diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 88bdc8f..af6e10b 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -206,6 +206,20 @@ config NAU7802
 	  To compile this driver as a module, choose M here: the
 	  module will be called nau7802.
 
+config QCOM_SPMI_VADC
+	tristate "Qualcomm SPMI PMIC voltage ADC"
+	depends on SPMI
+	select REGMAP_SPMI
+	help
+	  This is the IIO Voltage ADC driver for Qualcomm QPNP VADC Chip.
+
+	  The driver supports multiple channels read. The VADC is a 15-bit
+	  sigma-delta ADC. Some of the channels are internally used for
+	  calibration.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called qcom-spmi-vadc.
+
 config ROCKCHIP_SARADC
 	tristate "Rockchip SARADC driver"
 	depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index cb88a6a..479b457 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_MCP320X) += mcp320x.o
 obj-$(CONFIG_MCP3422) += mcp3422.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
+obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
 obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
 obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
new file mode 100644
index 0000000..6e6881c
--- /dev/null
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -0,0 +1,1015 @@
+/*
+ * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/log2.h>
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+/* VADC register and bit definitions */
+#define VADC_REVISION2				0x1
+#define VADC_REVISION2_SUPPORTED_VADC		1
+
+#define VADC_PERPH_TYPE				0x4
+#define VADC_PERPH_TYPE_ADC			8
+
+#define VADC_PERPH_SUBTYPE			0x5
+#define VADC_PERPH_SUBTYPE_VADC			1
+
+#define VADC_STATUS1				0x8
+#define VADC_STATUS1_OP_MODE			4
+#define VADC_STATUS1_REQ_STS			BIT(1)
+#define VADC_STATUS1_EOC			BIT(0)
+#define VADC_STATUS1_REQ_STS_EOC_MASK		0x3
+
+#define VADC_MODE_CTL				0x40
+#define VADC_OP_MODE_SHIFT			3
+#define VADC_OP_MODE_NORMAL			0
+#define VADC_AMUX_TRIM_EN			BIT(1)
+#define VADC_ADC_TRIM_EN			BIT(0)
+
+#define VADC_EN_CTL1				0x46
+#define VADC_EN_CTL1_SET			BIT(7)
+
+#define VADC_ADC_CH_SEL_CTL			0x48
+
+#define VADC_ADC_DIG_PARAM			0x50
+#define VADC_ADC_DIG_DEC_RATIO_SEL_SHIFT	2
+
+#define VADC_HW_SETTLE_DELAY			0x51
+
+#define VADC_CONV_REQ				0x52
+#define VADC_CONV_REQ_SET			BIT(7)
+
+#define VADC_FAST_AVG_CTL			0x5a
+#define VADC_FAST_AVG_EN			0x5b
+#define VADC_FAST_AVG_EN_SET			BIT(7)
+
+#define VADC_ACCESS				0xd0
+#define VADC_ACCESS_DATA			0xa5
+
+#define VADC_PERH_RESET_CTL3			0xda
+#define VADC_FOLLOW_WARM_RB			BIT(2)
+
+#define VADC_DATA				0x60	/* 16 bits */
+
+#define VADC_CONV_TIME_MIN_US			2000
+#define VADC_CONV_TIME_MAX_US			2100
+
+/* Min ADC code represents 0V */
+#define VADC_MIN_ADC_CODE			0x6000
+/* Max ADC code represents full-scale range of 1.8V */
+#define VADC_MAX_ADC_CODE			0xa800
+
+#define VADC_ABSOLUTE_RANGE_UV			625000
+#define VADC_RATIOMETRIC_RANGE_UV		1800000
+
+#define VADC_DEF_PRESCALING			0 /* 1:1 */
+#define VADC_DEF_DECIMATION			0 /* 512 */
+#define VADC_DEF_HW_SETTLE_TIME			0 /* 0 us */
+#define VADC_DEF_AVG_SAMPLES			0 /* 1 sample */
+#define VADC_DEF_CALIB_TYPE			VADC_CALIB_ABSOLUTE
+
+#define VADC_DECIMATION_MIN			512
+#define VADC_DECIMATION_MAX			4096
+
+#define VADC_HW_SETTLE_DELAY_MAX		10000
+#define VADC_AVG_SAMPLES_MAX			512
+
+#define KELVINMIL_CELSIUSMIL			273150
+
+#define VADC_CHAN_MIN			VADC_USBIN
+#define VADC_CHAN_MAX			VADC_LR_MUX3_BUF_PU1_PU2_XO_THERM
+
+/*
+ * VADC_CALIB_ABSOLUTE: uses the 625mV and 1.25V as reference channels.
+ * VADC_CALIB_RATIOMETRIC: uses the reference voltage (1.8V) and GND for
+ * calibration.
+ */
+enum vadc_calibration {
+	VADC_CALIB_ABSOLUTE = 0,
+	VADC_CALIB_RATIOMETRIC
+};
+
+/**
+ * struct vadc_linear_graph - Represent ADC characteristics.
+ * @dy: numerator slope to calculate the gain.
+ * @dx: denominator slope to calculate the gain.
+ * @vref: A/D word of the voltage reference used for the channel.
+ * @gnd: A/D word of the ground reference used for the channel.
+ *
+ * Each ADC device has different offset and gain parameters which are
+ * computed to calibrate the device.
+ */
+struct vadc_linear_graph {
+	s32 dy;
+	s32 dx;
+	s32 vref;
+	s32 gnd;
+};
+
+/**
+ * struct vadc_prescale_ratio - Represent scaling ratio for ADC input.
+ * @num: the inverse numerator of the gain applied to the input channel.
+ * @den: the inverse denominator of the gain applied to the input channel.
+ */
+struct vadc_prescale_ratio {
+	u32 num;
+	u32 den;
+};
+
+/**
+ * struct vadc_channel_prop - VADC channel property.
+ * @channel: channel number, refer to the channel list.
+ * @calibration: calibration type.
+ * @decimation: sampling rate supported for the channel.
+ * @prescale: channel scaling performed on the input signal.
+ * @hw_settle_time: the time between AMUX being configured and the
+ *	start of conversion.
+ * @avg_samples: ability to provide single result from the ADC
+ *	that is an average of multiple measurements.
+ */
+struct vadc_channel_prop {
+	unsigned int channel;
+	enum vadc_calibration calibration;
+	unsigned int decimation;
+	unsigned int prescale;
+	unsigned int hw_settle_time;
+	unsigned int avg_samples;
+};
+
+/**
+ * struct vadc_priv - VADC private structure.
+ * @regmap: pointer to struct regmap.
+ * @dev: pointer to struct device.
+ * @base: base address for the ADC peripheral.
+ * @nchannels: number of VADC channels.
+ * @chan_props: array of VADC channel properties.
+ * @iio_chans: array of IIO channels specification.
+ * @are_ref_measured: are reference points measured.
+ * @poll_eoc: use polling instead of interrupt.
+ * @complete: VADC result notification after interrupt is received.
+ * @graph: store parameters for calibration.
+ */
+struct vadc_priv {
+	struct regmap		 *regmap;
+	struct device		 *dev;
+	u16			 base;
+	unsigned int		 nchannels;
+	struct vadc_channel_prop *chan_props;
+	struct iio_chan_spec	 *iio_chans;
+	bool			 are_ref_measured;
+	bool			 poll_eoc;
+	struct completion	 complete;
+	struct vadc_linear_graph graph[2];
+};
+
+static const struct vadc_prescale_ratio vadc_prescale_ratios[] = {
+	{.num =  1, .den =  1},
+	{.num =  1, .den =  3},
+	{.num =  1, .den =  4},
+	{.num =  1, .den =  6},
+	{.num =  1, .den = 20},
+	{.num =  1, .den =  8},
+	{.num = 10, .den = 81},
+	{.num =  1, .den = 10}
+};
+
+static int vadc_read(struct vadc_priv *vadc, u16 offset, u8 *data)
+{
+	return regmap_bulk_read(vadc->regmap, vadc->base + offset, data, 1);
+}
+
+static int vadc_write(struct vadc_priv *vadc, u16 offset, u8 data)
+{
+	return regmap_write(vadc->regmap, vadc->base + offset, data);
+}
+
+static int vadc_reset(struct vadc_priv *vadc)
+{
+	u8 data;
+	int ret;
+
+	ret = vadc_write(vadc, VADC_ACCESS, VADC_ACCESS_DATA);
+	if (ret)
+		return ret;
+
+	ret = vadc_read(vadc, VADC_PERH_RESET_CTL3, &data);
+	if (ret)
+		return ret;
+
+	ret = vadc_write(vadc, VADC_ACCESS, VADC_ACCESS_DATA);
+	if (ret)
+		return ret;
+
+	data |= VADC_FOLLOW_WARM_RB;
+
+	return vadc_write(vadc, VADC_PERH_RESET_CTL3, data);
+}
+
+static int vadc_set_state(struct vadc_priv *vadc, bool state)
+{
+	return vadc_write(vadc, VADC_EN_CTL1, state ? VADC_EN_CTL1_SET : 0);
+}
+
+static void vadc_show_status(struct vadc_priv *vadc)
+{
+	u8 mode, sta1, chan, dig, en, req;
+	int ret;
+
+	ret = vadc_read(vadc, VADC_MODE_CTL, &mode);
+	if (ret)
+		return;
+
+	ret = vadc_read(vadc, VADC_ADC_DIG_PARAM, &dig);
+	if (ret)
+		return;
+
+	ret = vadc_read(vadc, VADC_ADC_CH_SEL_CTL, &chan);
+	if (ret)
+		return;
+
+	ret = vadc_read(vadc, VADC_CONV_REQ, &req);
+	if (ret)
+		return;
+
+	ret = vadc_read(vadc, VADC_STATUS1, &sta1);
+	if (ret)
+		return;
+
+	ret = vadc_read(vadc, VADC_EN_CTL1, &en);
+	if (ret)
+		return;
+
+	dev_err(vadc->dev,
+		"mode:%02x en:%02x chan:%02x dig:%02x req:%02x sta1:%02x\n",
+		mode, en, chan, dig, req, sta1);
+}
+
+static int vadc_configure(struct vadc_priv *vadc,
+			  struct vadc_channel_prop *prop)
+{
+	u8 decimation, mode_ctrl;
+	int ret;
+
+	/* Mode selection */
+	mode_ctrl = (VADC_OP_MODE_NORMAL << VADC_OP_MODE_SHIFT) |
+		     VADC_ADC_TRIM_EN | VADC_AMUX_TRIM_EN;
+	ret = vadc_write(vadc, VADC_MODE_CTL, mode_ctrl);
+	if (ret)
+		return ret;
+
+	/* Channel selection */
+	ret = vadc_write(vadc, VADC_ADC_CH_SEL_CTL, prop->channel);
+	if (ret)
+		return ret;
+
+	/* Digital parameter setup */
+	decimation = prop->decimation << VADC_ADC_DIG_DEC_RATIO_SEL_SHIFT;
+	ret = vadc_write(vadc, VADC_ADC_DIG_PARAM, decimation);
+	if (ret)
+		return ret;
+
+	/* HW settle time delay */
+	ret = vadc_write(vadc, VADC_HW_SETTLE_DELAY, prop->hw_settle_time);
+	if (ret)
+		return ret;
+
+	ret = vadc_write(vadc, VADC_FAST_AVG_CTL, prop->avg_samples);
+	if (ret)
+		return ret;
+
+	if (prop->avg_samples)
+		ret = vadc_write(vadc, VADC_FAST_AVG_EN, VADC_FAST_AVG_EN_SET);
+	else
+		ret = vadc_write(vadc, VADC_FAST_AVG_EN, 0);
+
+	return ret;
+}
+
+static int vadc_poll_wait_eoc(struct vadc_priv *vadc, unsigned int interval_us)
+{
+	unsigned int count, retry;
+	u8 sta1;
+	int ret;
+
+	retry = interval_us / VADC_CONV_TIME_MIN_US;
+
+	for (count = 0; count < retry; count++) {
+		ret = vadc_read(vadc, VADC_STATUS1, &sta1);
+		if (ret)
+			return ret;
+
+		sta1 &= VADC_STATUS1_REQ_STS_EOC_MASK;
+		if (sta1 == VADC_STATUS1_EOC)
+			return 0;
+
+		usleep_range(VADC_CONV_TIME_MIN_US, VADC_CONV_TIME_MAX_US);
+	}
+
+	vadc_show_status(vadc);
+
+	return -ETIMEDOUT;
+}
+
+static int vadc_read_result(struct vadc_priv *vadc, u16 *data)
+{
+	int ret;
+
+	ret = regmap_bulk_read(vadc->regmap, vadc->base + VADC_DATA, data, 2);
+	if (ret)
+		return ret;
+
+	*data = clamp_t(u16, *data, VADC_MIN_ADC_CODE, VADC_MAX_ADC_CODE);
+	return 0;
+}
+
+static struct vadc_channel_prop *vadc_get_channel(struct vadc_priv *vadc,
+						  unsigned int num)
+{
+	unsigned int i;
+
+	for (i = 0; i < vadc->nchannels; i++)
+		if (vadc->chan_props[i].channel == num)
+			return &vadc->chan_props[i];
+
+	dev_dbg(vadc->dev, "no such channel %02x\n", num);
+
+	return NULL;
+}
+
+static int vadc_do_conversion(struct vadc_priv *vadc,
+			      struct vadc_channel_prop *prop, u16 *data)
+{
+	unsigned int timeout;
+	int ret;
+
+	ret = vadc_configure(vadc, prop);
+	if (ret)
+		return ret;
+
+	if (!vadc->poll_eoc)
+		reinit_completion(&vadc->complete);
+
+	ret = vadc_set_state(vadc, true);
+	if (ret)
+		return ret;
+
+	ret = vadc_write(vadc, VADC_CONV_REQ, VADC_CONV_REQ_SET);
+	if (ret)
+		goto err_disable;
+
+	timeout = BIT(prop->avg_samples) * VADC_CONV_TIME_MIN_US * 2;
+
+	if (vadc->poll_eoc) {
+		ret = vadc_poll_wait_eoc(vadc, timeout);
+	} else {
+		ret = wait_for_completion_timeout(&vadc->complete, timeout);
+		if (!ret) {
+			ret = -ETIMEDOUT;
+			goto err_disable;
+		}
+
+		/* Double check conversion status */
+		ret = vadc_poll_wait_eoc(vadc, VADC_CONV_TIME_MIN_US);
+		if (ret)
+			goto err_disable;
+	}
+
+	ret = vadc_read_result(vadc, data);
+
+err_disable:
+	vadc_set_state(vadc, false);
+	if (ret)
+		dev_err(vadc->dev, "conversion failed\n");
+
+	return ret;
+}
+
+static int vadc_measure_ref_points(struct vadc_priv *vadc)
+{
+	struct vadc_channel_prop *prop;
+	u16 read_1, read_2;
+	int ret;
+
+	vadc->graph[VADC_CALIB_RATIOMETRIC].dx = VADC_RATIOMETRIC_RANGE_UV;
+	vadc->graph[VADC_CALIB_ABSOLUTE].dx = VADC_ABSOLUTE_RANGE_UV;
+
+	prop = vadc_get_channel(vadc, VADC_REF_1250MV);
+	ret = vadc_do_conversion(vadc, prop, &read_1);
+	if (ret)
+		goto err;
+
+	/* Try with buffered 625mV channel first */
+	prop = vadc_get_channel(vadc, VADC_SPARE1);
+	if (!prop)
+		prop = vadc_get_channel(vadc, VADC_REF_625MV);
+
+	ret = vadc_do_conversion(vadc, prop, &read_2);
+	if (ret)
+		goto err;
+
+	if (read_1 == read_2) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	vadc->graph[VADC_CALIB_ABSOLUTE].dy = read_1 - read_2;
+	vadc->graph[VADC_CALIB_ABSOLUTE].vref = read_1;
+	vadc->graph[VADC_CALIB_ABSOLUTE].gnd = read_2;
+
+	/* Ratiometric calibration */
+	prop = vadc_get_channel(vadc, VADC_VDD_VADC);
+	ret = vadc_do_conversion(vadc, prop, &read_1);
+	if (ret)
+		goto err;
+
+	prop = vadc_get_channel(vadc, VADC_GND_REF);
+	ret = vadc_do_conversion(vadc, prop, &read_2);
+	if (ret)
+		goto err;
+
+	if (read_1 == read_2) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	vadc->graph[VADC_CALIB_RATIOMETRIC].dy = read_1 - read_2;
+	vadc->graph[VADC_CALIB_RATIOMETRIC].vref = read_1;
+	vadc->graph[VADC_CALIB_RATIOMETRIC].gnd = read_2;
+err:
+	if (ret)
+		dev_err(vadc->dev, "measure reference points failed\n");
+
+	return ret;
+}
+
+static s32 vadc_calibrate(struct vadc_priv *vadc,
+			  const struct vadc_channel_prop *prop, u16 adc_code)
+{
+	const struct vadc_prescale_ratio *prescale;
+	s32 voltage;
+
+	voltage = adc_code - vadc->graph[prop->calibration].gnd;
+	voltage *= vadc->graph[prop->calibration].dx;
+	voltage = voltage / vadc->graph[prop->calibration].dy;
+
+	if (prop->calibration == VADC_CALIB_ABSOLUTE)
+		voltage += vadc->graph[prop->calibration].dx;
+
+	if (voltage < 0)
+		voltage = 0;
+
+	prescale = &vadc_prescale_ratios[prop->prescale];
+
+	voltage = voltage * prescale->den;
+
+	return voltage / prescale->num;
+}
+
+static int vadc_decimation_from_dt(u32 value)
+{
+	if (!is_power_of_2(value) || value < VADC_DECIMATION_MIN ||
+	    value > VADC_DECIMATION_MAX)
+		return -EINVAL;
+
+	return __ffs64(value / VADC_DECIMATION_MIN);
+}
+
+static int vadc_prescaling_from_dt(u32 num, u32 den)
+{
+	unsigned int pre;
+
+	for (pre = 0; pre < ARRAY_SIZE(vadc_prescale_ratios); pre++)
+		if (vadc_prescale_ratios[pre].num == num &&
+		    vadc_prescale_ratios[pre].den == den)
+			break;
+
+	if (pre == ARRAY_SIZE(vadc_prescale_ratios))
+		return -EINVAL;
+
+	return pre;
+}
+
+static int vadc_hw_settle_time_from_dt(u32 value)
+{
+	if ((value <= 1000 && value % 100) || (value > 1000 && value % 2000))
+		return -EINVAL;
+
+	if (value <= 1000)
+		value /= 100;
+	else
+		value = value / 2000 + 10;
+
+	return value;
+}
+
+static int vadc_avg_samples_from_dt(u32 value)
+{
+	if (!is_power_of_2(value) || value > VADC_AVG_SAMPLES_MAX)
+		return -EINVAL;
+
+	return __ffs64(value);
+}
+
+static int vadc_read_raw(struct iio_dev *indio_dev,
+			 struct iio_chan_spec const *chan, int *val, int *val2,
+			 long mask)
+{
+	struct vadc_priv *vadc = iio_priv(indio_dev);
+	struct vadc_channel_prop *prop;
+	u16 adc_code;
+	int ret;
+
+	if (!vadc->are_ref_measured) {
+		ret = vadc_measure_ref_points(vadc);
+		if (ret)
+			return ret;
+
+		vadc->are_ref_measured = true;
+	}
+
+	if (mask == IIO_CHAN_INFO_PROCESSED || mask == IIO_CHAN_INFO_RAW) {
+		prop = &vadc->chan_props[chan->address];
+		ret = vadc_do_conversion(vadc, prop, &adc_code);
+		if (ret)
+			return ret;
+
+		*val = vadc_calibrate(vadc, prop, adc_code);
+	}
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		if (chan->type != IIO_TEMP && chan->channel != VADC_DIE_TEMP)
+			return -EINVAL;
+
+		/* 2mV/K, return milli Celsius */
+		*val /= 2;
+		*val -= KELVINMIL_CELSIUSMIL;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_RAW:
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int vadc_of_xlate(struct iio_dev *indio_dev,
+			 const struct of_phandle_args *iiospec)
+{
+	struct vadc_priv *vadc = iio_priv(indio_dev);
+	unsigned int i;
+
+	for (i = 0; i < vadc->nchannels; i++)
+		if (vadc->iio_chans[i].channel == iiospec->args[0])
+			return i;
+
+	return -EINVAL;
+}
+
+static const struct iio_info vadc_info = {
+	.read_raw = vadc_read_raw,
+	.of_xlate = vadc_of_xlate,
+	.driver_module = THIS_MODULE,
+};
+
+struct vadc_channels {
+	const char *datasheet_name;
+	unsigned int prescale_index;
+	enum iio_chan_type type;
+	long info_mask;
+};
+
+#define VADC_CHAN(_dname, _type, _mask, _pre)				\
+	[VADC_##_dname] = {						\
+		.datasheet_name = __stringify(_dname),			\
+		.prescale_index = _pre,					\
+		.type = _type,						\
+		.info_mask = _mask					\
+	},								\
+
+#define VADC_CHAN_TEMP(_dname, _pre)					\
+	VADC_CHAN(_dname, IIO_TEMP, BIT(IIO_CHAN_INFO_PROCESSED), _pre)	\
+
+#define VADC_CHAN_VOLT(_dname, _pre)					\
+	VADC_CHAN(_dname, IIO_VOLTAGE,					\
+		  BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),	\
+		  _pre)							\
+
+/*
+ * The array represents all possible ADC channels found in the supported PMICs.
+ * Every index in the array is equal to the channel number per datasheet. The
+ * gaps in the array should be treated as reserved channels.
+ */
+static const struct vadc_channels vadc_chans[] = {
+	VADC_CHAN_VOLT(USBIN, 4)
+	VADC_CHAN_VOLT(DCIN, 4)
+	VADC_CHAN_VOLT(VCHG_SNS, 3)
+	VADC_CHAN_VOLT(SPARE1_03, 1)
+	VADC_CHAN_VOLT(USB_ID_MV, 1)
+	VADC_CHAN_VOLT(VCOIN, 1)
+	VADC_CHAN_VOLT(VBAT_SNS, 1)
+	VADC_CHAN_VOLT(VSYS, 1)
+	VADC_CHAN_TEMP(DIE_TEMP, 0)
+	VADC_CHAN_VOLT(REF_625MV, 0)
+	VADC_CHAN_VOLT(REF_1250MV, 0)
+	VADC_CHAN_VOLT(CHG_TEMP, 0)
+	VADC_CHAN_VOLT(SPARE1, 0)
+	VADC_CHAN_VOLT(SPARE2, 0)
+	VADC_CHAN_VOLT(GND_REF, 0)
+	VADC_CHAN_VOLT(VDD_VADC, 0)
+
+	VADC_CHAN_VOLT(P_MUX1_1_1, 0)
+	VADC_CHAN_VOLT(P_MUX2_1_1, 0)
+	VADC_CHAN_VOLT(P_MUX3_1_1, 0)
+	VADC_CHAN_VOLT(P_MUX4_1_1, 0)
+	VADC_CHAN_VOLT(P_MUX5_1_1, 0)
+	VADC_CHAN_VOLT(P_MUX6_1_1, 0)
+	VADC_CHAN_VOLT(P_MUX7_1_1, 0)
+	VADC_CHAN_VOLT(P_MUX8_1_1, 0)
+	VADC_CHAN_VOLT(P_MUX9_1_1, 0)
+	VADC_CHAN_VOLT(P_MUX10_1_1, 0)
+	VADC_CHAN_VOLT(P_MUX11_1_1, 0)
+	VADC_CHAN_VOLT(P_MUX12_1_1, 0)
+	VADC_CHAN_VOLT(P_MUX13_1_1, 0)
+	VADC_CHAN_VOLT(P_MUX14_1_1, 0)
+	VADC_CHAN_VOLT(P_MUX15_1_1, 0)
+	VADC_CHAN_VOLT(P_MUX16_1_1, 0)
+
+	VADC_CHAN_VOLT(P_MUX1_1_3, 1)
+	VADC_CHAN_VOLT(P_MUX2_1_3, 1)
+	VADC_CHAN_VOLT(P_MUX3_1_3, 1)
+	VADC_CHAN_VOLT(P_MUX4_1_3, 1)
+	VADC_CHAN_VOLT(P_MUX5_1_3, 1)
+	VADC_CHAN_VOLT(P_MUX6_1_3, 1)
+	VADC_CHAN_VOLT(P_MUX7_1_3, 1)
+	VADC_CHAN_VOLT(P_MUX8_1_3, 1)
+	VADC_CHAN_VOLT(P_MUX9_1_3, 1)
+	VADC_CHAN_VOLT(P_MUX10_1_3, 1)
+	VADC_CHAN_VOLT(P_MUX11_1_3, 1)
+	VADC_CHAN_VOLT(P_MUX12_1_3, 1)
+	VADC_CHAN_VOLT(P_MUX13_1_3, 1)
+	VADC_CHAN_VOLT(P_MUX14_1_3, 1)
+	VADC_CHAN_VOLT(P_MUX15_1_3, 1)
+	VADC_CHAN_VOLT(P_MUX16_1_3, 1)
+
+	VADC_CHAN_VOLT(LR_MUX1_BAT_THERM, 0)
+	VADC_CHAN_VOLT(LR_MUX2_BAT_ID, 0)
+	VADC_CHAN_VOLT(LR_MUX3_XO_THERM, 0)
+	VADC_CHAN_VOLT(LR_MUX4_AMUX_THM1, 0)
+	VADC_CHAN_VOLT(LR_MUX5_AMUX_THM2, 0)
+	VADC_CHAN_VOLT(LR_MUX6_AMUX_THM3, 0)
+	VADC_CHAN_VOLT(LR_MUX7_HW_ID, 0)
+	VADC_CHAN_VOLT(LR_MUX8_AMUX_THM4, 0)
+	VADC_CHAN_VOLT(LR_MUX9_AMUX_THM5, 0)
+	VADC_CHAN_VOLT(LR_MUX10_USB_ID, 0)
+	VADC_CHAN_VOLT(AMUX_PU1, 0)
+	VADC_CHAN_VOLT(AMUX_PU2, 0)
+	VADC_CHAN_VOLT(LR_MUX3_BUF_XO_THERM, 0)
+
+	VADC_CHAN_VOLT(LR_MUX1_PU1_BAT_THERM, 0)
+	VADC_CHAN_VOLT(LR_MUX2_PU1_BAT_ID, 0)
+	VADC_CHAN_VOLT(LR_MUX3_PU1_XO_THERM, 0)
+	VADC_CHAN_VOLT(LR_MUX4_PU1_AMUX_THM1, 0)
+	VADC_CHAN_VOLT(LR_MUX5_PU1_AMUX_THM2, 0)
+	VADC_CHAN_VOLT(LR_MUX6_PU1_AMUX_THM3, 0)
+	VADC_CHAN_VOLT(LR_MUX7_PU1_AMUX_HW_ID, 0)
+	VADC_CHAN_VOLT(LR_MUX8_PU1_AMUX_THM4, 0)
+	VADC_CHAN_VOLT(LR_MUX9_PU1_AMUX_THM5, 0)
+	VADC_CHAN_VOLT(LR_MUX10_PU1_AMUX_USB_ID, 0)
+	VADC_CHAN_VOLT(LR_MUX3_BUF_PU1_XO_THERM, 0)
+
+	VADC_CHAN_VOLT(LR_MUX1_PU2_BAT_THERM, 0)
+	VADC_CHAN_VOLT(LR_MUX2_PU2_BAT_ID, 0)
+	VADC_CHAN_VOLT(LR_MUX3_PU2_XO_THERM, 0)
+	VADC_CHAN_VOLT(LR_MUX4_PU2_AMUX_THM1, 0)
+	VADC_CHAN_VOLT(LR_MUX5_PU2_AMUX_THM2, 0)
+	VADC_CHAN_VOLT(LR_MUX6_PU2_AMUX_THM3, 0)
+	VADC_CHAN_VOLT(LR_MUX7_PU2_AMUX_HW_ID, 0)
+	VADC_CHAN_VOLT(LR_MUX8_PU2_AMUX_THM4, 0)
+	VADC_CHAN_VOLT(LR_MUX9_PU2_AMUX_THM5, 0)
+	VADC_CHAN_VOLT(LR_MUX10_PU2_AMUX_USB_ID, 0)
+	VADC_CHAN_VOLT(LR_MUX3_BUF_PU2_XO_THERM, 0)
+
+	VADC_CHAN_VOLT(LR_MUX1_PU1_PU2_BAT_THERM, 0)
+	VADC_CHAN_VOLT(LR_MUX2_PU1_PU2_BAT_ID, 0)
+	VADC_CHAN_VOLT(LR_MUX3_PU1_PU2_XO_THERM, 0)
+	VADC_CHAN_VOLT(LR_MUX4_PU1_PU2_AMUX_THM1, 0)
+	VADC_CHAN_VOLT(LR_MUX5_PU1_PU2_AMUX_THM2, 0)
+	VADC_CHAN_VOLT(LR_MUX6_PU1_PU2_AMUX_THM3, 0)
+	VADC_CHAN_VOLT(LR_MUX7_PU1_PU2_AMUX_HW_ID, 0)
+	VADC_CHAN_VOLT(LR_MUX8_PU1_PU2_AMUX_THM4, 0)
+	VADC_CHAN_VOLT(LR_MUX9_PU1_PU2_AMUX_THM5, 0)
+	VADC_CHAN_VOLT(LR_MUX10_PU1_PU2_AMUX_USB_ID, 0)
+	VADC_CHAN_VOLT(LR_MUX3_BUF_PU1_PU2_XO_THERM, 0)
+};
+
+static int vadc_get_dt_channel_data(struct device *dev,
+				    struct vadc_channel_prop *prop,
+				    struct device_node *node)
+{
+	const char *name = node->name;
+	u32 chan, value, varr[2];
+	int ret;
+
+	ret = of_property_read_u32(node, "reg", &chan);
+	if (ret) {
+		dev_err(dev, "invalid channel number %s\n", name);
+		return ret;
+	}
+
+	if (chan > VADC_CHAN_MAX || chan < VADC_CHAN_MIN) {
+		dev_err(dev, "%s invalid channel number %d\n", name, chan);
+		return -EINVAL;
+	}
+
+	/* the channel has DT description */
+	prop->channel = chan;
+
+	ret = of_property_read_u32(node, "qcom,decimation", &value);
+	if (!ret) {
+		ret = vadc_decimation_from_dt(value);
+		if (ret < 0) {
+			dev_err(dev, "%02x invalid decimation %d\n",
+				chan, value);
+			return ret;
+		}
+		prop->decimation = ret;
+	} else {
+		prop->decimation = VADC_DEF_DECIMATION;
+	}
+
+	ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2);
+	if (!ret) {
+		ret = vadc_prescaling_from_dt(varr[0], varr[1]);
+		if (ret < 0) {
+			dev_err(dev, "%02x invalid pre-scaling <%d %d>\n",
+				chan, varr[0], varr[1]);
+			return ret;
+		}
+		prop->prescale = ret;
+	} else {
+		prop->prescale = vadc_chans[prop->channel].prescale_index;
+	}
+
+	ret = of_property_read_u32(node, "qcom,hw-settle-time", &value);
+	if (!ret) {
+		ret = vadc_hw_settle_time_from_dt(value);
+		if (ret < 0) {
+			dev_err(dev, "%02x invalid hw-settle-time %d us\n",
+				chan, value);
+			return ret;
+		}
+		prop->hw_settle_time = ret;
+	} else {
+		prop->hw_settle_time = VADC_DEF_HW_SETTLE_TIME;
+	}
+
+	ret = of_property_read_u32(node, "qcom,avg-samples", &value);
+	if (!ret) {
+		ret = vadc_avg_samples_from_dt(value);
+		if (ret < 0) {
+			dev_err(dev, "%02x invalid avg-samples %d\n",
+				chan, value);
+			return ret;
+		}
+		prop->avg_samples = ret;
+	} else {
+		prop->avg_samples = VADC_DEF_AVG_SAMPLES;
+	}
+
+	if (of_property_read_bool(node, "qcom,ratiometric"))
+		prop->calibration = VADC_CALIB_RATIOMETRIC;
+	else
+		prop->calibration = VADC_CALIB_ABSOLUTE;
+
+	dev_dbg(dev, "%02x name %s\n", chan, name);
+
+	return 0;
+}
+
+static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node)
+{
+	const struct vadc_channels *vadc_chan;
+	struct iio_chan_spec *iio_chan;
+	struct vadc_channel_prop prop;
+	struct device_node *child;
+	unsigned int index = 0;
+	int ret;
+
+	vadc->nchannels = of_get_available_child_count(node);
+	if (!vadc->nchannels)
+		return -EINVAL;
+
+	vadc->iio_chans = devm_kcalloc(vadc->dev, vadc->nchannels,
+				       sizeof(*vadc->iio_chans), GFP_KERNEL);
+	if (!vadc->iio_chans)
+		return -ENOMEM;
+
+	vadc->chan_props = devm_kcalloc(vadc->dev, vadc->nchannels,
+					sizeof(*vadc->chan_props), GFP_KERNEL);
+	if (!vadc->chan_props)
+		return -ENOMEM;
+
+	iio_chan = vadc->iio_chans;
+
+	for_each_available_child_of_node(node, child) {
+		ret = vadc_get_dt_channel_data(vadc->dev, &prop, child);
+		if (ret)
+			return ret;
+
+		vadc->chan_props[index] = prop;
+
+		vadc_chan = &vadc_chans[prop.channel];
+
+		iio_chan->channel = prop.channel;
+		iio_chan->datasheet_name = vadc_chan->datasheet_name;
+		iio_chan->info_mask_separate = vadc_chan->info_mask;
+		iio_chan->type = vadc_chan->type;
+		iio_chan->indexed = 1;
+		iio_chan->address = index++;
+
+		iio_chan++;
+	}
+
+	/* These channels are mandatory, they are used as reference points */
+	if (!vadc_get_channel(vadc, VADC_REF_1250MV)) {
+		dev_err(vadc->dev, "Please define 1.25V channel\n");
+		return -ENODEV;
+	}
+
+	if (!vadc_get_channel(vadc, VADC_REF_625MV)) {
+		dev_err(vadc->dev, "Please define 0.625V channel\n");
+		return -ENODEV;
+	}
+
+	if (!vadc_get_channel(vadc, VADC_VDD_VADC)) {
+		dev_err(vadc->dev, "Please define VDD channel\n");
+		return -ENODEV;
+	}
+
+	if (!vadc_get_channel(vadc, VADC_GND_REF)) {
+		dev_err(vadc->dev, "Please define GND channel\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static irqreturn_t vadc_isr(int irq, void *dev_id)
+{
+	struct vadc_priv *vadc = dev_id;
+
+	complete(&vadc->complete);
+
+	return IRQ_HANDLED;
+}
+
+static int vadc_check_revision(struct vadc_priv *vadc)
+{
+	u8 val;
+	int ret;
+
+	ret = vadc_read(vadc, VADC_PERPH_TYPE, &val);
+	if (ret)
+		return ret;
+
+	if (val < VADC_PERPH_TYPE_ADC) {
+		dev_err(vadc->dev, "%d is not ADC\n", val);
+		return -ENODEV;
+	}
+
+	ret = vadc_read(vadc, VADC_PERPH_SUBTYPE, &val);
+	if (ret)
+		return ret;
+
+	if (val < VADC_PERPH_SUBTYPE_VADC) {
+		dev_err(vadc->dev, "%d is not VADC\n", val);
+		return -ENODEV;
+	}
+
+	ret = vadc_read(vadc, VADC_REVISION2, &val);
+	if (ret)
+		return ret;
+
+	if (val < VADC_REVISION2_SUPPORTED_VADC) {
+		dev_err(vadc->dev, "revision %d not supported\n", val);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int vadc_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct iio_dev *indio_dev;
+	struct vadc_priv *vadc;
+	struct regmap *regmap;
+	int ret, irq_eoc;
+	u32 res;
+
+	regmap = dev_get_regmap(dev->parent, NULL);
+	if (!regmap)
+		return -ENODEV;
+
+	ret = of_property_read_u32(node, "reg", &res);
+	if (ret < 0)
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*vadc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	vadc = iio_priv(indio_dev);
+	vadc->regmap = regmap;
+	vadc->dev = dev;
+	vadc->base = res;
+	vadc->are_ref_measured = false;
+	init_completion(&vadc->complete);
+
+	ret = vadc_check_revision(vadc);
+	if (ret)
+		return ret;
+
+	ret = vadc_get_dt_data(vadc, node);
+	if (ret)
+		return ret;
+
+	irq_eoc = platform_get_irq(pdev, 0);
+	if (irq_eoc < 0) {
+		if (irq_eoc == -EPROBE_DEFER || irq_eoc == -EINVAL)
+			return irq_eoc;
+		vadc->poll_eoc = true;
+	} else {
+		ret = devm_request_irq(dev, irq_eoc, vadc_isr, 0,
+				       "spmi-vadc", vadc);
+		if (ret)
+			return ret;
+	}
+
+	ret = vadc_reset(vadc);
+	if (ret) {
+		dev_err(dev, "reset failed\n");
+		return ret;
+	}
+
+	indio_dev->dev.parent = dev;
+	indio_dev->dev.of_node = node;
+	indio_dev->name = pdev->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &vadc_info;
+	indio_dev->channels = vadc->iio_chans;
+	indio_dev->num_channels = vadc->nchannels;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id vadc_match_table[] = {
+	{ .compatible = "qcom,spmi-vadc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, vadc_match_table);
+
+static struct platform_driver vadc_driver = {
+	.driver = {
+		   .name = "qcom-spmi-vadc",
+		   .of_match_table = vadc_match_table,
+	},
+	.probe = vadc_probe,
+};
+module_platform_driver(vadc_driver);
+
+MODULE_ALIAS("platform:qcom-spmi-vadc");
+MODULE_DESCRIPTION("Qualcomm SPMI PMIC voltage ADC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Stanimir Varbanov <svarbanov@mm-sol.com>");
+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
