@@ -129,6 +129,7 @@ enum {
/* Flag idn for Query Requests*/
enum flag_idn {
QUERY_FLAG_IDN_FDEVICEINIT = 0x01,
+ QUERY_FLAG_IDN_PWR_ON_WPE = 0x03,
QUERY_FLAG_IDN_BKOPS_EN = 0x04,
};
@@ -194,6 +195,18 @@ enum unit_desc_param {
UNIT_DESC_PARAM_LARGE_UNIT_SIZE_M1 = 0x22,
};
+/*
+ * Logical Unit Write Protect
+ * 00h: LU not write protected
+ * 01h: LU write protected when fPowerOnWPEn =1
+ * 02h: LU permanently write protected when fPermanentWPEn =1
+ */
+enum ufs_lu_wp_type {
+ UFS_LU_NO_WP = 0x00,
+ UFS_LU_POWER_ON_WP = 0x01,
+ UFS_LU_PERM_WP = 0x02,
+};
+
/* bActiveICCLevel parameter current units */
enum {
UFSHCD_NANO_AMP = 0,
@@ -226,11 +239,12 @@ enum {
};
/* Background operation status */
-enum {
+enum bkops_status {
BKOPS_STATUS_NO_OP = 0x0,
BKOPS_STATUS_NON_CRITICAL = 0x1,
BKOPS_STATUS_PERF_IMPACT = 0x2,
BKOPS_STATUS_CRITICAL = 0x3,
+ BKOPS_STATUS_MAX = BKOPS_STATUS_CRITICAL,
};
/* UTP QUERY Transaction Specific Fields OpCode */
@@ -291,6 +305,14 @@ enum {
UPIU_TASK_MANAGEMENT_FUNC_FAILED = 0x05,
UPIU_INCORRECT_LOGICAL_UNIT_NO = 0x09,
};
+
+/* UFS device power modes */
+enum ufs_dev_pwr_mode {
+ UFS_ACTIVE_PWR_MODE = 1,
+ UFS_SLEEP_PWR_MODE = 2,
+ UFS_POWERDOWN_PWR_MODE = 3,
+};
+
/**
* struct utp_upiu_header - UPIU header structure
* @dword_0: UPIU header DW-0
@@ -437,6 +459,12 @@ struct ufs_query_res {
#define UFS_VREG_VCCQ2_MIN_UV 1650000 /* uV */
#define UFS_VREG_VCCQ2_MAX_UV 1950000 /* uV */
+/*
+ * VCCQ & VCCQ2 current requirement when UFS device is in sleep state
+ * and link is in Hibern8 state.
+ */
+#define UFS_VREG_LPM_LOAD_UA 1000 /* uA */
+
struct ufs_vreg {
struct regulator *reg;
const char *name;
@@ -454,4 +482,10 @@ struct ufs_vreg_info {
struct ufs_vreg *vdd_hba;
};
+struct ufs_dev_info {
+ bool f_power_on_wp_en;
+ /* Keeps information if any of the LU is power on write protected */
+ bool is_lu_power_on_wp;
+};
+
#endif /* End of Header */
@@ -43,34 +43,24 @@
* @pdev: pointer to PCI device handle
* @state: power state
*
- * Returns -ENOSYS
+ * Returns 0 if successful
+ * Returns non-zero otherwise
*/
static int ufshcd_pci_suspend(struct device *dev)
{
- /*
- * TODO:
- * 1. Call ufshcd_suspend
- * 2. Do bus specific power management
- */
-
- return -ENOSYS;
+ return ufshcd_system_suspend(dev_get_drvdata(dev));
}
/**
* ufshcd_pci_resume - resume power management function
* @pdev: pointer to PCI device handle
*
- * Returns -ENOSYS
+ * Returns 0 if successful
+ * Returns non-zero otherwise
*/
static int ufshcd_pci_resume(struct device *dev)
{
- /*
- * TODO:
- * 1. Call ufshcd_resume.
- * 2. Do bus specific wake up
- */
-
- return -ENOSYS;
+ return ufshcd_system_resume(dev_get_drvdata(dev));
}
#else
#define ufshcd_pci_suspend NULL
@@ -80,30 +70,15 @@ static int ufshcd_pci_resume(struct device *dev)
#ifdef CONFIG_PM_RUNTIME
static int ufshcd_pci_runtime_suspend(struct device *dev)
{
- struct ufs_hba *hba = dev_get_drvdata(dev);
-
- if (!hba)
- return 0;
-
- return ufshcd_runtime_suspend(hba);
+ return ufshcd_runtime_suspend(dev_get_drvdata(dev));
}
static int ufshcd_pci_runtime_resume(struct device *dev)
{
- struct ufs_hba *hba = dev_get_drvdata(dev);
-
- if (!hba)
- return 0;
-
- return ufshcd_runtime_resume(hba);
+ return ufshcd_runtime_resume(dev_get_drvdata(dev));
}
static int ufshcd_pci_runtime_idle(struct device *dev)
{
- struct ufs_hba *hba = dev_get_drvdata(dev);
-
- if (!hba)
- return 0;
-
- return ufshcd_runtime_idle(hba);
+ return ufshcd_runtime_idle(dev_get_drvdata(dev));
}
#else /* !CONFIG_PM_RUNTIME */
#define ufshcd_pci_runtime_suspend NULL
@@ -117,7 +92,7 @@ static int ufshcd_pci_runtime_idle(struct device *dev)
*/
static void ufshcd_pci_shutdown(struct pci_dev *pdev)
{
- ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev));
+ ufshcd_shutdown((struct ufs_hba *)pci_get_drvdata(pdev));
}
/**
@@ -225,45 +225,24 @@ out:
* ufshcd_pltfrm_suspend - suspend power management function
* @dev: pointer to device handle
*
- *
- * Returns 0
+ * Returns 0 if successful
+ * Returns non-zero otherwise
*/
static int ufshcd_pltfrm_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct ufs_hba *hba = platform_get_drvdata(pdev);
-
- /*
- * TODO:
- * 1. Call ufshcd_suspend
- * 2. Do bus specific power management
- */
-
- disable_irq(hba->irq);
-
- return 0;
+ return ufshcd_system_suspend(dev_get_drvdata(dev));
}
/**
* ufshcd_pltfrm_resume - resume power management function
* @dev: pointer to device handle
*
- * Returns 0
+ * Returns 0 if successful
+ * Returns non-zero otherwise
*/
static int ufshcd_pltfrm_resume(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct ufs_hba *hba = platform_get_drvdata(pdev);
-
- /*
- * TODO:
- * 1. Call ufshcd_resume.
- * 2. Do bus specific wake up
- */
-
- enable_irq(hba->irq);
-
- return 0;
+ return ufshcd_system_resume(dev_get_drvdata(dev));
}
#else
#define ufshcd_pltfrm_suspend NULL
@@ -273,30 +252,15 @@ static int ufshcd_pltfrm_resume(struct device *dev)
#ifdef CONFIG_PM_RUNTIME
static int ufshcd_pltfrm_runtime_suspend(struct device *dev)
{
- struct ufs_hba *hba = dev_get_drvdata(dev);
-
- if (!hba)
- return 0;
-
- return ufshcd_runtime_suspend(hba);
+ return ufshcd_runtime_suspend(dev_get_drvdata(dev));
}
static int ufshcd_pltfrm_runtime_resume(struct device *dev)
{
- struct ufs_hba *hba = dev_get_drvdata(dev);
-
- if (!hba)
- return 0;
-
- return ufshcd_runtime_resume(hba);
+ return ufshcd_runtime_resume(dev_get_drvdata(dev));
}
static int ufshcd_pltfrm_runtime_idle(struct device *dev)
{
- struct ufs_hba *hba = dev_get_drvdata(dev);
-
- if (!hba)
- return 0;
-
- return ufshcd_runtime_idle(hba);
+ return ufshcd_runtime_idle(dev_get_drvdata(dev));
}
#else /* !CONFIG_PM_RUNTIME */
#define ufshcd_pltfrm_runtime_suspend NULL
@@ -304,6 +268,11 @@ static int ufshcd_pltfrm_runtime_idle(struct device *dev)
#define ufshcd_pltfrm_runtime_idle NULL
#endif /* CONFIG_PM_RUNTIME */
+static void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
+{
+ ufshcd_shutdown((struct ufs_hba *)platform_get_drvdata(pdev));
+}
+
/**
* ufshcd_pltfrm_probe - probe routine of the driver
* @pdev: pointer to Platform device handle
@@ -404,6 +373,7 @@ static const struct dev_pm_ops ufshcd_dev_pm_ops = {
static struct platform_driver ufshcd_pltfrm_driver = {
.probe = ufshcd_pltfrm_probe,
.remove = ufshcd_pltfrm_remove,
+ .shutdown = ufshcd_pltfrm_shutdown,
.driver = {
.name = "ufshcd",
.owner = THIS_MODULE,
@@ -44,7 +44,6 @@
#define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\
UTP_TASK_REQ_COMPL |\
- UIC_POWER_MODE |\
UFSHCD_ERROR_MASK)
/* UIC command timeout, unit: ms */
#define UIC_CMD_TIMEOUT 500
@@ -138,12 +137,72 @@ enum {
#define ufshcd_clear_eh_in_progress(h) \
(h->eh_flags &= ~UFSHCD_EH_IN_PROGRESS)
+#define ufshcd_set_ufs_dev_active(h) \
+ ((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE)
+#define ufshcd_set_ufs_dev_sleep(h) \
+ ((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE)
+#define ufshcd_set_ufs_dev_poweroff(h) \
+ ((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE)
+#define ufshcd_is_ufs_dev_active(h) \
+ ((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE)
+#define ufshcd_is_ufs_dev_sleep(h) \
+ ((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE)
+#define ufshcd_is_ufs_dev_poweroff(h) \
+ ((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE)
+
+static struct ufs_pm_lvl_states ufs_pm_lvl_states[] = {
+ {UFS_ACTIVE_PWR_MODE, UIC_LINK_ACTIVE_STATE},
+ {UFS_ACTIVE_PWR_MODE, UIC_LINK_HIBERN8_STATE},
+ {UFS_SLEEP_PWR_MODE, UIC_LINK_ACTIVE_STATE},
+ {UFS_SLEEP_PWR_MODE, UIC_LINK_HIBERN8_STATE},
+ {UFS_POWERDOWN_PWR_MODE, UIC_LINK_HIBERN8_STATE},
+ {UFS_POWERDOWN_PWR_MODE, UIC_LINK_OFF_STATE},
+};
+
+static inline enum ufs_dev_pwr_mode
+ufs_get_pm_lvl_to_dev_pwr_mode(enum ufs_pm_level lvl)
+{
+ return ufs_pm_lvl_states[lvl].dev_state;
+}
+
+static inline enum uic_link_state
+ufs_get_pm_lvl_to_link_pwr_state(enum ufs_pm_level lvl)
+{
+ return ufs_pm_lvl_states[lvl].link_state;
+}
+
static void ufshcd_tmc_handler(struct ufs_hba *hba);
static void ufshcd_async_scan(void *data, async_cookie_t cookie);
static int ufshcd_reset_and_restore(struct ufs_hba *hba);
static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag);
static void ufshcd_hba_exit(struct ufs_hba *hba);
static int ufshcd_probe_hba(struct ufs_hba *hba);
+static int ufshcd_host_reset_and_restore(struct ufs_hba *hba);
+static irqreturn_t ufshcd_intr(int irq, void *__hba);
+
+static inline int ufshcd_enable_irq(struct ufs_hba *hba)
+{
+ int ret = 0;
+
+ if (!hba->is_irq_enabled) {
+ ret = request_irq(hba->irq, ufshcd_intr, IRQF_SHARED, UFSHCD,
+ hba);
+ if (ret)
+ dev_err(hba->dev, "%s: request_irq failed, ret=%d\n",
+ __func__, ret);
+ hba->is_irq_enabled = true;
+ }
+
+ return ret;
+}
+
+static inline void ufshcd_disable_irq(struct ufs_hba *hba)
+{
+ if (hba->is_irq_enabled) {
+ free_irq(hba->irq, hba);
+ hba->is_irq_enabled = false;
+ }
+}
/*
* ufshcd_wait_for_register - wait for register value to change
@@ -1789,44 +1848,54 @@ out:
EXPORT_SYMBOL_GPL(ufshcd_dme_get_attr);
/**
- * ufshcd_uic_change_pwr_mode - Perform the UIC power mode chage
- * using DME_SET primitives.
+ * ufshcd_uic_pwr_ctrl - executes UIC commands (which affects the link power
+ * state) and waits for it to take effect.
+ *
* @hba: per adapter instance
- * @mode: powr mode value
+ * @cmd: UIC command to execute
+ *
+ * DME operations like DME_SET(PA_PWRMODE), DME_HIBERNATE_ENTER &
+ * DME_HIBERNATE_EXIT commands take some time to take its effect on both host
+ * and device UniPro link and hence it's final completion would be indicated by
+ * dedicated status bits in Interrupt Status register (UPMS, UHES, UHXS) in
+ * addition to normal UIC command completion Status (UCCS). This function only
+ * returns after the relevant status bits indicate the completion.
*
* Returns 0 on success, non-zero value on failure
*/
-static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode)
+int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd)
{
- struct uic_command uic_cmd = {0};
- struct completion pwr_done;
+ struct completion uic_async_done;
unsigned long flags;
u8 status;
int ret;
- uic_cmd.command = UIC_CMD_DME_SET;
- uic_cmd.argument1 = UIC_ARG_MIB(PA_PWRMODE);
- uic_cmd.argument3 = mode;
- init_completion(&pwr_done);
-
mutex_lock(&hba->uic_cmd_mutex);
+ init_completion(&uic_async_done);
spin_lock_irqsave(hba->host->host_lock, flags);
- hba->pwr_done = &pwr_done;
+ hba->uic_async_done = &uic_async_done;
+ ret = __ufshcd_send_uic_cmd(hba, cmd);
spin_unlock_irqrestore(hba->host->host_lock, flags);
- ret = __ufshcd_send_uic_cmd(hba, &uic_cmd);
if (ret) {
dev_err(hba->dev,
- "pwr mode change with mode 0x%x uic error %d\n",
- mode, ret);
+ "pwr ctrl cmd 0x%x with mode 0x%x uic error %d\n",
+ cmd->command, cmd->argument3, ret);
+ goto out;
+ }
+ ret = ufshcd_wait_for_uic_cmd(hba, cmd);
+ if (ret) {
+ dev_err(hba->dev,
+ "pwr ctrl cmd 0x%x with mode 0x%x uic error %d\n",
+ cmd->command, cmd->argument3, ret);
goto out;
}
- if (!wait_for_completion_timeout(hba->pwr_done,
+ if (!wait_for_completion_timeout(hba->uic_async_done,
msecs_to_jiffies(UIC_CMD_TIMEOUT))) {
dev_err(hba->dev,
- "pwr mode change with mode 0x%x completion timeout\n",
- mode);
+ "pwr ctrl cmd 0x%x with mode 0x%x completion timeout\n",
+ cmd->command, cmd->argument3);
ret = -ETIMEDOUT;
goto out;
}
@@ -1834,19 +1903,62 @@ static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode)
status = ufshcd_get_upmcrs(hba);
if (status != PWR_LOCAL) {
dev_err(hba->dev,
- "pwr mode change failed, host umpcrs:0x%x\n",
- status);
+ "pwr ctrl cmd 0x%0x failed, host umpcrs:0x%x\n",
+ cmd->command, status);
ret = (status != PWR_OK) ? status : -1;
}
out:
spin_lock_irqsave(hba->host->host_lock, flags);
- hba->pwr_done = NULL;
+ hba->uic_async_done = NULL;
spin_unlock_irqrestore(hba->host->host_lock, flags);
mutex_unlock(&hba->uic_cmd_mutex);
return ret;
}
/**
+ * ufshcd_uic_change_pwr_mode - Perform the UIC power mode chage
+ * using DME_SET primitives.
+ * @hba: per adapter instance
+ * @mode: powr mode value
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode)
+{
+ struct uic_command uic_cmd = {0};
+
+ uic_cmd.command = UIC_CMD_DME_SET;
+ uic_cmd.argument1 = UIC_ARG_MIB(PA_PWRMODE);
+ uic_cmd.argument3 = mode;
+
+ return ufshcd_uic_pwr_ctrl(hba, &uic_cmd);
+}
+
+static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba)
+{
+ struct uic_command uic_cmd = {0};
+
+ uic_cmd.command = UIC_CMD_DME_HIBER_ENTER;
+
+ return ufshcd_uic_pwr_ctrl(hba, &uic_cmd);
+}
+
+static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba)
+{
+ struct uic_command uic_cmd = {0};
+ int ret;
+
+ uic_cmd.command = UIC_CMD_DME_HIBER_EXIT;
+ ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd);
+ if (ret) {
+ ufshcd_set_link_off(hba);
+ ret = ufshcd_host_reset_and_restore(hba);
+ }
+
+ return ret;
+}
+
+/**
* ufshcd_config_max_pwr_mode - Set & Change power mode with
* maximum capability attribute information.
* @hba: per adapter instance
@@ -2045,6 +2157,9 @@ static int ufshcd_hba_enable(struct ufs_hba *hba)
msleep(5);
}
+ /* UniPro link is disabled at this point */
+ ufshcd_set_link_off(hba);
+
if (hba->vops && hba->vops->hce_enable_notify)
hba->vops->hce_enable_notify(hba, PRE_CHANGE);
@@ -2077,7 +2192,7 @@ static int ufshcd_hba_enable(struct ufs_hba *hba)
}
/* enable UIC related interrupts */
- ufshcd_enable_intr(hba, UIC_COMMAND_COMPL);
+ ufshcd_enable_intr(hba, UFSHCD_UIC_MASK);
if (hba->vops && hba->vops->hce_enable_notify)
hba->vops->hce_enable_notify(hba, POST_CHANGE);
@@ -2206,6 +2321,62 @@ static void ufshcd_set_queue_depth(struct scsi_device *sdev)
scsi_activate_tcq(sdev, lun_qdepth);
}
+/*
+ * ufshcd_get_lu_wp - returns the "b_lu_write_protect" from UNIT DESCRIPTOR
+ * @hba: per-adapter instance
+ * @lun: UFS device lun id
+ * @b_lu_write_protect: pointer to buffer to hold the LU's write protect info
+ *
+ * Returns 0 in case of success and b_lu_write_protect status would be returned
+ * @b_lu_write_protect parameter.
+ * Returns -ENOTSUPP if reading b_lu_write_protect is not supported.
+ * Returns -EINVAL in case of invalid parameters passed to this function.
+ */
+static int ufshcd_get_lu_wp(struct ufs_hba *hba,
+ u8 lun,
+ u8 *b_lu_write_protect)
+{
+ int ret;
+
+ if (!b_lu_write_protect)
+ ret = -EINVAL;
+ /*
+ * According to UFS device spec, RPMB LU can't be write
+ * protected so skip reading bLUWriteProtect parameter for
+ * it. For other W-LUs, UNIT DESCRIPTOR is not available.
+ */
+ else if (lun >= UFS_UPIU_MAX_GENERAL_LUN)
+ ret = -ENOTSUPP;
+ else
+ ret = ufshcd_read_unit_desc_param(hba,
+ lun,
+ UNIT_DESC_PARAM_LU_WR_PROTECT,
+ b_lu_write_protect,
+ sizeof(*b_lu_write_protect));
+ return ret;
+}
+
+/**
+ * ufshcd_get_lu_power_on_wp_status - get LU's power on write protect
+ * status
+ * @hba: per-adapter instance
+ * @sdev: pointer to SCSI device
+ *
+ */
+static inline void ufshcd_get_lu_power_on_wp_status(struct ufs_hba *hba,
+ struct scsi_device *sdev)
+{
+ if (hba->dev_info.f_power_on_wp_en &&
+ !hba->dev_info.is_lu_power_on_wp) {
+ u8 b_lu_write_protect;
+
+ if (!ufshcd_get_lu_wp(hba, ufshcd_scsi_to_upiu_lun(sdev->lun),
+ &b_lu_write_protect) &&
+ (b_lu_write_protect == UFS_LU_POWER_ON_WP))
+ hba->dev_info.is_lu_power_on_wp = true;
+ }
+}
+
/**
* ufshcd_slave_alloc - handle initial SCSI device configurations
* @sdev: pointer to SCSI device
@@ -2232,6 +2403,8 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev)
ufshcd_set_queue_depth(sdev);
+ ufshcd_get_lu_power_on_wp_status(hba, sdev);
+
return 0;
}
@@ -2459,8 +2632,8 @@ static void ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)
complete(&hba->active_uic_cmd->done);
}
- if ((intr_status & UIC_POWER_MODE) && hba->pwr_done)
- complete(hba->pwr_done);
+ if ((intr_status & UFSHCD_UIC_PWR_MASK) && hba->uic_async_done)
+ complete(hba->uic_async_done);
}
/**
@@ -2672,33 +2845,62 @@ static inline int ufshcd_get_bkops_status(struct ufs_hba *hba, u32 *status)
}
/**
- * ufshcd_urgent_bkops - handle urgent bkops exception event
+ * ufshcd_bkops_ctrl - control the auto bkops based on current bkops status
* @hba: per-adapter instance
+ * @status: bkops_status value
*
- * Enable fBackgroundOpsEn flag in the device to permit background
- * operations.
+ * Read the bkops_status from the UFS device and Enable fBackgroundOpsEn
+ * flag in the device to permit background operations if the device
+ * bkops_status is greater than or equal to "status" argument passed to
+ * this function, disable otherwise.
+ *
+ * Returns 0 for success, non-zero in case of failure.
+ *
+ * NOTE: Caller of this function can check the "hba->auto_bkops_enabled" flag
+ * to know whether auto bkops is enabled or disabled after this function
+ * returns control to it.
*/
-static int ufshcd_urgent_bkops(struct ufs_hba *hba)
+static int ufshcd_bkops_ctrl(struct ufs_hba *hba,
+ enum bkops_status status)
{
int err;
- u32 status = 0;
+ u32 curr_status = 0;
- err = ufshcd_get_bkops_status(hba, &status);
+ err = ufshcd_get_bkops_status(hba, &curr_status);
if (err) {
dev_err(hba->dev, "%s: failed to get BKOPS status %d\n",
__func__, err);
goto out;
+ } else if (curr_status > BKOPS_STATUS_MAX) {
+ dev_err(hba->dev, "%s: invalid BKOPS status %d\n",
+ __func__, curr_status);
+ err = -EINVAL;
+ goto out;
}
- status = status & 0xF;
-
- /* handle only if status indicates performance impact or critical */
- if (status >= BKOPS_STATUS_PERF_IMPACT)
+ if (curr_status >= status)
err = ufshcd_enable_auto_bkops(hba);
+ else
+ err = ufshcd_disable_auto_bkops(hba);
out:
return err;
}
+/**
+ * ufshcd_urgent_bkops - handle urgent bkops exception event
+ * @hba: per-adapter instance
+ *
+ * Enable fBackgroundOpsEn flag in the device to permit background
+ * operations.
+ *
+ * If BKOPs is enabled, this function returns 0, 1 if the bkops in not enabled
+ * and negative error value for any other failure.
+ */
+static int ufshcd_urgent_bkops(struct ufs_hba *hba)
+{
+ return ufshcd_bkops_ctrl(hba, BKOPS_STATUS_PERF_IMPACT);
+}
+
static inline int ufshcd_get_ee_status(struct ufs_hba *hba, u32 *status)
{
return ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR,
@@ -2730,7 +2932,7 @@ static void ufshcd_exception_event_handler(struct work_struct *work)
status &= hba->ee_ctrl_mask;
if (status & MASK_EE_URGENT_BKOPS) {
err = ufshcd_urgent_bkops(hba);
- if (err)
+ if (err < 0)
dev_err(hba->dev, "%s: failed to handle urgent bkops %d\n",
__func__, err);
}
@@ -3512,7 +3714,8 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
if (ret)
goto out;
- ufshcd_config_max_pwr_mode(hba);
+ /* UniPro link is active now */
+ ufshcd_set_link_active(hba);
ret = ufshcd_verify_dev_init(hba);
if (ret)
@@ -3522,11 +3725,27 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
if (ret)
goto out;
+ /* UFS device is also active now */
+ ufshcd_set_ufs_dev_active(hba);
ufshcd_force_reset_auto_bkops(hba);
hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
+ hba->wlun_dev_clr_ua = true;
+
+ ufshcd_config_max_pwr_mode(hba);
+
+ /*
+ * If we are in error handling context or in power management callbacks
+ * context, no need to scan the host
+ */
+ if (!ufshcd_eh_in_progress(hba) && !hba->pm_op_in_progress) {
+ bool flag;
+
+ /* clear any previous UFS device information */
+ memset(&hba->dev_info, 0, sizeof(hba->dev_info));
+ if (!ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG,
+ QUERY_FLAG_IDN_PWR_ON_WPE, &flag))
+ hba->dev_info.f_power_on_wp_en = flag;
- /* If we are in error handling context no need to scan the host */
- if (!ufshcd_eh_in_progress(hba)) {
if (!hba->is_init_prefetch)
ufshcd_init_icc_levels(hba);
@@ -3546,8 +3765,10 @@ out:
* If we failed to initialize the device or the device is not
* present, turn off the power/clocks etc.
*/
- if (ret && !ufshcd_eh_in_progress(hba))
+ if (ret && !ufshcd_eh_in_progress(hba) && !hba->pm_op_in_progress) {
+ pm_runtime_put_sync(hba->dev);
ufshcd_hba_exit(hba);
+ }
return ret;
}
@@ -3582,6 +3803,42 @@ static struct scsi_host_template ufshcd_driver_template = {
.can_queue = UFSHCD_CAN_QUEUE,
};
+static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg,
+ int ua)
+{
+ int ret = 0;
+ struct regulator *reg = vreg->reg;
+ const char *name = vreg->name;
+
+ BUG_ON(!vreg);
+
+ ret = regulator_set_optimum_mode(reg, ua);
+ if (ret >= 0) {
+ /*
+ * regulator_set_optimum_mode() returns new regulator
+ * mode upon success.
+ */
+ ret = 0;
+ } else {
+ dev_err(dev, "%s: %s set optimum mode(ua=%d) failed, err=%d\n",
+ __func__, name, ua, ret);
+ }
+
+ return ret;
+}
+
+static inline int ufshcd_config_vreg_lpm(struct ufs_hba *hba,
+ struct ufs_vreg *vreg)
+{
+ return ufshcd_config_vreg_load(hba->dev, vreg, UFS_VREG_LPM_LOAD_UA);
+}
+
+static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba,
+ struct ufs_vreg *vreg)
+{
+ return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA);
+}
+
static int ufshcd_config_vreg(struct device *dev,
struct ufs_vreg *vreg, bool on)
{
@@ -3602,18 +3859,9 @@ static int ufshcd_config_vreg(struct device *dev,
}
uA_load = on ? vreg->max_uA : 0;
- ret = regulator_set_optimum_mode(reg, uA_load);
- if (ret >= 0) {
- /*
- * regulator_set_optimum_mode() returns new regulator
- * mode upon success.
- */
- ret = 0;
- } else {
- dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n",
- __func__, name, uA_load, ret);
+ ret = ufshcd_config_vreg_load(dev, vreg, uA_load);
+ if (ret)
goto out;
- }
}
out:
return ret;
@@ -3749,7 +3997,8 @@ static int ufshcd_init_hba_vreg(struct ufs_hba *hba)
return 0;
}
-static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on)
+static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
+ bool skip_ref_clk)
{
int ret = 0;
struct ufs_clk_info *clki;
@@ -3760,6 +4009,9 @@ static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on)
list_for_each_entry(clki, head, list) {
if (!IS_ERR_OR_NULL(clki->clk)) {
+ if (skip_ref_clk && !strcmp(clki->name, "ref_clk"))
+ continue;
+
if (on && !clki->enabled) {
ret = clk_prepare_enable(clki->clk);
if (ret) {
@@ -3785,6 +4037,11 @@ out:
return ret;
}
+static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on)
+{
+ return __ufshcd_setup_clocks(hba, on, false);
+}
+
static int ufshcd_init_clocks(struct ufs_hba *hba)
{
int ret = 0;
@@ -3941,68 +4198,532 @@ static void ufshcd_hba_exit(struct ufs_hba *hba)
}
}
+static int
+ufshcd_send_request_sense(struct ufs_hba *hba, struct scsi_device *sdp)
+{
+ unsigned char cmd[6] = {REQUEST_SENSE,
+ 0,
+ 0,
+ 0,
+ SCSI_SENSE_BUFFERSIZE,
+ 0};
+ char *buffer;
+ int ret;
+
+ buffer = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
+ if (!buffer) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ret = scsi_execute_req_flags(sdp, cmd, DMA_FROM_DEVICE, buffer,
+ SCSI_SENSE_BUFFERSIZE, NULL,
+ msecs_to_jiffies(1000), 3, NULL, REQ_PM);
+ if (ret)
+ pr_err("%s: failed with err %d\n", __func__, ret);
+
+ kfree(buffer);
+out:
+ return ret;
+}
+
/**
- * ufshcd_suspend - suspend power management function
+ * ufshcd_set_dev_pwr_mode - sends START STOP UNIT command to set device
+ * power mode
* @hba: per adapter instance
- * @state: power state
+ * @pwr_mode: device power mode to set
*
- * Returns -ENOSYS
+ * Returns 0 if requested power mode is set successfully
+ * Returns non-zero if failed to set the requested power mode
*/
-int ufshcd_suspend(struct ufs_hba *hba, pm_message_t state)
+static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
+ enum ufs_dev_pwr_mode pwr_mode)
{
+ unsigned char cmd[6] = { START_STOP };
+ struct scsi_sense_hdr sshdr;
+ struct scsi_device *sdp = hba->sdev_ufs_device;
+ int ret;
+
+ if (!sdp || !scsi_device_online(sdp))
+ return -ENODEV;
+
+ /*
+ * If scsi commands fail, the scsi mid-layer schedules scsi error-
+ * handling, which would wait for host to be resumed. Since we know
+ * we are functional while we are here, skip host resume in error
+ * handling context.
+ */
+ hba->host->eh_noresume = 1;
+ if (hba->wlun_dev_clr_ua) {
+ ret = ufshcd_send_request_sense(hba, sdp);
+ if (ret)
+ goto out;
+ /* Unit attention condition is cleared now */
+ hba->wlun_dev_clr_ua = false;
+ }
+
+ cmd[4] = pwr_mode << 4;
+
/*
- * TODO:
- * 1. Block SCSI requests from SCSI midlayer
- * 2. Change the internal driver state to non operational
- * 3. Set UTRLRSR and UTMRLRSR bits to zero
- * 4. Wait until outstanding commands are completed
- * 5. Set HCE to zero to send the UFS host controller to reset state
+ * Current function would be generally called from the power management
+ * callbacks hence set the REQ_PM flag so that it doesn't resume the
+ * already suspended childs.
*/
+ ret = scsi_execute_req_flags(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
+ START_STOP_TIMEOUT, 0, NULL, REQ_PM);
+ if (ret) {
+ sdev_printk(KERN_WARNING, sdp,
+ "START_STOP failed for power mode: %d\n", pwr_mode);
+ scsi_show_result(ret);
+ if (driver_byte(ret) & DRIVER_SENSE) {
+ scsi_show_sense_hdr(&sshdr);
+ scsi_show_extd_sense(sshdr.asc, sshdr.ascq);
+ }
+ }
- return -ENOSYS;
+ if (!ret)
+ hba->curr_dev_pwr_mode = pwr_mode;
+out:
+ hba->host->eh_noresume = 0;
+ return ret;
+}
+
+static int ufshcd_link_state_transition(struct ufs_hba *hba,
+ enum uic_link_state req_link_state,
+ int check_for_bkops)
+{
+ int ret = 0;
+
+ if (req_link_state == hba->uic_link_state)
+ return 0;
+
+ if (req_link_state == UIC_LINK_HIBERN8_STATE) {
+ ret = ufshcd_uic_hibern8_enter(hba);
+ if (!ret)
+ ufshcd_set_link_hibern8(hba);
+ else
+ goto out;
+ }
+ /*
+ * If autobkops is enabled, link can't be turned off because
+ * turning off the link would also turn off the device.
+ */
+ else if ((req_link_state == UIC_LINK_OFF_STATE) &&
+ (!check_for_bkops || (check_for_bkops &&
+ !hba->auto_bkops_enabled))) {
+ /*
+ * Change controller state to "reset state" which
+ * should also put the link in off/reset state
+ */
+ ufshcd_hba_stop(hba);
+ /*
+ * TODO: Check if we need any delay to make sure that
+ * controller is reset
+ */
+ ufshcd_set_link_off(hba);
+ }
+
+out:
+ return ret;
+}
+
+static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
+{
+ /*
+ * If UFS device is either in UFS_Sleep turn off VCC rail to save some
+ * power.
+ *
+ * If UFS device and link is in OFF state, all power supplies (VCC,
+ * VCCQ, VCCQ2) can be turned off if power on write protect is not
+ * required. If UFS link is inactive (Hibern8 or OFF state) and device
+ * is in sleep state, put VCCQ & VCCQ2 rails in LPM mode.
+ *
+ * Ignore the error returned by ufshcd_toggle_vreg() as device is anyway
+ * in low power state which would save some power.
+ */
+ if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba) &&
+ !hba->dev_info.is_lu_power_on_wp) {
+ ufshcd_setup_vreg(hba, false);
+ } else if (!ufshcd_is_ufs_dev_active(hba)) {
+ ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
+ if (!ufshcd_is_link_active(hba)) {
+ ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
+ ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
+ }
+ }
+}
+
+static int ufshcd_vreg_set_hpm(struct ufs_hba *hba)
+{
+ int ret = 0;
+
+ if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba) &&
+ !hba->dev_info.is_lu_power_on_wp) {
+ ret = ufshcd_setup_vreg(hba, true);
+ } else if (!ufshcd_is_ufs_dev_active(hba)) {
+ ret = ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, true);
+ if (!ret && !ufshcd_is_link_active(hba)) {
+ ret = ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq);
+ if (ret)
+ goto vcc_disable;
+ ret = ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq2);
+ if (ret)
+ goto vccq_lpm;
+ }
+ }
+ goto out;
+
+vccq_lpm:
+ ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
+vcc_disable:
+ ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
+out:
+ return ret;
+}
+
+static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba)
+{
+ if (ufshcd_is_link_off(hba))
+ ufshcd_setup_hba_vreg(hba, false);
+}
+
+static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba)
+{
+ if (ufshcd_is_link_off(hba))
+ ufshcd_setup_hba_vreg(hba, true);
}
-EXPORT_SYMBOL_GPL(ufshcd_suspend);
/**
- * ufshcd_resume - resume power management function
+ * ufshcd_suspend - helper function for suspend operations
* @hba: per adapter instance
+ * @pm_op: desired low power operation type
+ *
+ * This function will try to put the UFS device and link into low power
+ * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl"
+ * (System PM level).
*
- * Returns -ENOSYS
+ * If this function is called during shutdown, it will make sure that
+ * both UFS device and UFS link is powered off.
+ *
+ * NOTE: UFS device & link must be active before we enter in this function.
+ *
+ * Returns 0 for success and non-zero for failure
*/
-int ufshcd_resume(struct ufs_hba *hba)
+static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{
+ int ret = 0;
+ enum ufs_pm_level pm_lvl;
+ enum ufs_dev_pwr_mode req_dev_pwr_mode;
+ enum uic_link_state req_link_state;
+
+ hba->pm_op_in_progress = 1;
+ if (!ufshcd_is_shutdown_pm(pm_op)) {
+ pm_lvl = ufshcd_is_runtime_pm(pm_op) ?
+ hba->rpm_lvl : hba->spm_lvl;
+ req_dev_pwr_mode = ufs_get_pm_lvl_to_dev_pwr_mode(pm_lvl);
+ req_link_state = ufs_get_pm_lvl_to_link_pwr_state(pm_lvl);
+ } else {
+ req_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE;
+ req_link_state = UIC_LINK_OFF_STATE;
+ }
+
/*
- * TODO:
- * 1. Set HCE to 1, to start the UFS host controller
- * initialization process
- * 2. Set UTRLRSR and UTMRLRSR bits to 1
- * 3. Change the internal driver state to operational
- * 4. Unblock SCSI requests from SCSI midlayer
+ * If we can't transition into any of the low power modes
+ * just gate the clocks.
*/
+ if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE &&
+ req_link_state == UIC_LINK_ACTIVE_STATE) {
+ goto disable_clks;
+ }
+
+ if ((req_dev_pwr_mode == hba->curr_dev_pwr_mode) &&
+ (req_link_state == hba->uic_link_state))
+ goto out;
- return -ENOSYS;
+ /* UFS device & link must be active before we enter in this function */
+ if (!ufshcd_is_ufs_dev_active(hba) || !ufshcd_is_link_active(hba)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (ufshcd_is_runtime_pm(pm_op)) {
+ /*
+ * The device is idle with no requests in the queue,
+ * allow background operations if needed.
+ */
+ ret = ufshcd_bkops_ctrl(hba, BKOPS_STATUS_NON_CRITICAL);
+ if (ret)
+ goto out;
+ }
+
+ if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
+ ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
+ !ufshcd_is_runtime_pm(pm_op))) {
+ /* ensure that bkops is disabled */
+ ufshcd_disable_auto_bkops(hba);
+ ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
+ if (ret)
+ goto out;
+ }
+
+ ret = ufshcd_link_state_transition(hba, req_link_state, 1);
+ if (ret)
+ goto set_dev_active;
+
+ ufshcd_vreg_set_lpm(hba);
+
+disable_clks:
+ /*
+ * Call vendor specific suspend callback. As these callbacks may access
+ * vendor specific host controller register space call them before the
+ * host clocks are ON.
+ */
+ if (hba->vops && hba->vops->suspend) {
+ ret = hba->vops->suspend(hba, pm_op);
+ if (ret)
+ goto set_link_active;
+ }
+
+ if (hba->vops && hba->vops->setup_clocks) {
+ ret = hba->vops->setup_clocks(hba, false);
+ if (ret)
+ goto vops_resume;
+ }
+
+ if (!ufshcd_is_link_active(hba))
+ ufshcd_setup_clocks(hba, false);
+ else
+ /* If link is active, device ref_clk can't be switched off */
+ __ufshcd_setup_clocks(hba, false, true);
+
+ /*
+ * Disable the host irq as host controller as there won't be any
+ * host controller trasanction expected till resume.
+ */
+ ufshcd_disable_irq(hba);
+ /* Put the host controller in low power mode if possible */
+ ufshcd_hba_vreg_set_lpm(hba);
+ goto out;
+
+vops_resume:
+ if (hba->vops && hba->vops->resume)
+ hba->vops->resume(hba, pm_op);
+set_link_active:
+ ufshcd_vreg_set_hpm(hba);
+ if (ufshcd_is_link_hibern8(hba) && !ufshcd_uic_hibern8_exit(hba))
+ ufshcd_set_link_active(hba);
+ else if (ufshcd_is_link_off(hba))
+ ufshcd_host_reset_and_restore(hba);
+set_dev_active:
+ if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE))
+ ufshcd_disable_auto_bkops(hba);
+out:
+ hba->pm_op_in_progress = 0;
+ return ret;
}
-EXPORT_SYMBOL_GPL(ufshcd_resume);
-int ufshcd_runtime_suspend(struct ufs_hba *hba)
+/**
+ * ufshcd_resume - helper function for resume operations
+ * @hba: per adapter instance
+ * @pm_op: runtime PM or system PM
+ *
+ * This function basically brings the UFS device, UniPro link and controller
+ * to active state.
+ *
+ * Returns 0 for success and non-zero for failure
+ */
+static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{
- if (!hba)
- return 0;
+ int ret;
+ enum uic_link_state old_link_state;
+
+ hba->pm_op_in_progress = 1;
+ old_link_state = hba->uic_link_state;
+
+ ufshcd_hba_vreg_set_hpm(hba);
+ /* Make sure clocks are enabled before accessing controller */
+ ret = ufshcd_setup_clocks(hba, true);
+ if (ret)
+ goto out;
+
+ if (hba->vops && hba->vops->setup_clocks) {
+ ret = hba->vops->setup_clocks(hba, true);
+ if (ret)
+ goto disable_clks;
+ }
+
+ /* enable the host irq as host controller would be active soon */
+ ret = ufshcd_enable_irq(hba);
+ if (ret)
+ goto disable_irq_and_vops_clks;
+
+ ret = ufshcd_vreg_set_hpm(hba);
+ if (ret)
+ goto disable_irq_and_vops_clks;
/*
- * The device is idle with no requests in the queue,
- * allow background operations.
+ * Call vendor specific resume callback. As these callbacks may access
+ * vendor specific host controller register space call them when the
+ * host clocks are ON.
*/
- return ufshcd_enable_auto_bkops(hba);
+ if (hba->vops && hba->vops->resume) {
+ ret = hba->vops->resume(hba, pm_op);
+ if (ret)
+ goto disable_vreg;
+ }
+
+ if (ufshcd_is_link_hibern8(hba)) {
+ ret = ufshcd_uic_hibern8_exit(hba);
+ if (!ret)
+ ufshcd_set_link_active(hba);
+ else
+ goto vendor_suspend;
+ } else if (ufshcd_is_link_off(hba)) {
+ ret = ufshcd_host_reset_and_restore(hba);
+ /*
+ * ufshcd_host_reset_and_restore() should have already
+ * set the link state as active
+ */
+ if (ret || !ufshcd_is_link_active(hba))
+ goto vendor_suspend;
+ }
+
+ if (!ufshcd_is_ufs_dev_active(hba)) {
+ ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE);
+ if (ret)
+ goto set_old_link_state;
+ }
+
+ ufshcd_disable_auto_bkops(hba);
+ goto out;
+
+set_old_link_state:
+ ufshcd_link_state_transition(hba, old_link_state, 0);
+vendor_suspend:
+ if (hba->vops && hba->vops->suspend)
+ hba->vops->suspend(hba, pm_op);
+disable_vreg:
+ ufshcd_vreg_set_lpm(hba);
+disable_irq_and_vops_clks:
+ ufshcd_disable_irq(hba);
+ if (hba->vops && hba->vops->setup_clocks)
+ ret = hba->vops->setup_clocks(hba, false);
+disable_clks:
+ ufshcd_setup_clocks(hba, false);
+out:
+ hba->pm_op_in_progress = 0;
+ return ret;
+}
+
+/**
+ * ufshcd_system_suspend - system suspend routine
+ * @hba: per adapter instance
+ * @pm_op: runtime PM or system PM
+ *
+ * Check the description of ufshcd_suspend() function for more details.
+ *
+ * Returns 0 for success and non-zero for failure
+ */
+int ufshcd_system_suspend(struct ufs_hba *hba)
+{
+ int ret = 0;
+
+ if (!hba || !hba->is_powered)
+ goto out;
+
+ if (pm_runtime_suspended(hba->dev)) {
+ if (hba->rpm_lvl == hba->spm_lvl)
+ /*
+ * There is possibility that device may still be in
+ * active state during the runtime suspend.
+ */
+ if ((ufs_get_pm_lvl_to_dev_pwr_mode(hba->spm_lvl) ==
+ hba->curr_dev_pwr_mode) && !hba->auto_bkops_enabled)
+ goto out;
+
+ /*
+ * UFS device and/or UFS link low power states during runtime
+ * suspend seems to be different than what is expected during
+ * system suspend. Hence runtime resume the devic & link and
+ * let the system suspend low power states to take effect.
+ * TODO: If resume takes longer time, we might have optimize
+ * it in future by not resuming everything if possible.
+ */
+ ret = ufshcd_runtime_resume(hba);
+ if (ret)
+ goto out;
+ }
+
+ ret = ufshcd_suspend(hba, UFS_SYSTEM_PM);
+out:
+ return ret;
+}
+EXPORT_SYMBOL(ufshcd_system_suspend);
+
+/**
+ * ufshcd_system_resume - system resume routine
+ * @hba: per adapter instance
+ *
+ * Returns 0 for success and non-zero for failure
+ */
+
+int ufshcd_system_resume(struct ufs_hba *hba)
+{
+ if (!hba || !hba->is_powered || pm_runtime_suspended(hba->dev))
+ /*
+ * Let the runtime resume take care of resuming
+ * if runtime suspended.
+ */
+ return 0;
+
+ return ufshcd_resume(hba, UFS_SYSTEM_PM);
+}
+EXPORT_SYMBOL(ufshcd_system_resume);
+
+/**
+ * ufshcd_runtime_suspend - runtime suspend routine
+ * @hba: per adapter instance
+ *
+ * Check the description of ufshcd_suspend() function for more details.
+ *
+ * Returns 0 for success and non-zero for failure
+ */
+int ufshcd_runtime_suspend(struct ufs_hba *hba)
+{
+ if (!hba || !hba->is_powered)
+ return 0;
+
+ return ufshcd_suspend(hba, UFS_RUNTIME_PM);
}
EXPORT_SYMBOL(ufshcd_runtime_suspend);
+/**
+ * ufshcd_runtime_resume - runtime resume routine
+ * @hba: per adapter instance
+ *
+ * This function basically brings the UFS device, UniPro link and controller
+ * to active state. Following operations are done in this function:
+ *
+ * 1. Turn on all the controller related clocks
+ * 2. Bring the UniPro link out of Hibernate state
+ * 3. If UFS device is in sleep state, turn ON VCC rail and bring the UFS device
+ * to active state.
+ * 4. If auto-bkops is enabled on the device, disable it.
+ *
+ * So following would be the possible power state after this function return
+ * successfully:
+ * S1: UFS device in Active state with VCC rail ON
+ * UniPro link in Active state
+ * All the UFS/UniPro controller clocks are ON
+ *
+ * Returns 0 for success and non-zero for failure
+ */
int ufshcd_runtime_resume(struct ufs_hba *hba)
{
- if (!hba)
+ if (!hba || !hba->is_powered)
return 0;
-
- return ufshcd_disable_auto_bkops(hba);
+ else
+ return ufshcd_resume(hba, UFS_RUNTIME_PM);
}
EXPORT_SYMBOL(ufshcd_runtime_resume);
@@ -4013,6 +4734,36 @@ int ufshcd_runtime_idle(struct ufs_hba *hba)
EXPORT_SYMBOL(ufshcd_runtime_idle);
/**
+ * ufshcd_shutdown - shutdown routine
+ * @hba: per adapter instance
+ *
+ * This function would power off both UFS device and UFS link.
+ *
+ * Returns 0 always to allow force shutdown even in case of errors.
+ */
+int ufshcd_shutdown(struct ufs_hba *hba)
+{
+ int ret = 0;
+
+ if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba))
+ goto out;
+
+ if (pm_runtime_suspended(hba->dev)) {
+ ret = ufshcd_runtime_resume(hba);
+ if (ret)
+ goto out;
+ }
+
+ ret = ufshcd_suspend(hba, UFS_SHUTDOWN_PM);
+out:
+ if (ret)
+ dev_err(hba->dev, "%s failed, err %d\n", __func__, ret);
+ /* allow force shutdown even in case of errors */
+ return 0;
+}
+EXPORT_SYMBOL(ufshcd_shutdown);
+
+/**
* ufshcd_remove - de-allocate SCSI host and host memory space
* data structure memory
* @hba - per adapter instance
@@ -4164,6 +4915,8 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
if (err) {
dev_err(hba->dev, "request irq failed\n");
goto out_disable;
+ } else {
+ hba->is_irq_enabled = true;
}
/* Enable SCSI tag mapping */
@@ -4189,6 +4942,12 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
/* Hold auto suspend until async scan completes */
pm_runtime_get_sync(dev);
+ /*
+ * The device-initialize-sequence hasn't been invoked yet.
+ * Set the device to power-off state
+ */
+ ufshcd_set_ufs_dev_poweroff(hba);
+
async_schedule(ufshcd_async_scan, hba);
return 0;
@@ -4196,6 +4955,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
out_remove_scsi_host:
scsi_remove_host(hba->host);
out_disable:
+ hba->is_irq_enabled = false;
scsi_host_put(host);
ufshcd_hba_exit(hba);
out_error:
@@ -96,6 +96,54 @@ struct uic_command {
struct completion done;
};
+/* Used to differentiate the power management options */
+enum ufs_pm_op {
+ UFS_RUNTIME_PM,
+ UFS_SYSTEM_PM,
+ UFS_SHUTDOWN_PM,
+};
+
+#define ufshcd_is_runtime_pm(op) ((op) == UFS_RUNTIME_PM)
+#define ufshcd_is_system_pm(op) ((op) == UFS_SYSTEM_PM)
+#define ufshcd_is_shutdown_pm(op) ((op) == UFS_SHUTDOWN_PM)
+
+/* Host <-> Device UniPro Link state */
+enum uic_link_state {
+ UIC_LINK_OFF_STATE = 0, /* Link powered down or disabled */
+ UIC_LINK_ACTIVE_STATE = 1, /* Link is in Fast/Slow/Sleep state */
+ UIC_LINK_HIBERN8_STATE = 2, /* Link is in Hibernate state */
+};
+
+#define ufshcd_is_link_off(hba) ((hba)->uic_link_state == UIC_LINK_OFF_STATE)
+#define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \
+ UIC_LINK_ACTIVE_STATE)
+#define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \
+ UIC_LINK_HIBERN8_STATE)
+#define ufshcd_set_link_off(hba) ((hba)->uic_link_state = UIC_LINK_OFF_STATE)
+#define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \
+ UIC_LINK_ACTIVE_STATE)
+#define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \
+ UIC_LINK_HIBERN8_STATE)
+
+/*
+ * UFS Power management levels.
+ * Each level is in increasing order of power savings.
+ */
+enum ufs_pm_level {
+ UFS_PM_LVL_0, /* UFS_ACTIVE_PWR_MODE, UIC_LINK_ACTIVE_STATE */
+ UFS_PM_LVL_1, /* UFS_ACTIVE_PWR_MODE, UIC_LINK_HIBERN8_STATE */
+ UFS_PM_LVL_2, /* UFS_SLEEP_PWR_MODE, UIC_LINK_ACTIVE_STATE */
+ UFS_PM_LVL_3, /* UFS_SLEEP_PWR_MODE, UIC_LINK_HIBERN8_STATE */
+ UFS_PM_LVL_4, /* UFS_POWERDOWN_PWR_MODE, UIC_LINK_HIBERN8_STATE */
+ UFS_PM_LVL_5, /* UFS_POWERDOWN_PWR_MODE, UIC_LINK_OFF_STATE */
+ UFS_PM_LVL_MAX
+};
+
+struct ufs_pm_lvl_states {
+ enum ufs_dev_pwr_mode dev_state;
+ enum uic_link_state link_state;
+};
+
/**
* struct ufshcd_lrb - local reference block
* @utr_descriptor_ptr: UTRD address of the command
@@ -184,6 +232,8 @@ struct ufs_clk_info {
* variant specific Uni-Pro initialization.
* @link_startup_notify: called before and after Link startup is carried out
* to allow variant specific Uni-Pro initialization.
+ * @suspend: called during host controller PM callback
+ * @resume: called during host controller PM callback
*/
struct ufs_hba_variant_ops {
const char *name;
@@ -193,6 +243,8 @@ struct ufs_hba_variant_ops {
int (*setup_regulators)(struct ufs_hba *, bool);
int (*hce_enable_notify)(struct ufs_hba *, bool);
int (*link_startup_notify)(struct ufs_hba *, bool);
+ int (*suspend)(struct ufs_hba *, enum ufs_pm_op);
+ int (*resume)(struct ufs_hba *, enum ufs_pm_op);
};
/**
@@ -274,6 +326,14 @@ struct ufs_hba {
struct scsi_device *sdev_rpmb;
struct scsi_device *sdev_boot;
+ enum ufs_dev_pwr_mode curr_dev_pwr_mode;
+ enum uic_link_state uic_link_state;
+ /* Desired UFS power management level during runtime PM */
+ enum ufs_pm_level rpm_lvl;
+ /* Desired UFS power management level during system PM */
+ enum ufs_pm_level spm_lvl;
+ int pm_op_in_progress;
+
struct ufshcd_lrb *lrb;
unsigned long lrb_in_use;
@@ -287,16 +347,17 @@ struct ufs_hba {
struct ufs_hba_variant_ops *vops;
void *priv;
unsigned int irq;
+ bool is_irq_enabled;
- struct uic_command *active_uic_cmd;
- struct mutex uic_cmd_mutex;
wait_queue_head_t tm_wq;
wait_queue_head_t tm_tag_wq;
unsigned long tm_condition;
unsigned long tm_slots_in_use;
- struct completion *pwr_done;
+ struct uic_command *active_uic_cmd;
+ struct mutex uic_cmd_mutex;
+ struct completion *uic_async_done;
u32 ufshcd_state;
u32 eh_flags;
@@ -319,9 +380,13 @@ struct ufs_hba {
/* Device management request data */
struct ufs_dev_cmd dev_cmd;
+ /* Keeps information of the UFS device connected to this host */
+ struct ufs_dev_info dev_info;
bool auto_bkops_enabled;
struct ufs_vreg_info vreg_info;
struct list_head clk_list_head;
+
+ bool wlun_dev_clr_ua;
};
#define ufshcd_writel(hba, val, reg) \
@@ -348,11 +413,12 @@ static inline void check_upiu_size(void)
GENERAL_UPIU_REQUEST_SIZE + QUERY_DESC_MAX_SIZE);
}
-extern int ufshcd_suspend(struct ufs_hba *hba, pm_message_t state);
-extern int ufshcd_resume(struct ufs_hba *hba);
extern int ufshcd_runtime_suspend(struct ufs_hba *hba);
extern int ufshcd_runtime_resume(struct ufs_hba *hba);
extern int ufshcd_runtime_idle(struct ufs_hba *hba);
+extern int ufshcd_system_suspend(struct ufs_hba *hba);
+extern int ufshcd_system_resume(struct ufs_hba *hba);
+extern int ufshcd_shutdown(struct ufs_hba *hba);
extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
u8 attr_set, u32 mib_val, u8 peer);
extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
@@ -124,8 +124,11 @@ enum {
#define CONTROLLER_FATAL_ERROR UFS_BIT(16)
#define SYSTEM_BUS_FATAL_ERROR UFS_BIT(17)
-#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL |\
- UIC_POWER_MODE)
+#define UFSHCD_UIC_PWR_MASK (UIC_HIBERNATE_ENTER |\
+ UIC_HIBERNATE_EXIT |\
+ UIC_POWER_MODE)
+
+#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK)
#define UFSHCD_ERROR_MASK (UIC_ERROR |\
DEVICE_FATAL_ERROR |\
@@ -210,7 +213,7 @@ enum {
#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF)
/* UIC Commands */
-enum {
+enum uic_cmd_dme {
UIC_CMD_DME_GET = 0x01,
UIC_CMD_DME_SET = 0x02,
UIC_CMD_DME_PEER_GET = 0x03,