys_addr_t addr, int flags)
>> {
>> 	struct {
>> -		unsigned int flags;
>> -		phys_addr_t  addr;
>> +		__le32 flags;
>> +		__le32 addr;
> Hmm, was phys_addr_t wrong here before?  I ask because don’t we support LPAE on some systems?

Yes it was wrong. It is exactly 32 bits wide.
Kumar Gala Sept. 23, 2014, 5:45 p.m. UTC | #3
On Sep 23, 2014, at 12:42 PM, Stephen Boyd <sboyd@codeaurora.org> wrote:

> On 09/23/14 09:47, Kumar Gala wrote:
>> On Sep 22, 2014, at 5:36 PM, Stephen Boyd <sboyd@codeaurora.org> wrote:
>> 
>>> The secure environment only runs in little-endian mode, so any
>>> buffers shared with the secure environment should have their
>>> contents converted to little-endian. We also mark such elements
>>> with __le32 to allow sparse to catch such problems.
>>> 
>>> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
>>> ---
>>> drivers/soc/qcom/scm-boot.c |  8 ++++----
>>> drivers/soc/qcom/scm.c      | 34 ++++++++++++++++++----------------
>>> 2 files changed, 22 insertions(+), 20 deletions(-)
>>> 
>>> diff --git a/drivers/soc/qcom/scm-boot.c b/drivers/soc/qcom/scm-boot.c
>>> index 60ff7b482141..3e4d77b371c6 100644
>>> --- a/drivers/soc/qcom/scm-boot.c
>>> +++ b/drivers/soc/qcom/scm-boot.c
>>> @@ -27,12 +27,12 @@
>>> int scm_set_boot_addr(phys_addr_t addr, int flags)
>>> {
>>> 	struct {
>>> -		unsigned int flags;
>>> -		phys_addr_t  addr;
>>> +		__le32 flags;
>>> +		__le32 addr;
>> Hmm, was phys_addr_t wrong here before?  I ask because don’t we support LPAE on some systems?
> 
> Yes it was wrong. It is exactly 32 bits wide.

So we should probably have a patch to fix the interface scm_set_boot_addr() to take a u32 addr instead of a phys_addr_t

- k
Stephen Boyd Sept. 23, 2014, 8:31 p.m. UTC | #4
On 09/23/14 10:45, Kumar Gala wrote:
> On Sep 23, 2014, at 12:42 PM, Stephen Boyd <sboyd@codeaurora.org> wrote:
>
>> On 09/23/14 09:47, Kumar Gala wrote:
>>> On Sep 22, 2014, at 5:36 PM, Stephen Boyd <sboyd@codeaurora.org> wrote:
>>>
>>>> The secure environment only runs in little-endian mode, so any
>>>> buffers shared with the secure environment should have their
>>>> contents converted to little-endian. We also mark such elements
>>>> with __le32 to allow sparse to catch such problems.
>>>>
>>>> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
>>>> ---
>>>> drivers/soc/qcom/scm-boot.c |  8 ++++----
>>>> drivers/soc/qcom/scm.c      | 34 ++++++++++++++++++----------------
>>>> 2 files changed, 22 insertions(+), 20 deletions(-)
>>>>
>>>> diff --git a/drivers/soc/qcom/scm-boot.c b/drivers/soc/qcom/scm-boot.c
>>>> index 60ff7b482141..3e4d77b371c6 100644
>>>> --- a/drivers/soc/qcom/scm-boot.c
>>>> +++ b/drivers/soc/qcom/scm-boot.c
>>>> @@ -27,12 +27,12 @@
>>>> int scm_set_boot_addr(phys_addr_t addr, int flags)
>>>> {
>>>> 	struct {
>>>> -		unsigned int flags;
>>>> -		phys_addr_t  addr;
>>>> +		__le32 flags;
>>>> +		__le32 addr;
>>> Hmm, was phys_addr_t wrong here before?  I ask because don’t we support LPAE on some systems?
>> Yes it was wrong. It is exactly 32 bits wide.
> So we should probably have a patch to fix the interface scm_set_boot_addr() to take a u32 addr instead of a phys_addr_t
>

Sure I can send a patch for that too.
diff mbox

Patch

diff --git a/drivers/soc/qcom/scm-boot.c b/drivers/soc/qcom/scm-boot.c
index 60ff7b482141..3e4d77b371c6 100644
--- a/drivers/soc/qcom/scm-boot.c
+++ b/drivers/soc/qcom/scm-boot.c
@@ -27,12 +27,12 @@ 
 int scm_set_boot_addr(phys_addr_t addr, int flags)
 {
 	struct {
-		unsigned int flags;
-		phys_addr_t  addr;
+		__le32 flags;
+		__le32 addr;
 	} cmd;
 
-	cmd.addr = addr;
-	cmd.flags = flags;
+	cmd.addr = cpu_to_le32(addr);
+	cmd.flags = cpu_to_le32(flags);
 	return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
 			&cmd, sizeof(cmd), NULL, 0);
 }
diff --git a/drivers/soc/qcom/scm.c b/drivers/soc/qcom/scm.c
index be1e2beec796..feeb4e4bb22d 100644
--- a/drivers/soc/qcom/scm.c
+++ b/drivers/soc/qcom/scm.c
@@ -62,11 +62,11 @@  static DEFINE_MUTEX(scm_lock);
  * to access the buffers in a safe manner.
  */
 struct scm_command {
-	u32	len;
-	u32	buf_offset;
-	u32	resp_hdr_offset;
-	u32	id;
-	u32	buf[0];
+	__le32 len;
+	__le32 buf_offset;
+	__le32 resp_hdr_offset;
+	__le32 id;
+	__le32 buf[0];
 };
 
 /**
@@ -76,9 +76,9 @@  struct scm_command {
  * @is_complete: indicates if the command has finished processing
  */
 struct scm_response {
-	u32	len;
-	u32	buf_offset;
-	u32	is_complete;
+	__le32 len;
+	__le32 buf_offset;
+	__le32 is_complete;
 };
 
 /**
@@ -96,12 +96,14 @@  static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size)
 	struct scm_command *cmd;
 	size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size +
 		resp_size;
+	u32 offset;
 
 	cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
 	if (cmd) {
-		cmd->len = len;
-		cmd->buf_offset = offsetof(struct scm_command, buf);
-		cmd->resp_hdr_offset = cmd->buf_offset + cmd_size;
+		cmd->len = cpu_to_le32(len);
+		offset = offsetof(struct scm_command, buf);
+		cmd->buf_offset = cpu_to_le32(offset);
+		cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
 	}
 	return cmd;
 }
@@ -126,7 +128,7 @@  static inline void free_scm_command(struct scm_command *cmd)
 static inline struct scm_response *scm_command_to_response(
 		const struct scm_command *cmd)
 {
-	return (void *)cmd + cmd->resp_hdr_offset;
+	return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
 }
 
 /**
@@ -148,7 +150,7 @@  static inline void *scm_get_command_buffer(const struct scm_command *cmd)
  */
 static inline void *scm_get_response_buffer(const struct scm_response *rsp)
 {
-	return (void *)rsp + rsp->buf_offset;
+	return (void *)rsp + le32_to_cpu(rsp->buf_offset);
 }
 
 static int scm_remap_error(int err)
@@ -201,8 +203,8 @@  static int __scm_call(const struct scm_command *cmd)
 	 * Flush the command buffer so that the secure world sees
 	 * the correct data.
 	 */
-	__cpuc_flush_dcache_area((void *)cmd, cmd->len);
-	outer_flush_range(cmd_addr, cmd_addr + cmd->len);
+	__cpuc_flush_dcache_area((void *)cmd, le32_to_cpu(cmd->len));
+	outer_flush_range(cmd_addr, cmd_addr + le32_to_cpu(cmd->len));
 
 	ret = smc(cmd_addr);
 	if (ret < 0)
@@ -260,7 +262,7 @@  int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
 	if (!cmd)
 		return -ENOMEM;
 
-	cmd->id = (svc_id << 10) | cmd_id;
+	cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
 	if (cmd_buf)
 		memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len);