diff mbox

[RFC/RFT,5/6] i2c: qup: Get rid of clock handling as its done using runtime callbacks

Message ID 1429778744-13352-6-git-send-email-rnayak@codeaurora.org (mailing list archive)
State RFC
Headers show

Commit Message

Rajendra Nayak April 23, 2015, 8:45 a.m. UTC 
Remove all clock handling from the driver as this is not handled from
within platform runtime callbacks.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 drivers/i2c/busses/i2c-qup.c | 74 ++++++++++----------------------------------
 1 file changed, 16 insertions(+), 58 deletions(-)

Comments

Kevin Hilman April 23, 2015, 9:16 p.m. UTC | #1 
Rajendra Nayak <rnayak@codeaurora.org> writes:

> Remove all clock handling from the driver as this is not handled from
> within platform runtime callbacks.

s/not/now/  ??

Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Rajendra Nayak April 24, 2015, 2:32 a.m. UTC | #2 
On 04/24/2015 02:46 AM, Kevin Hilman wrote:
> Rajendra Nayak <rnayak@codeaurora.org> writes:
>
>> Remove all clock handling from the driver as this is not handled from
>> within platform runtime callbacks.
>
> s/not/now/  ??

yeah, it was a typo. I will fix it here and in the next (6/6) patch.
thanks for taking a look.

regards,
Rajendra
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ivan T. Ivanov April 25, 2015, 7:01 a.m. UTC | #3 
Hi Rajendra,

> On Apr 23, 2015, at 11:45 AM, Rajendra Nayak <rnayak@codeaurora.org> wrote:
> 
> Remove all clock handling from the driver as this is not handled from
> within platform runtime callbacks.
> 
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> ---
> drivers/i2c/busses/i2c-qup.c | 74 ++++++++++----------------------------------
> 1 file changed, 16 insertions(+), 58 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
> index fdcbdab..465a2b2 100644
> --- a/drivers/i2c/busses/i2c-qup.c
> +++ b/drivers/i2c/busses/i2c-qup.c
> @@ -104,7 +104,6 @@ struct qup_i2c_dev {
> 	void __iomem		*base;
> 	int			irq;
> 	struct clk		*clk;
> -	struct clk		*pclk;
> 	struct i2c_adapter	adap;
> 
> 	int			clk_ctl;
> @@ -532,24 +531,6 @@ static struct i2c_adapter_quirks qup_i2c_quirks = {
> 	.max_read_len = QUP_READ_LIMIT,
> };
> 
> -static void qup_i2c_enable_clocks(struct qup_i2c_dev *qup)
> -{
> -	clk_prepare_enable(qup->clk);
> -	clk_prepare_enable(qup->pclk);
> -}
> -
> -static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
> -{
> -	u32 config;
> -
> -	qup_i2c_change_state(qup, QUP_RESET_STATE);
> -	clk_disable_unprepare(qup->clk);
> -	config = readl(qup->base + QUP_CONFIG);
> -	config |= QUP_CLOCK_AUTO_GATE;
> -	writel(config, qup->base + QUP_CONFIG);
> -	clk_disable_unprepare(qup->pclk);
> -}
> -
> static int qup_i2c_probe(struct platform_device *pdev)
> {
> 	static const int blk_sizes[] = {4, 16, 32};
> @@ -596,13 +577,10 @@ static int qup_i2c_probe(struct platform_device *pdev)
> 		return PTR_ERR(qup->clk);
> 	}
> 
> -	qup->pclk = devm_clk_get(qup->dev, "iface");
> -	if (IS_ERR(qup->pclk)) {
> -		dev_err(qup->dev, "Could not get iface clock\n");
> -		return PTR_ERR(qup->pclk);
> -	}
> -
> -	qup_i2c_enable_clocks(qup);
> +	pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC);
> +	pm_runtime_use_autosuspend(qup->dev);
> +	pm_runtime_enable(qup->dev);
> +	pm_runtime_get_sync(qup->dev);
> 
> 	/*
> 	 * Bootloaders might leave a pending interrupt on certain QUP's,
> @@ -673,22 +651,15 @@ static int qup_i2c_probe(struct platform_device *pdev)
> 	qup->adap.dev.of_node = pdev->dev.of_node;
> 	strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name));
> 
> -	pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC);
> -	pm_runtime_use_autosuspend(qup->dev);
> -	pm_runtime_set_active(qup->dev);
> -	pm_runtime_enable(qup->dev);
> -
> 	ret = i2c_add_adapter(&qup->adap);
> 	if (ret)
> -		goto fail_runtime;
> +		goto fail;
> 
> 	return 0;
> 
> -fail_runtime:
> +fail:
> 	pm_runtime_disable(qup->dev);
> 	pm_runtime_set_suspended(qup->dev);
> -fail:
> -	qup_i2c_disable_clocks(qup);
> 	return ret;
> }


Same thing like in MMC driver. Clocks should be explicitly
enabled because CONFIG_PM could be off.

Thanks,
Ivan--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Rajendra Nayak April 27, 2015, 2:36 a.m. UTC | #4 
Hi Ivan,

On 04/25/2015 12:31 PM, Ivan T. Ivanov wrote:
> Hi Rajendra,
>
>> On Apr 23, 2015, at 11:45 AM, Rajendra Nayak <rnayak@codeaurora.org> wrote:
>>
>> Remove all clock handling from the driver as this is not handled from
>> within platform runtime callbacks.
>>
>> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
>> ---
>> drivers/i2c/busses/i2c-qup.c | 74 ++++++++++----------------------------------
>> 1 file changed, 16 insertions(+), 58 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
>> index fdcbdab..465a2b2 100644
>> --- a/drivers/i2c/busses/i2c-qup.c
>> +++ b/drivers/i2c/busses/i2c-qup.c
>> @@ -104,7 +104,6 @@ struct qup_i2c_dev {
>> 	void __iomem		*base;
>> 	int			irq;
>> 	struct clk		*clk;
>> -	struct clk		*pclk;
>> 	struct i2c_adapter	adap;
>>
>> 	int			clk_ctl;
>> @@ -532,24 +531,6 @@ static struct i2c_adapter_quirks qup_i2c_quirks = {
>> 	.max_read_len = QUP_READ_LIMIT,
>> };
>>
>> -static void qup_i2c_enable_clocks(struct qup_i2c_dev *qup)
>> -{
>> -	clk_prepare_enable(qup->clk);
>> -	clk_prepare_enable(qup->pclk);
>> -}
>> -
>> -static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
>> -{
>> -	u32 config;
>> -
>> -	qup_i2c_change_state(qup, QUP_RESET_STATE);
>> -	clk_disable_unprepare(qup->clk);
>> -	config = readl(qup->base + QUP_CONFIG);
>> -	config |= QUP_CLOCK_AUTO_GATE;
>> -	writel(config, qup->base + QUP_CONFIG);
>> -	clk_disable_unprepare(qup->pclk);
>> -}
>> -
>> static int qup_i2c_probe(struct platform_device *pdev)
>> {
>> 	static const int blk_sizes[] = {4, 16, 32};
>> @@ -596,13 +577,10 @@ static int qup_i2c_probe(struct platform_device *pdev)
>> 		return PTR_ERR(qup->clk);
>> 	}
>>
>> -	qup->pclk = devm_clk_get(qup->dev, "iface");
>> -	if (IS_ERR(qup->pclk)) {
>> -		dev_err(qup->dev, "Could not get iface clock\n");
>> -		return PTR_ERR(qup->pclk);
>> -	}
>> -
>> -	qup_i2c_enable_clocks(qup);
>> +	pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC);
>> +	pm_runtime_use_autosuspend(qup->dev);
>> +	pm_runtime_enable(qup->dev);
>> +	pm_runtime_get_sync(qup->dev);
>>
>> 	/*
>> 	 * Bootloaders might leave a pending interrupt on certain QUP's,
>> @@ -673,22 +651,15 @@ static int qup_i2c_probe(struct platform_device *pdev)
>> 	qup->adap.dev.of_node = pdev->dev.of_node;
>> 	strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name));
>>
>> -	pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC);
>> -	pm_runtime_use_autosuspend(qup->dev);
>> -	pm_runtime_set_active(qup->dev);
>> -	pm_runtime_enable(qup->dev);
>> -
>> 	ret = i2c_add_adapter(&qup->adap);
>> 	if (ret)
>> -		goto fail_runtime;
>> +		goto fail;
>>
>> 	return 0;
>>
>> -fail_runtime:
>> +fail:
>> 	pm_runtime_disable(qup->dev);
>> 	pm_runtime_set_suspended(qup->dev);
>> -fail:
>> -	qup_i2c_disable_clocks(qup);
>> 	return ret;
>> }
>
>
> Same thing like in MMC driver. Clocks should be explicitly
> enabled because CONFIG_PM could be off.

Like I responded on the mmc driver patch thread [1], pm_clk_notify()
already takes care of enabling all clocks (during driver bind) in
case CONFIG_PM is disabled.

[1] http://www.spinics.net/lists/arm-kernel/msg413898.html

regards,
Rajendra
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index fdcbdab..465a2b2 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -104,7 +104,6 @@  struct qup_i2c_dev {
 	void __iomem		*base;
 	int			irq;
 	struct clk		*clk;
-	struct clk		*pclk;
 	struct i2c_adapter	adap;
 
 	int			clk_ctl;
@@ -532,24 +531,6 @@  static struct i2c_adapter_quirks qup_i2c_quirks = {
 	.max_read_len = QUP_READ_LIMIT,
 };
 
-static void qup_i2c_enable_clocks(struct qup_i2c_dev *qup)
-{
-	clk_prepare_enable(qup->clk);
-	clk_prepare_enable(qup->pclk);
-}
-
-static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
-{
-	u32 config;
-
-	qup_i2c_change_state(qup, QUP_RESET_STATE);
-	clk_disable_unprepare(qup->clk);
-	config = readl(qup->base + QUP_CONFIG);
-	config |= QUP_CLOCK_AUTO_GATE;
-	writel(config, qup->base + QUP_CONFIG);
-	clk_disable_unprepare(qup->pclk);
-}
-
 static int qup_i2c_probe(struct platform_device *pdev)
 {
 	static const int blk_sizes[] = {4, 16, 32};
@@ -596,13 +577,10 @@  static int qup_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(qup->clk);
 	}
 
-	qup->pclk = devm_clk_get(qup->dev, "iface");
-	if (IS_ERR(qup->pclk)) {
-		dev_err(qup->dev, "Could not get iface clock\n");
-		return PTR_ERR(qup->pclk);
-	}
-
-	qup_i2c_enable_clocks(qup);
+	pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC);
+	pm_runtime_use_autosuspend(qup->dev);
+	pm_runtime_enable(qup->dev);
+	pm_runtime_get_sync(qup->dev);
 
 	/*
 	 * Bootloaders might leave a pending interrupt on certain QUP's,
@@ -673,22 +651,15 @@  static int qup_i2c_probe(struct platform_device *pdev)
 	qup->adap.dev.of_node = pdev->dev.of_node;
 	strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name));
 
-	pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC);
-	pm_runtime_use_autosuspend(qup->dev);
-	pm_runtime_set_active(qup->dev);
-	pm_runtime_enable(qup->dev);
-
 	ret = i2c_add_adapter(&qup->adap);
 	if (ret)
-		goto fail_runtime;
+		goto fail;
 
 	return 0;
 
-fail_runtime:
+fail:
 	pm_runtime_disable(qup->dev);
 	pm_runtime_set_suspended(qup->dev);
-fail:
-	qup_i2c_disable_clocks(qup);
 	return ret;
 }
 
@@ -697,7 +668,6 @@  static int qup_i2c_remove(struct platform_device *pdev)
 	struct qup_i2c_dev *qup = platform_get_drvdata(pdev);
 
 	disable_irq(qup->irq);
-	qup_i2c_disable_clocks(qup);
 	i2c_del_adapter(&qup->adap);
 	pm_runtime_disable(qup->dev);
 	pm_runtime_set_suspended(qup->dev);
@@ -707,43 +677,31 @@  static int qup_i2c_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int qup_i2c_pm_suspend_runtime(struct device *device)
 {
+	u32 config;
 	struct qup_i2c_dev *qup = dev_get_drvdata(device);
 
 	dev_dbg(device, "pm_runtime: suspending...\n");
-	qup_i2c_disable_clocks(qup);
+	qup_i2c_change_state(qup, QUP_RESET_STATE);
+	config = readl(qup->base + QUP_CONFIG);
+	config |= QUP_CLOCK_AUTO_GATE;
+	writel(config, qup->base + QUP_CONFIG);
 	return 0;
 }
 
 static int qup_i2c_pm_resume_runtime(struct device *device)
 {
+	u32 config;
 	struct qup_i2c_dev *qup = dev_get_drvdata(device);
 
-	dev_dbg(device, "pm_runtime: resuming...\n");
-	qup_i2c_enable_clocks(qup);
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-static int qup_i2c_suspend(struct device *device)
-{
-	qup_i2c_pm_suspend_runtime(device);
-	return 0;
-}
-
-static int qup_i2c_resume(struct device *device)
-{
-	qup_i2c_pm_resume_runtime(device);
-	pm_runtime_mark_last_busy(device);
-	pm_request_autosuspend(device);
+	dev_dbg(device, "pm_runtime: suspending...\n");
+	config = readl(qup->base + QUP_CONFIG);
+	config &= ~QUP_CLOCK_AUTO_GATE;
+	writel(config, qup->base + QUP_CONFIG);
 	return 0;
 }
 #endif
 
 static const struct dev_pm_ops qup_i2c_qup_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(
-		qup_i2c_suspend,
-		qup_i2c_resume)
 	SET_RUNTIME_PM_OPS(
 		qup_i2c_pm_suspend_runtime,
 		qup_i2c_pm_resume_runtime,