@@ -2,6 +2,7 @@ Qualcomm adreno/snapdragon hdmi output
Required properties:
- compatible: one of the following
+ * "qcom,hdmi-tx-8996"
* "qcom,hdmi-tx-8994"
* "qcom,hdmi-tx-8084"
* "qcom,hdmi-tx-8974"
@@ -21,6 +22,7 @@ Required properties:
Optional properties:
- qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
- qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin
+- power-domains: reference to the power domain(s), if available.
- pinctrl-names: the pin control state names; should contain "default"
- pinctrl-0: the default pinctrl state (active)
- pinctrl-1: the "sleep" pinctrl state
@@ -35,6 +37,7 @@ Example:
reg-names = "core_physical";
reg = <0x04a00000 0x1000>;
interrupts = <GIC_SPI 79 0>;
+ power-domains = <&mmcc MDSS_GDSC>;
clock-names =
"core_clk",
"master_iface_clk",
@@ -328,6 +328,9 @@ fail:
.item ## _names = item ##_names_ ## entry, \
.item ## _cnt = ARRAY_SIZE(item ## _names_ ## entry)
+static const char *pwr_reg_names_none[] = {};
+static const char *hpd_reg_names_none[] = {};
+
static struct hdmi_platform_config hdmi_tx_8660_config = {
.phy_init = hdmi_phy_8x60_init,
};
@@ -367,18 +370,26 @@ static struct hdmi_platform_config hdmi_tx_8084_config = {
.hpd_freq = hpd_clk_freq_8x74,
};
-static const char *hpd_reg_names_8x94[] = {};
-
static struct hdmi_platform_config hdmi_tx_8994_config = {
.phy_init = NULL, /* nothing to do for this HDMI PHY 20nm */
HDMI_CFG(pwr_reg, 8x74),
- HDMI_CFG(hpd_reg, 8x94),
+ HDMI_CFG(hpd_reg, none),
+ HDMI_CFG(pwr_clk, 8x74),
+ HDMI_CFG(hpd_clk, 8x74),
+ .hpd_freq = hpd_clk_freq_8x74,
+};
+
+static struct hdmi_platform_config hdmi_tx_8996_config = {
+ .phy_init = NULL,
+ HDMI_CFG(pwr_reg, none),
+ HDMI_CFG(hpd_reg, none),
HDMI_CFG(pwr_clk, 8x74),
HDMI_CFG(hpd_clk, 8x74),
.hpd_freq = hpd_clk_freq_8x74,
};
static const struct of_device_id dt_match[] = {
+ { .compatible = "qcom,hdmi-tx-8996", .data = &hdmi_tx_8996_config },
{ .compatible = "qcom,hdmi-tx-8994", .data = &hdmi_tx_8994_config },
{ .compatible = "qcom,hdmi-tx-8084", .data = &hdmi_tx_8084_config },
{ .compatible = "qcom,hdmi-tx-8974", .data = &hdmi_tx_8974_config },
The HDMI controller is new in MDP5 v1.7. As of now, this change doesn't reflect the novelty and only adds the basics so the probe gets triggered. Signed-off-by: Stephane Viau <sviau@codeaurora.org> --- Documentation/devicetree/bindings/drm/msm/hdmi.txt | 3 +++ drivers/gpu/drm/msm/hdmi/hdmi.c | 17 ++++++++++++++--- 2 files changed, 17 insertions(+), 3 deletions(-)