diff mbox

[1/2] rnndb: Separate MDP5 domain from MDSS domain

Message ID 1425906750-3472-1-git-send-email-sviau@codeaurora.org (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Stephane Viau March 9, 2015, 1:12 p.m. UTC 
MDP block is actually contained inside the MDSS block. For some
chipsets, the base address of the MDP registers is different from the
current (assumed) 0x100 offset.

Like CTL and  LM blocks, this changes introduce a dynamic offset
for the MDP instance, which can be found out at runtime, once the
MDSS HW version is read.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
---
 rnndb/mdp/mdp5.xml | 123 +++++++++++++++++++++++++++++------------------------
 1 file changed, 67 insertions(+), 56 deletions(-)
diff mbox

Patch

diff --git a/rnndb/mdp/mdp5.xml b/rnndb/mdp/mdp5.xml
index db2e15c..aedaa7c 100644
--- a/rnndb/mdp/mdp5.xml
+++ b/rnndb/mdp/mdp5.xml
@@ -9,6 +9,22 @@  xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd">
 <domain name="VBIF" width="32">
 </domain>
 
+<domain name="MDSS" width="32">
+	<reg32 offset="0x00000" name="HW_VERSION">
+		<bitfield name="STEP" low="0" high="15" type="uint"/>
+		<bitfield name="MINOR" low="16" high="27" type="uint"/>
+		<bitfield name="MAJOR" low="28" high="31" type="uint"/>
+	</reg32>
+
+	<reg32 offset="0x00010" name="HW_INTR_STATUS">
+		<bitfield name="INTR_MDP"  pos="0"  type="boolean"/>
+		<bitfield name="INTR_DSI0" pos="4"  type="boolean"/>
+		<bitfield name="INTR_DSI1" pos="5"  type="boolean"/>
+		<bitfield name="INTR_HDMI" pos="8"  type="boolean"/>
+		<bitfield name="INTR_EDP"  pos="12" type="boolean"/>
+	</reg32>
+</domain>
+
 <domain name="MDP5" width="32">
 
 	<enum name="mdp5_intf_type">
@@ -149,64 +165,59 @@  xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd">
 		<bitfield name="CLIENT2" low="16" high="23" type="mdp5_client_id"/>
 	</bitset>
 
-	<reg32 offset="0x00000" name="HW_VERSION"/>
-	<reg32 offset="0x00010" name="HW_INTR_STATUS">
-		<bitfield name="INTR_MDP"  pos="0"  type="boolean"/>
-		<bitfield name="INTR_DSI0" pos="4"  type="boolean"/>
-		<bitfield name="INTR_DSI1" pos="5"  type="boolean"/>
-		<bitfield name="INTR_HDMI" pos="8"  type="boolean"/>
-		<bitfield name="INTR_EDP"  pos="12" type="boolean"/>
-	</reg32>
-
-	<reg32 offset="0x00100" name="MDP_VERSION">
-		<bitfield name="MINOR" low="16" high="23" type="uint"/>
-		<bitfield name="MAJOR" low="28" high="31" type="uint"/>
-	</reg32>
+	<!-- Even though there is 1 MDP, length=2 to force dynamic offset usage -->
+	<array doffsets="mdp5_cfg->mdp.base[0]" name="MDP" length="2" stride="0x1000">
+		<reg32 offset="0x00000" name="HW_VERSION">
+			<bitfield name="STEP" low="0" high="15" type="uint"/>
+			<bitfield name="MINOR" low="16" high="27" type="uint"/>
+			<bitfield name="MAJOR" low="28" high="31" type="uint"/>
+		</reg32>
 
-	<reg32 offset="0x00104" name="DISP_INTF_SEL">
-		<bitfield name="INTF0" low="0"  high="7"  type="mdp5_intf_type"/>
-		<bitfield name="INTF1" low="8"  high="15" type="mdp5_intf_type"/>
-		<bitfield name="INTF2" low="16" high="23" type="mdp5_intf_type"/>
-		<bitfield name="INTF3" low="24" high="31" type="mdp5_intf_type"/>
-	</reg32>
-	<reg32 offset="0x00110" name="INTR_EN" type="MDP5_IRQ"/>
-	<reg32 offset="0x00114" name="INTR_STATUS" type="MDP5_IRQ"/>
-	<reg32 offset="0x00118" name="INTR_CLEAR" type="MDP5_IRQ"/>
-	<reg32 offset="0x0011C" name="HIST_INTR_EN"/>
-	<reg32 offset="0x00120" name="HIST_INTR_STATUS"/>
-	<reg32 offset="0x00124" name="HIST_INTR_CLEAR"/>
-	<reg32 offset="0x00128" name="SPARE_0">
-		<bitfield name="SPLIT_DPL_SINGLE_FLUSH_EN" pos="0"/>
-	</reg32>
+		<reg32 offset="0x00004" name="DISP_INTF_SEL">
+			<bitfield name="INTF0" low="0"  high="7"  type="mdp5_intf_type"/>
+			<bitfield name="INTF1" low="8"  high="15" type="mdp5_intf_type"/>
+			<bitfield name="INTF2" low="16" high="23" type="mdp5_intf_type"/>
+			<bitfield name="INTF3" low="24" high="31" type="mdp5_intf_type"/>
+		</reg32>
+		<reg32 offset="0x00010" name="INTR_EN" type="MDP5_IRQ"/>
+		<reg32 offset="0x00014" name="INTR_STATUS" type="MDP5_IRQ"/>
+		<reg32 offset="0x00018" name="INTR_CLEAR" type="MDP5_IRQ"/>
+		<reg32 offset="0x0001C" name="HIST_INTR_EN"/>
+		<reg32 offset="0x00020" name="HIST_INTR_STATUS"/>
+		<reg32 offset="0x00024" name="HIST_INTR_CLEAR"/>
+		<reg32 offset="0x00028" name="SPARE_0">
+			<bitfield name="SPLIT_DPL_SINGLE_FLUSH_EN" pos="0"/>
+		</reg32>
 
-	<array offset="0x00180" name="SMP_ALLOC_W" length="8" stride="4">
-		<reg32 offset="0" name="REG" type="mdp5_smp_alloc"/>
-	</array>
-	<array offset="0x00230" name="SMP_ALLOC_R" length="8" stride="4">
-		<reg32 offset="0" name="REG" type="mdp5_smp_alloc"/>
-	</array>
+		<array offset="0x00080" name="SMP_ALLOC_W" length="8" stride="4">
+			<reg32 offset="0" name="REG" type="mdp5_smp_alloc"/>
+		</array>
+		<array offset="0x00130" name="SMP_ALLOC_R" length="8" stride="4">
+			<reg32 offset="0" name="REG" type="mdp5_smp_alloc"/>
+		</array>
 
-	<enum name="mdp5_igc_type">
-		<value name="IGC_VIG" value="0"/>		<!-- 0x300 -->
-		<value name="IGC_RGB" value="1"/>		<!-- 0x310 -->
-		<value name="IGC_DMA" value="2"/>		<!-- 0x320 -->
-		<value name="IGC_DSPP" value="3"/>		<!-- 0x400 -->
-	</enum>
-	<array offsets="0x00300,0x00310,0x00320,0x00400" name="IGC" length="3" stride="0x10" index="mdp5_igc_type">
-		<array offset="0x00" name="LUT" length="3" stride="4">
-			<reg32 offset="0" name="REG">
-				<bitfield name="VAL" low="0" high="11"/>
-				<bitfield name="INDEX_UPDATE" pos="25" type="boolean"/>
-				<!--
-					not sure about these:
-						/* INDEX_UPDATE */
-						data = (1 << 25) | (((~(1 << blk_idx)) & 0x7) << 28);
-						MDSS_MDP_REG_WRITE(offset, (cfg->c0_c1_data[0] & 0xFFF) | data);
-				 -->
-				<bitfield name="DISABLE_PIPE_0" pos="28" type="boolean"/>
-				<bitfield name="DISABLE_PIPE_1" pos="29" type="boolean"/>
-				<bitfield name="DISABLE_PIPE_2" pos="30" type="boolean"/>
-			</reg32>
+		<enum name="mdp5_igc_type">
+			<value name="IGC_VIG" value="0"/>		<!-- 0x200 -->
+			<value name="IGC_RGB" value="1"/>		<!-- 0x210 -->
+			<value name="IGC_DMA" value="2"/>		<!-- 0x220 -->
+			<value name="IGC_DSPP" value="3"/>		<!-- 0x300 -->
+		</enum>
+		<array offsets="0x00200,0x00210,0x00220,0x00300" name="IGC" length="3" stride="0x10" index="mdp5_igc_type">
+			<array offset="0x00" name="LUT" length="3" stride="4">
+				<reg32 offset="0" name="REG">
+					<bitfield name="VAL" low="0" high="11"/>
+					<bitfield name="INDEX_UPDATE" pos="25" type="boolean"/>
+					<!--
+						not sure about these:
+							/* INDEX_UPDATE */
+							data = (1 << 25) | (((~(1 << blk_idx)) & 0x7) << 28);
+							MDSS_MDP_REG_WRITE(offset, (cfg->c0_c1_data[0] & 0xFFF) | data);
+					-->
+					<bitfield name="DISABLE_PIPE_0" pos="28" type="boolean"/>
+					<bitfield name="DISABLE_PIPE_1" pos="29" type="boolean"/>
+					<bitfield name="DISABLE_PIPE_2" pos="30" type="boolean"/>
+				</reg32>
+			</array>
 		</array>
 	</array>
 
@@ -224,7 +235,7 @@  xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd">
 		<bitfield name="INTF2_TG_SYNC" pos="8" type="boolean"/>
 	</reg32>
 <!-- check length/index.. -->
-    <array doffsets="mdp5_cfg->ctl.base[0],mdp5_cfg->ctl.base[1],mdp5_cfg->ctl.base[2],mdp5_cfg->ctl.base[3],mdp5_cfg->ctl.base[4]" name="CTL" length="5" stride="0x400">
+	<array doffsets="mdp5_cfg->ctl.base[0],mdp5_cfg->ctl.base[1],mdp5_cfg->ctl.base[2],mdp5_cfg->ctl.base[3],mdp5_cfg->ctl.base[4]" name="CTL" length="5" stride="0x400">
 		<array offsets="0x000,0x004,0x008,0x00C,0x010,0x024" name="LAYER" length="6" stride="4">
 			<reg32 offset="0" name="REG">
 				<bitfield name="VIG0"  low="0"  high="2"  type="mdp_mixer_stage_id"/>